• iPhone 15 Plus vs. Pro Max
  • 3 Key Tech Trends to Watch in 2024

Windows Error Recovery: How to Fix It When Windows Failed to Start

How to restart, troubleshoot, repair, refresh, and reinstall Windows

how to fix a windows error recovery

  • Southern Methodist University
  • Spring Arbor University
  • The Ultimate Laptop Buying Guide

Windows failed to start could appear as a blue screen with an error, a continual reboot loop, or nothing showing on the screen at all. A computer might fail to start after being shut down or following a restart.

Instructions in this article apply to Windows 10, Windows 8, and Windows 7.

Cause of Windows Failing to Start

When a Windows laptop or desktop computer fails to start, the cause may be a disconnected device, a missing file, an unsuccessful update, or failing hardware.

How to Fix Windows Failing to Start

Follow the steps below in sequence to identify and fix the problem. In most cases, a bit of troubleshooting can get your computer working again. Still, some issues may require you to replace failed hardware.

Restart the computer . Restarting restores access if the problem was simply an unusual glitch during the startup process.

On a desktop system, check the connections . If you use a keyboard or mouse with a cable, unplug and then re-plug each to confirm that the devices are connected. A disconnected keyboard, for example, can cause a computer to halt during the startup process. Similarly, make sure the cable from the computer to the display is connected.

On a desktop system, make sure the power indicator light is on . If you can't see the light, the power supply may have failed. If nothing happens when you press the power button, you may need to replace the power supply.

Remove the battery . On a laptop system with an easy-to-remove battery, unplug all power cables and remove the battery. Then, with the battery out of the system, plug in the AC power cable and connect it to the laptop. Start up the computer. If it starts successfully, the problem is the laptop battery.

Let updates complete. If you see any display on the screen, wait a bit longer. Windows often attempts to install system, application, and driver updates during the startup process. If you have an older or slower computer, these updates may take a significant amount of time to install. In some problematic cases, leave the computer on overnight, then check it the next morning.

Start Windows with the last known good configuration . This option attempts to start the computer with the recent device, registry, and operating system changes reverted to settings that worked. This allows the computer to recover from a failed system or device driver update or a misconfigured registry entry. (When Windows fails to start twice in a row, you should have access to the Advanced Boot Options menu .)

If the computer successfully boots with this method, don't re-apply system or device driver updates, since these updates may be the source of the problem. Check with Microsoft Support or the device manufacturer's site for recent news or information.

Run Startup Repair (also known as Automatic Repair in older versions of Windows). Startup Repair scans the computer and attempts to fix missing or damaged system files. It can take more than a few minutes to complete and may require that you restart the computer. In some cases, you might need to run Startup Repair up to three times to resolve startup issues.

Perform a system restore . Use a recent restore point to recover your system. A system restore reverts the system, drivers, and registry to an earlier point in time.

Scan the computer for malware . Some signs that the computer may have malware include virus warnings, notices, or other unusual messages displayed as the computer starts.

Reset the PC . A reset leaves you with Windows and the apps originally installed on the computer. People often initiate a Windows Reset when they're ready to give the computer to someone else. A reset erases system customizations and changes, removes installed applications, and deletes data. It can be an effective way to return a problematic system into a usable computer.

Back up your personal files elsewhere before you do a reset. A reset erases your files.

Test a noisy hard drive . A failed or failing drive may prevent Windows from booting correctly. Hard drives with spinning parts often emit grinding or clanking sounds when they fail. Solid-state drives (SSDs) typically stop working with no audible indicators. If a drive fails, you may install Windows on a new drive. If your data isn't backed up elsewhere, use data recovery software to retrieve your files from the failed drive.

Perform a clean install . If none of the above steps worked, perform a clean install of Windows. This process erases everything on the drive and replaces it with a new installation of Windows.

Get the Latest Tech News Delivered Every Day

  • How to Fix a Computer That Won't Start in Safe Mode
  • How to Fix Problems During the Windows Login Process
  • How to Fix Msvcrt.dll Not Found or Missing Errors
  • How to Fix Steam.dll Not Found or Missing Errors
  • How to Fix Mfc110.dll Not Found or Missing Errors
  • How to Fix 'Msvbvm50.dll Not Found or Missing' Errors
  • How to Fix Shell32.dll Not Found or Missing Errors
  • How to Fix Mfplat.dll Not Found or Missing Errors
  • How to Fix Freezing & Other Issues During Windows Startup
  • Error Code 0xc00000e9: What It Means and How to Fix It
  • How to Fix Msvcp100.dll Not Found or Missing Errors
  • How to Fix Comctl32.dll Not Found or Missing Errors
  • How to Fix Wlanapi.dll Not Found or Missing Errors
  • How to Fix Ogg.dll Not Found or Missing Errors
  • How to Fix Normaliz.dll Not Found or Missing Errors
  • How to Fix Msxml4.dll Not Found or Missing Errors

Techie Loops

Creating Loop Around Tech

windows 10 error recovery

5 Methods to Fix Windows Error Recovery in Windows 10

For whatever reason Windows does not boot, Windows needs to be fixed so that you can use your system. This article will let you know the different ways to repair Windows 10.

Method 1: Using by Windows 10 Start-up Repair

If Windows 10 does not boot and does not boot, you do not see the Windows 10 login or desktop , the first step is to use Windows 10 Start-up Repair.

windows error recovery

Follow the instructions below:

Go to the (Windows 10 the advanced menu Start-up Options menu)

There are several ways to do this. There are several ways to do this. To get advanced Windows 10 start-up options, press the F11 keypad a few times immediately after turning on your Windows 10 laptop or computer.

To get advanced Windows 10 start-up options, press the F11 keypad a few times immediately after turning on your Windows 10 laptop or computer .

You can also boot from the disk from which you are installing Windows 10 and bring up the Windows 10 boot options page. If you are installing Windows 10 using a USB flash drive, you can use Flash to boost Windows 10 repair options.

Once you successfully booted the computer then open the Windows 10 Advanced Start-up Options menu and start troubleshooting the Windows 10 Option. So select the Troubleshoot option. On the next screen that appears, click advanced options.

Now click on the Start-up Repair option

Thus begins the repair of Windows 10. According to Windows 10, it goes back to the factory settings, and after a while, depending on the power of your computer or laptop, the Windows 10 boot screen appears and Windows comes up. Keep in mind that if there is no real problem with Windows booting up, repairing Windows 10 will not work and there will be no troubleshooting in Windows 10 .

Method 2: Using the Windows 10 restore system

Windows 10 comes with a set of built-in applications. These peripherals applications can be removed and added. Windows peripherals can be managed.

One of these programs is System Restore. One way to fix Windows Error Recovery in windows 10 is to use the Windows 10 restore system. Follow the instructions below to restore Windows 10:

windows recovery

  • Go to the Start-up advanced options menu of Windows 10 (Step 1 in the first method: use the start-up repair of Windows 10).
  • Click on System Restore.

After clicking on the restore system, the computer will reboot (you may be interested in the difference between reboot and restart).

  • Select the displayed username.
  • Enter your Windows password or account.
  • Select the restore point you want from the menu and follow the system commands. You should not be able to use this method if you already not created a restore point.

Method 3: Perform a disk scan

The cause of Windows error recovery may be system file corruption. If you can log in to the operating system, even in Safe Mode, you should scan the system files for potential problems. Keep in mind that disk scans sometimes replace corrupted files with healthy versions, and we do not notice some problems.

Scanning hard disks or drives is one way to repair system files. Follow the instructions below to scan your system files:

  • In the Windows 10 desktop toolbar search box, type cmd.
  • Right-click on the Command Prompt icon from the list of search results and select Run as Administrator.
  • Thus, the Prompt command is opened with the management license. Of course, instead of steps 1 and 2, you can right-click on the Windows 10 Start Button and open the Command prompt (Administrator) option.

Now in DOS environment, type sfc/scannow and press Enter key on the keyboard. This command will scan your computer or laptop drives. This process is time-consuming and takes some time. This will scan Windows 10 system files and replace any corrupted files with the original version. After fixing the problem, it is better to make a backup of your Windows 10 and create a restore point.

Method 4: Reset Windows 10 to fix windows error recovery

As you know, reset windows 10 is one of the easiest ways to fix windows error recovery. If you want to have a clean start, without any software or driver problems; you do not have to reinstall Windows.

Instead, you can do one thing i.e. use Windows 10 built-in reset feature; it will take your computer just like first day of Windows installation.

This is mostly called resetting Windows 10 to factory settings. Thus, Windows 10 goes to the installation time, before software, special equipment, or data is added. Note that if you want to sell your computer or laptop or give it to someone else, resetting Windows 10 is a good way to clear the system of all personal and private information.

Bonus Tip: If you are interested in IT certifications , check out cisco ccna .

Method 5: Reinstall Windows 10

If all Actions fail, and you do not even have access to your Windows 10 PC reset, it is better to reinstall Windows. At this point, you do not need to activate or purchase Windows .

windows error recovery

Just make sure your C drive has more than 4GB of free space, as downloading Windows 10 takes up so much space. To install Windows 10, you can visit Microsoft Windows 10 download and Download the tool option from the Software download section.

As you know there are a few ways to fix the windows error recovery. This article has pointed some ways to fix this problem and they can efficient in this way. If all the instruction will be done correctly then your problem will be fixed. If you are wondering why you should do Windows Error, read this article carefully!

Salman Zafar

Salman Zafar is a serial entrepreneur, digital marketer, writer and publisher. He is the Founder of Techie Loops

One thought on “ 5 Methods to Fix Windows Error Recovery in Windows 10 ”

  • Pingback: 0x0 0x0 Window Error | How to Solve it in easy steps? - Tommy Guide

Leave a Reply Cancel reply

Search techie loops, latest articles.

  • Enhancing Your Sprinter and Metris with CAMELO’s Latest Tech Gadgets
  • Should You Buy a Used Laptop or a Desktop PC?
  • Unveiling the Power of Data Warehouse Tools: Transforming Raw Data Into Strategic Insights
  • 5 Essential Tips to Find the Best Literary Agent
  • Tech Toolbox: 11 Essential Apps for Seamless Remote Collaboration

Subscribe to Techie Loops

Enter your email address to subscribe

Email Address

  • United States
  • Netherlands
  • New Zealand
  • United Kingdom

How to repair Windows 10 (and 11) in 4 steps

When windows 10 gets wonky, try this series of repair techniques — in this order — to attempt to set things right..

Ed Tittel

Computerworld |

mechanic wrench fix engine repair

The Windows 10 (or 11) repair drill

Step 1: using dism and sfc for system repair, step 2: try a recent restore point or image backup.

  • Step 3: In-place upgrade to current Windows 10 version
  • Step 4: Completely reinstall Windows 10
  • Picking up the pieces after the repair
  • The Windows 11 situation

Sometimes a Windows 10 system starts misbehaving to the point where repair is needed. This often takes the form of worsening performance or stability, and can originate from damage to, loss of, or corruption of Windows system files typically found in the  C:\Windows  folder hierarchy. When that happens, users would be well advised to break out the following routine to help them set things back to rights.

I initially wrote this story in 2016, but as Windows 10 has evolved over time, some of the steps have changed a bit. I’ve now updated it for the latest versions of Windows 10. That said, most of these approaches also work with Windows 7 and 8 (with slight variations), and the advice here applies almost identically to Windows 11 , which Microsoft is gradually rolling out to Windows 10 users whose hardware can support the new OS via Windows Update from October 2021 into early 2022.

The idea is to first try the initial step in the sequence. If that doesn’t fix what’s broken, advance to the next step. Keep working through the steps in order until you reach the end, and you are bound to fix the vast majority of problems. (The only remaining step at that point would be to replace the system on which the software is running, and that’s outside the scope of this story.)

The amount of time and effort required for each step goes up incrementally. Some steps involve additional work to restore the prior state of your PC more or less back to where it was prior to taking that step. Thus, the most important bit of advice I can dispense for those who must venture beyond Step 1 is this: make a complete backup of your system to provide a source for files and information that might otherwise go missing. Ignore this advice at your own risk.

But first: back it up before you lose it!

Any time you make major changes to a Windows system, such as installing a major application suite like Microsoft Office or performing an OS upgrade or repair, it’s a good idea to begin that process with a complete backup. The important thing is to use a backup tool that creates an image backup of your boot/system drive. That will allow you to rewrite that drive and restore your system to normal operation should anything go wrong with your changes or repairs. See my article “ How to make a Windows 10 or 11 image backup ” for instructions.

Since I wrote the original version of this story, I’ve obtained direct advice from Microsoft that it’s best to run DISM before running the System File Checker, a.k.a. SFC. Hence, I am reversing the order of events for this step. I’ll echo Microsoft and say “Always run DISM first, then SFC second, not vice versa.”

DISM is the Deployment Image Servicing and Management tool. It’s a kind of Swiss Army knife for working with Windows operating system images, both offline and online. DISM can often fix things that SFC can detect but that it cannot itself fix. DISM supports a raft of capabilities with switches and parameters to match, but basic system file repair syntax is reasonably easy (though it often requires multiple passes before it can set things straight).

You must run DISM in an Administrator: Command Prompt window (press the Windows key + X combination and select Command Prompt (Admin) from the resulting pop-up menu) or in an Administrative PowerShell or Windows Terminal session. Here’s some sample syntax (consult the TechNet DISM Technical Reference for all the gory details):

dism /online /cleanup-image /checkhealth

Most of the time when you run this command, the output will find nothing amiss, as shown in Figure 1:

Figure 1: DISM can check the health of any Windows image. Here, it reports all is well on a production PC.

The /checkhealth command simply checks the running image (that’s what /online tells it to do) to see if it can detect any damage or corruption. Because it’s only checking file hashes and signatures, this command completes in under one minute on most machines. The good thing about /checkhealth is that it not only tells you if it finds damage but if that damage is repairable or non-repairable. If it’s repairable, you can proceed to the /restorehealth option (covered in the following paragraphs); if it’s non-repairable, jump to Step 2.

If DISM reports that component store corruption is found and is repairable, you should attempt repairs. That syntax reads:

dism /online /cleanup-image /restorehealth

Even if errors were detected in the preceding step, this command should complete successfully. It replaces corrupt or questionable elements in the Windows Side-by-Side (WinSxS) store, reading from a local copy of your Windows image files.

The  /restorehealth  command can be tricky to use. Because it can actually repair a Windows image, it needs a source from which to attempt such repairs. You can omit the  /source  option, but if you do, the command will try to grab its files from Windows Update over the internet. This may or may not work, depending on firewall settings on your network.

A safer bet is to point DISM at a known good source for Windows image components on the local machine (or on your local network). This can be a Windows image ( .wim ) file or a compressed Windows image ( .esd , which is used for electronic software downloads of Windows installations, as the file extension is meant to communicate). You can also point to a separate copy of a  WinSXS  folder (the usual directory path is C:\Windows\WinSXS ) taken from another PC with similar or identical hardware for which  dism ... /checkhealth  returns a clean bill of health.

The syntax for image files is where things can get interesting. To point to the  install.wim  file that shows up in ISO downloads for the Windows 10 installer on a USB flash drive designated  L: , for example, you must use the following source specification (which uses the first image it finds inside the .wim file, designated :1 ):

/source:WIM:L:\sources\install.wim:1

To use an ESD file, change the wim items to esd, as shown here:

/source:ESD:L:\sources\install.esd:1

If you run into difficulties getting this to work, try adding the  /limitaccess  switch to your command strings. This stops DISM from attempting to grab source files from Windows Update, which it will sometimes do even if pointed at a local source. If you just can’t get either of these to work, try a  WinSXS  folder instead.

Note:  the version and language for the  /source  image must be identical to that for the image to be repaired. This may mean using  HeiDoc.net , UUP Dump , or Microsoft’s  Media Creation Tool  to grab the correct Windows 10 or 11 version/build (see my article “ The best places to find Windows 10 ISOs ” for details on how to use these sources) and creating media or mounting the ISO file to give DISM the right  /source  from which to work. For Windows 11, check the Windows Insider Preview Downloads page to grab the proper ISO.

Figure 2 shows typical DISM output using /restorehealth :

Figure 2: Even when DISM /checkhealth finds errors, the /restorehealth option is usually successful. (Click image to enlarge it.)

Next, it’s time to run SFC, Microsoft’s System File Checker. To quote  TechNet , the system file checker “scans and verifies versions of all protected system files.” It can tell you if it finds anything amiss if you enter SFC /scannow  at the command line.

As with DISM, you must run SFC from an Administrator: Command Prompt or an Administrative PowerShell or Windows Terminal session. This command takes 5 to 10 minutes to complete, depending on your PC hardware. Unlike DISM, SFC scans and initiates repairs within a single command.

Figure 3 shows sample output when SFC finds files in need of repair. If this occurs on your PC, repeat the /scannow command until it gives the clear bill of health shown in Figure 4.

Figure 3: If SFC finds questionable files, it will repair them if it can. Here, it succeeds. (Click image to enlarge it.)

Figure 4: Eventually, SFC will report finding no “integrity violations.” You’re done! (Click image to enlarge it.)

In my experience, 80% of all problems will be solved at this point, so the odds are in your favor that you won’t have to keep going. But if DISM can’t fix your Windows image, or SFC can’t or won’t make repairs to your system files, proceed to Step 2.

A restore point is a snapshot of a Windows PC’s OS state from a specific point in time. If enabled, the Windows System Restore capability can create and maintain restore points on your behalf. To see if this is an option on your target machine, type restore point into the Windows 10 search box. The System Properties window should open to the System Protection tab, shown in Figure 5.

Figure 5: Access available restore points using the “System Restore…” button.

To look at restore points, you must work through the System Restore wizard. Click the System Restore... button to launch the wizard, then click the Next button on the first pane of the wizard to see a list of restore points available to you. (If you don’t like what you see, or you don’t see something from before your troubles started on this machine, click the Show more restore points checkbox for a complete list of what’s available to you.) Click the restore point to which you would like to revert.

Figure 6 shows the lone restore point available on my test PC.

Figure 6: For this story, I created a restore point named “Test restore point.”

Because I have only one restore point — I don’t use them much any more, for reasons I’ll explain coming up — I picked that item to show you what appears when you select a restore point in this utility. If you click the Scan for affected programs button it will tell you if any programs or drivers will be affected by rolling back to the restore point you’ve selected. In this case, there’s no impact, as shown in Figure 7. If something were to be affected, it would show up in either the top or bottom list in that results pane.

Figure 7: The current restore point has no impact. But older restore points will provide a list of drivers and programs that need to be reinstalled if you revert to that restore point.

It usually takes between 5 and 15 minutes to revert to a restore point. The amount of additional effort to catch back up to where you left off depends on the number of items that need to be installed or updated, as shown in Figure 7. This can take from minutes to an hour or more depending on size and scope.

All this said, I don’t use Restore Points anymore. I’ve run into occasional issues with failed restores, and I’ve seen plenty of discussion in Microsoft Community and TenForums among other users who’ve had similar problems. My preference is to restore an image built using Macrium Reflect (free or commercial; I use both). It’s faster than System Restore, and I’ve never been unable to restore a valid, integrity-checked Reflect backup. You decide what’s best for you; I use Reflect.

Restoring an image backup is much like reverting to a restore point: choose the image (usually by date and time) to which you’d like to roll back, then initiate the restore procedure. For example, Macrium Reflect offers a “Restore” menu, then allows you to browse stored backup files to pick the one you want in an Explorer-based Open window.

If reverting to a restore point or image backup doesn’t work (or you don’t have either of these), it’s time to move on to Step 3.

  • Operating Systems
  • Small and Medium Business

Windows power user tips

how to fix a windows error recovery

How to repair and restore Windows 10

Here's how to repair and restore Windows 10 in a few easy steps.

Repair Windows 10

If you're still using Windows 10 (my preference too), but now find it's struggling to load, or maybe it starts up but crashes a lot. Either way, you need to fix the problem before you can use your laptop . If your screen is rotated, we have an easy  fix for that. If the operating system is booting slower than molasses, you can also use power settings to speed up its launch . Otherwise, here are a few ways to repair Windows 10 . By now the way, if you're wondering how to stop a Windows update from automatically restarting your PC , we've got you covered. 

  • Become a Windows 10 wiz with our tips and tricks
  • How to Erase a Recovery Partition in Windows
  • How to install Windows 10 apps to an SD Card or USB Drive

Method 1: Use Windows Startup Repair

If Windows 10 is unable to boot up and takes you to the login screen or the desktop, your first step should be to use Startup Repair. Here's how:

1.  Navigate to the Windows 10 Advanced Startup Options menu. On many laptops, hitting F11 as soon as you power on will get you to the Windows 10 Advanced Startup Options . Booting off an install disk and hitting Next then Repair offers a secondary option.

Once your computer has booted, select Troubleshoot .

And then you'll need to click Advanced options .

2. Click Startup Repair.

Windows will take anywhere from a few seconds to a few minutes to attempt to fix the problem. (It may not be able to.) If you don't actually have a startup problem, it will also say it can't fix the problem.

Method 2: Use Windows Restore

1. Complete step 1 from the previous method to get to Windows 10's Advanced Startup Options menu .

2. Click System Restore.

The computer will reboot.

3. Select your username.

4. Enter your password .

5. Select a restore point from the menu and follow the prompts. (If you have no restore points, you can't use this method.) 

Method 3: Perform a Disk Scan

Your Windows 10 problems may stem from a corrupt file. If you can boot into the operating system — even if you have to boot into safe mode — you should perform a file scan to check for problems. 

1. Type "cmd" into the main search box.

2. Right click on Command Prompt and select Run as Administrator.

3. Type sfc /scannow at command prompt and hit Enter.

The scan will take a while; it should fix any corrupted files it finds.

Method 4: Reset Windows 10

If you want to get a clean start, free from rogue software and drivers, you usually don't need to do a full install. Instead, Windows 10 provides a built-in reset feature that takes your computer back to the way it was before you had any software, special devices, or data preloaded. (On a side note, if you're giving your computer to someone else, resetting is a good way to wipe it.) 

See our tutorial on how to reset Windows 10 to refresh your PC.

Method 5: Reinstall Windows 10 from scratch

If all else fails and you can't even reset your Windows computer, you can reinstall the OS entirely. You won't even need an activation number or any proof of purchase, either. Just make sure you have more than 4GB of space available, as that's how much space the file you'll download takes up. Here's how to reinstall Windows 10:

1. Visit this page and click Download tool now.

2. Click on the download link at the bottom of your screen .

3. Click Accept.

4.  Select Create installation media for another PC and click Next.

7.  Select ISO file and click Next.

7. Click Finish.

7. Open the Windows ISO file you downloaded .

8. Open Setup.

9. Click Next.

10. Click Accept.  Be prepared to wait; this next part may take a while.

11. Click Install. Again, this will take a moment while your system restarts.

12. Wait for your system to restart and install Windows 10.

You've reinstalled Windows 10! We hope this guide fixed your problems. Check out the table of contents below for more fixes.

  • How to get help in Windows 10
  • How to defragment your hard drive in Windows 10

Windows 10 annoyances and problems

  • Previous Tip
  • Repair Windows 10
  • Remove the Lock Screen
  • Disable or Enable Grayscale Mode
  • Set Compatibility Mode for Apps
  • Access the BIOS on a Windows 10 PC
  • Stop Windows Update from Automatically Restarting Your PC
  • Turn Off App Notifications
  • Fix a Slow-Opening Windows Downloads Folder
  • Disable Personalized Ads on Microsoft Sites and Apps
  • Stop Skype’s Annoying Auto Updates
  • Fix a 'Boot Configuration Data File is Missing' Error
  • Clear the Run Command's History
  • Disable Cortana
  • Uninstall and Restore Built-in Apps
  • Restore a Missing Battery Icon
  • Fix a Boot Configuration File Error
  • Get to the Advanced Startup Options Menu
  • Delete a Locked File
  • Restart without Rebooting
  • Roll Back Windows 10 to an Earlier Version
  • Disable Automatic Driver Downloads
  • Disable Internet Explorer
  • Pause Windows Updates for Up to 35 Days
  • Use Battery Saver
  • Downgrade to Windows 10 S
  • Save Netflix Videos for Offline Viewing
  • All Windows 10 Tips
  • Worst Windows 10 Annoyances
  • Disable Password Prompt on Wake

Stay in the know with Laptop Mag

Get our in-depth reviews, helpful tips, great deals, and the biggest news stories delivered to your inbox.

  • Mark Anthony Ramirez

Windows 11's next major update may be the end of the line for these old CPUs

3 ways to lock your Windows 11 laptop — easily secure your PC

HP Presidents Day sale 2024: 15 best deals still you can still get

Most Popular

By Madeline Ricchiuto 17 February 2024

By Sarah Chaney 16 February 2024

By Madeline Ricchiuto 16 February 2024

By Rael Hornby 16 February 2024

By Mark Anthony Ramirez 15 February 2024

By Rael Hornby 15 February 2024

By Sarah Chaney 14 February 2024

By Mark Anthony Ramirez 14 February 2024

  • 2 HP Presidents Day sale 2024: 15 best deals still you can still get
  • 3 Extended Dell Presidents Day sale 2024: Up to $1000 off Dell and Alienware laptops
  • 4 Acer Swift Edge 16 and Swift Go 14 go all in on AMD Ryzen AI
  • 5 Best Buy Presidents Day sale 2024: 29 best deals still available

MiniTool

  • Backup Tips

If You Get Windows Error Recovery Screen in Windows 7, Fix It!

Sometimes you start up your Windows 7 computer but you get the Windows error recovery screen saying the system failed to start and a hardware or software change might cause it. What should you do if you are bothered by this Windows error? Now, you can get solutions from this post written by MiniTool to get rid of the black screen error.

Windows Error Recovery Windows 7

Although Microsoft has ended the support of Windows 7 since January 14, 2020, there are still many users running Windows 7 on their PCs since its ease of use and reliability.

But, Windows boot problems always occur no matter which operating system you are using (Windows 7, 8, or 10). During the startup of the Windows operating system, a blue screen or black screen appears along with an error message. Today, we will discuss a Windows 7 black screen error – Windows error recovery.

When booting up Windows 7, the Windows error recovery screen comes out of the blue and you see an error message “Windows failed to start. A recent hardware or software change might be the cause”, as shown below. Sometimes, you get another interface of Windows error recovery with different options.

The reasons behind this error are various, such as a recent hardware or software change, damaged system files, missing or corrupted Boot Configuration Data (BCD), compromised file system integrity, etc. When you come across the issue, how can you fix it?

You can get some solutions from the screen: use an installation disc to repair your computer in WinRE , or perform Startup Repair and start Windows normally by using the arrow keys.

So, you can follow the suggestions of Windows. If these simple tips couldn’t help, some other solutions are described here.

What Is Microsoft Error Lookup Tool? How to Download & Use It?

What is Microsoft Error Lookup Tool? How to download Microsoft Error Lookup Tool and use it on your PC? Find answers from this post now.

How to Fix Windows Error Recovery Loop

Method 1: choose start windows normally.

When seeing the Windows 7 error recovery interface, the first thing you can do is to use the arrow keys to choose Start Windows Normally . Sometimes this can let your Windows boot to the desktop normally. Just have a try. If this won’t help, try other ways.

Method 2: Remove Recently Added Hardware

On the Windows error recovery screen, you know a recent hardware change may be the reason behind the system error . The hardware change may generate Windows instability problems, making your laptop like HP, Dell, Toshiba, etc. fail to reboot.

In this case, we strongly recommend removing recently added hardware.

The following are the instructions:

Step 1: Turn off your laptop, remove the battery and unplug the power cord.

Step 2: Disconnect all the newly added peripherals including a printer, webcam, zip drive, scanner, network cable, and other devices. Leave only the keyboard, monitor cable and mouse attached.

Step 3: Press and hold the power button for 5 seconds and release it.

Step 4: Put the battery back to the laptop and reconnect the power cord.

Step 5: Turn on the laptop and see if Windows error recovery still appears. If yes, go to the next solution to troubleshoot.

Method 3: Boot into Last Known Good Configuration

In Windows 7, there is a feature called Last Known Good Configuration , also known as LKGC. You can boot your PC to this mode if you are having trouble starting the system normally. Last Known Good Configure can load a previous configuration in Windows (including drivers, registry data, etc.) that was working properly.

Step 1: Restart your computer.

Step 2: Repeatedly press the F8 key until you see the Advanced Boot Options window.

Step 3: Select Last Known Good Configuration (advanced) and press Enter .

After the process finishes, your PC will boot to the desktop properly. However, if Windows fails to start twice in a row, you need to move to the next solution.

Method 4: Perform Startup Repair

When experiencing Windows error recovery during the startup of Windows 7, one solution given by the black screen is to perform Startup Repair (also known as Automatic Repair in older versions of Windows). It can scan your system and attempt to fix damaged or missing system files.

In the error recovery screen, sometimes you may have two options and one of them is Launch Startup Repair (recommended) , as shown in the following figure.

Just use the arrow keys to highlight this option and press Enter on your keyboard to run Startup Repair. But if you cannot see this option (just like the first picture), how can you do this job? An installation disc is helpful.

Step 1: Go to download an ISO file of Windows 7 online and then create an installation disc with a USB drive or DVD.

How to Create Bootable USB from ISO Win10/11 for Clean Install

How can you create bootable USB from ISO in Windows 10/11 for a clean install? This post will show you the Windows 10 USB tool for ISO to USB.

Step 2: Insert this disc and restart your computer. Note that you should change the BIOS settings so that the disc is the first boot order.

Step 3: Choose your language, keyboard, and time settings, click Next .

Step 4: In the pop-up window, click Repair your computer .

Step 5: Choose your system to repair.

Step 6: You will get the following interface. Click Startup Repair to automatically fix problems that are stopping Windows from starting.

Windows 7 System Recovery Options

Then, the repair process starts. This may take 15 to 45 minutes to complete, so wait patiently. Also, it may require the system to restart.

If you get the error message saying “ Startup Repair cannot repair this computer automatically ”, you need to go to the next method to fix the Windows error recovery issue.

Method 5: Run System Restore to Fix Windows Error Recovery Safe Mode

If there is a restore point created by you on the computer, you can use it to take your PC back to the settings that previously worked.

When getting the Windows error recovery issue, you can directly choose Safe Mode , Safe Mode with Networking or Safe Mode with Command Prompt from the computer screen if you see these options. If you cannot see it, go to Safe Mode by following these steps.

Step 1: Reboot your computer.

Step 2: Press F8 to enter the Advanced Boot Options window.

Step 3: Select Safe Mode with Command Prompt by using the arrow keys.

Step 4: After the Command Prompt opens, type rstrui and press Enter to open the System Restore window.

Step 5: Choose a restore point from the list and click Next .

Step 6: Click Finish and the restore process will start. After that, the Windows error recovery issue should be fixed.

Method 6: Rebuild BCD

Missing or corruption of BCD files can cause Windows error recovery Windows failed to start. To get rid of the error screen, you can use bootrec.exe to rebuild BCD in Command Prompt (CMD).

You can go to Safe Mode to open Command Prompt or use an installation disc to enter the CMD window. These two ways are described in the above contents. Then, in CMD, type these commands and press Enter after each command.

bootrec.exe /fixmbr

bootrec.exe /fixboot

bootrec.exe /rebuildbcd

Method 7: Run CHKDSK

If the file system gets corrupted, the Windows 7 error recovery issue may appear. So, you should perform a disk check using CHKDSK to fix file system errors and solve your problem/

Also, open Command Prompt, type chkdsk C: /f /x /r and press Enter . After the process is finished, restart your computer and see if Windows error recovery is disappeared.

Method 8: Reinstall Windows 7

If all of these solutions above fail to fix Windows error recovery and your Windows still fails to start, what should you do? The last resort is reinstalling the operating system.

Back up Files

How can you back up files when Windows fails to boot? MiniTool ShadowMaker, a piece of professional PC backup software , is designed to back up your files via imaging and sync.

It allows you to create a bootable USB drive, boot the PC and perform the backup operation in WinPE when Windows cannot boot. Just get MiniTool ShadowMaker from the download button.

MiniTool ShadowMaker Trial Click to Download 100% Clean & Safe

Step 1: On a normal PC, run MiniTool ShadowMaker and go to the Tools tab.

Step 2: Click Media Builder and follow the on-screen to finish the bootable drive creation.

Step 3: Insert the drive to your PC with Windows error recovery, reboot the PC from this drive and enter the MiniTool Recovery Environment.

Related articles:

  • How to Build Boot CD/DVD Discs and Boot Flash Drive with Bootable Media Builder?
  • How to Boot from Burned MiniTool Bootable CD/DVD Discs or USB Flash Drive?

Step 4: Launch MiniTool ShadowMaker and go to the Backup or Sync tab.

Step 5: Choose files on the desktop as the backup source and select a destination.

Step 6: Click Back up Now or Sync Now to execute the backup task.

back up files with MiniTool ShadowMaker

PC is not booting but you want to back up files without booting to save them? This post will show you how to back up data from a computer that won’t boot.

Clean Install

After finishing the backup, now you can follow the guide to perform a clean install of Windows 7 to fix Windows error recovery.

Step 1: Boot your computer from the installation disc that you have prepared.

Step 2: After choosing the language, time and keyboard, click Install now to start the system reinstallation.

install now Windows 7

Step 3: Accept the license terms and choose Custom (advanced) .

Custom install a new copy of Windows

Step 4: Decide where to install Windows and then the setup tool will start installing Windows.

“Does Windows error recovery screen appear when booting up Windows 7? Here are all the possible solutions to this problem. Just share them to let more persons know.” Click to Tweet

Suggestion: Back up Windows Operating System

Now, you should have resolved the Windows error recovery issue that happens in Windows 7 PCs. To restore your PC to a normal state instead of spending much time fixing the problem when it appears next, creating a system image is recommendable.

To do this work, MiniTool ShadowMaker can be also helpful. It can be used to back up Windows operating system, files & folders, disks and partitions in Windows 7/8/10. By default, system backup is selected.

Step 1: Launch MiniTool ShadowMaker.

Step 2: Go to the Backup page, system-related partitions are selected and you can go to Destination to choose a destination.

Step 3: Execute this backup task by clicking Back up Now .

MiniTool ShadowMaker backs up Windows 7

Bottom Line

Are you bothered by Windows error recovery while you start up your Windows 7? Now, try these solutions mentioned above and you can easily get out of the trouble. Also, a suggestion is introduced.

Besides, if you have any methods to fix the Windows 7 error recovery issue, you can tell us by leaving a comment below or contacting [email protected] . Also, any questions during using MiniTool Software are also appreciated.

Windows Error Recovery FAQ

  • Choose Start Windows Normally
  • Remove recently added hardware
  • Boot into Last Known Good Configuration
  • Run Startup Repair
  • Rebuild BCD
  • Reinstall Windows
  • Perform a system restore
  • Delete the problematic file
  • Disable Automatic Startup Repair
  • Restore Windows Registry
  • Check device partition and osdevice partition
  • Reset this PC

About The Author

Vera

Position: Columnist

How-To Geek

How to fix "there was a problem resetting your pc" on windows 10 and windows 11.

You have multiple ways to fix this problem.

Quick Links

Why can't i factory reset my pc, ways to resolve a "there was a problem resetting this pc" error, key takeaways.

The most likely fix for a "There was a problem resetting this PC" error is to run Command Prompt as administrator, enter the command "dism /online /cleanup-image /restorehealth", and reboot your PC. Then try a factory reset again.

Can't reset your Windows PC as the "There Was a Problem Resetting This PC" error keeps cropping up? Worry not; there are ways to resolve this problem, so you can bring your system to the factory settings. We'll show you multiple ways to get around this issue.

The most common reason you get the "problem resetting your PC" error is that your Windows image is corrupt. This corruption happens for various reasons, including viruses and malicious apps .

Other reasons for the error are that your Windows Recovery Environment is faulty, the changes you've made to your PC are incorrect, or your system's core files are unusable.

Related: Everything You Need to Know About "Reset This PC" in Windows 10 and Windows 11

Since this error can occur for several different reasons, you'll likely have to follow a few troubleshooting tips before you can fix your issue. We'll start with the fix for the most common reason of this issue, so you can get your problem sorted out as soon as possible.

Fix Windows Image With DISM

When you get the above error, Microsoft recommends that you fix your local Windows image file. This will resolve the issue with various core system features, including the option that resets your PC .

You can fix a corrupt Windows image using the DISM (Deployment Image Servicing and Management) command, which you can run from a Command Prompt window.

To start, open your PC's "Start" menu, find "Command Prompt" , and select "Run as Administrator."

Choose

In the "User Account Control" prompt, choose "Yes."

On the Command Prompt window, type the following command and press Enter:

dism /online /cleanup-image /restorehealth

Run the DISM command.

Wait for the command to fix your Windows image. When that's done, reboot your PC and retry resetting your PC.

Use Windows Startup Repair

Another way to possibly fix your "There Was a Problem Resetting Your PC" error is by using Windows' Startup Repair tool . This tool helps resolve many issues with Windows' startup, some of which may be causing your reset process to fail.

To do that on Windows 11, head into Settings > System > Recovery. Then, next to "Advanced Startup," click "Restart Now." Then, in the open prompt, choose "Restart Now."

Select

In Windows 10, navigate to Settings > Update & Security > Recovery. Here, in the "Advanced Startup" section, click "Restart Now."

Choose

In the open menu, navigate to Troubleshoot > Advanced Options and click "Startup Repair."

Select "Startup Repair."

Follow the on-screen instructions to repair your system. When that's done, you're ready to reset your PC.

Restart Windows Recovery Environment (Win RE)

One item that can cause a "There Was a Problem Resetting Your PC" error is your Windows Recovery Environment. This service may be experiencing an issue, causing your reset process to fail.

In this case, stop and restart the service to possibly fix your issue.

To do that, open the "Start" menu, find "Command Prompt", and select "Run as Administrator." In the "User Account Control" prompt, choose "Yes."

In Command Prompt, type the following command and press Enter. This command stops Windows RE.

reagentc /disable

Turn off Windows RE.

Start Windows RE by issuing the following command:

reagentc /enable

Try resetting your PC now.

Use System Restore

One reason you get an error while resetting your PC is that the recent changes made to your PC are incorrect. You can fix that by rolling back your changes using Windows' System Restore tool . This tool restores your system to a restore point created in the past, undoing your changes.

To use it, open the "Start" menu, find "Recovery," and select it. Then, choose "Open System Restore."

Select

In System Restore, select "Next." Choose the most recent restore point on the list and click "Next."

Select a restore point and choose

Begin restoring your PC by selecting "Finish."

Click

When you've restored your PC, start the reset process.

Fresh Install Windows 10 or Windows 11

If all else fails to fix your "There Was a Problem Resetting Your PC" error, do a clean install of Windows 10 or Windows 11 operating system on your computer. Not only will this reset your PC, but it'll also wipe off all your data including your apps, settings, and other files. You can then start customizing your system from scratch.

We've written guides on how to install Windows 11 and Windows 10 , so check those out to learn how to perform the procedure. Once that's done, you'll have a clean slate to work with.

Windows Error Recovery. Windows failed to start: Fix for Windows Vista, 7, 8, 8.1

Get the fix to “ Error: Windows failed to start ” boot error for Windows Vista, Windows 7, Windows 8 and Windows 8.1  operating systems.

About the “ Windows failed to start ” error

The following information on this error has been compiled by NeoSmart Technologies, based on the information gathered and reported by our global network of engineers, developers, and technicians or partner organizations.

Description and Symptoms

The error messages, alerts, warnings, and symptoms below are tied to this error.

Symptom 1: Error: Windows failed to start error screen on startup

The “Windows failed to start” screen appears on Windows 8 and Windows 8.1 systems only and it’s identified by a specific error code.

These errors can also happen on Windows Vista and Windows 7 systems as well.

Causes of this Error

The most common causes of this error are:

Cause 1: BCD is missing or corrupt

One of the most common causes of this error is the BCD that became missing or corrupt. That could happen because of disk write errors, power outages, boot sector viruses, or errors made while configuring the BCD manually.

Cause 2: File system integrity compromised

For the same reasons, the file system itself may become corrupt or damaged. That happens even more often if one turns off a PC while it is in the middle of writing crucial data to the boot sector.

Cause 3: System files are damaged

The system files may also become corrupt or damaged for the same reasons.

Fixing “Windows failed to start” on Windows

Windows Setup CD/DVD Required! Some of the solutions below require the use of the Microsoft Windows setup CD or DVD. If your PC did not come with a Windows installation disc or if you no longer have your Windows setup media, you can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many problems, and can also be used to solve this problem with the directions below.

Fix #1: Use Easy Recovery Essentials

Easy Recovery Essentials is guaranteed to fix the “Windows Error Recovery. Windows failed to start” error automatically using its built-in Automated Repair option. EasyRE is currently available for Windows XP , Vista , 7 , 8 , Windows 10 , and Windows 11 and can be downloaded and created on any PC.

  • Download Easy Recovery Essentials . Make sure to note your Windows version (XP, Vista, 7, 8, 10, or Windows 11) before you download EasyRE. This guide can help you identify what version of Windows you have installed.
  • Burn the image. Follow these instructions on how to burn the bootable ISO image  very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive .
  • Boot up your PC from the Easy Recovery Essentials CD or USB you created.

EasyRE Home

Choose “Automated Repair” in Easy Recovery Essentials

EasyRE displays a list of found Windows operating systems

Choose the drive associated with the Windows installation you’re trying to repair.

EasyRE: Automated Repair

Easy Recovery Essentials searches for errors and makes corrections to the selected Windows installation.

  • Once the process is complete, EasyRE will report its findings. Click on the Restart button to reboot your PC and test the changes.

EasyRE: Automated Repair

You can download Easy Recovery Essentials from here .

Fix #2: Boot into Last Known Good Configuration

Here are the steps to boot into the Last Known Good Configuration option:

  • Restart your computer
  • Press F8 repeatedly until you see the list of boot options
  • Choose Last Known Good Configuration (Advanced)
  • Press Enter and wait to boot

Last known good configuration screen

Last known good configuration screen

Fix #3: Run System Restore from Windows installation disc

This method will only work if you have the installation disc and System Restore enabled on your Windows copy. Here are the steps to access System Restore:

  • Insert the Windows install disc
  • Press a key when “Press any key to boot from CD or DVD” message appears on your screen
  • Click on Repair your computer after selecting a language, time and keyboard method
  • Select the drive where you installed Windows (usually C:\ ) and click Next
  • Select System Restore from the System Recovery Options window
  • Follow the System Restore wizard instructions to select a restore point
  • Restore your PC by clicking Finish

Fix #4: Run chkdsk

Alternatively, you can run the chkdsk process. Here are the steps:

  • Insert your CD; restart your computer
  • Boot into the CD by pressing any key when the “Press any key to boot from CD” message appears on your computer
  • Press R to open the Recovery Console at the Options menu
  • Type in your Administrator password
  • In Command Prompt, type the following command: chkdsk C: /f /x /r

Press Enter

  • After chkdsk process is completed, restart your computer

chkdsk utility results screen

chkdsk utility results screen

Fix #5: Rebuild the master boot sector

Using Bootrec.exe you can rebuild the master boot sector (BCD). This is a tool built in the Windows Recovery Environment (Windows RE) that can repair boot configuration data.

BCD stands for Boot Configuration Data, contains boot configurations options and controls how your Windows is started.

  • Insert your Windows install disc
  • Press any key at the “Press any key to boot from CD or DVD” message
  • Choose Repair your computer after you select the language, time and keyboard method
  • Select your Windows installation drive (usually C:\ ) and click Next
  • Select Command Prompt at System Recovery Options
  • Write the following command and press Enter afterwards: bootrec /FixMbr bootrec /FixBoot bootrec /ScanOs bootrec /rebuildBcd

bootrec utility results screen

bootrec utility results screen

More Information

Linked entries.

  • Advanced Options menu in Windows

Support Links

  • The NeoSmart Support Forums , member-to-member technical support and troubleshooting.
  • Get a discounted price on replacement setup and installation discs: Windows Vista , Windows 7 , Windows 8 .

Applicable Systems

This Windows-related knowledgebase article applies to the following operating systems:

  • Windows Vista (all editions)
  • Windows 7 (all editions)
  • Windows 8 (all editions)
  • Windows 8.1 (all editions)

Propose an edit

Related Articles

Fatal: int18: boot failure fix, bootguard 2tb data protection, setup was unable to create a new system partition: fix for windows, irql not less or equal – fix for windows 10, 11, xp, vista, 7, 8, kernel security check error – fix for windows xp, vista, 7, 8, 8.1, 10, 0x00000109 – fix for windows vista, 7, 8, 10, new fix boot errors with our recovery disk.

Download Easy Recovery Essentials

  • Using Windows 10? Download recovery disk for Windows 10 (free)
  • Using Windows 8? Download recovery disk for Windows 8
  • Using Windows 7? Download recovery disk for Windows 7
  • Using Windows Vista? Download recovery disk for Windows Vista

Fix guides for common boot errors

Startup blue screens ✓

Disk corruption ✓

Registry failure ✓

Virus infections ✓

Bootloader issues ✓

And more! ✓

  • Startup Repair Infinite Loop
  • Fix the MBR
  • Your PC needs to be repaired
  • Restore To Factory Settings

how to fix a windows error recovery

Resolving Blue Screen errors in Windows

Blue Screen errors (also sometimes called black screen errors or STOP code errors) can occur if a serious problem causes Windows to shut down or restart unexpectedly. You might see a message that says, "Windows has been shut down to prevent damage to your computer" or a similar message.

Screenshot of Blue Screen error

These errors can be caused by both hardware and software issues. If you added new hardware to your PC before the Blue Screen error, shut down your PC, remove the hardware, and try restarting. If you're having trouble restarting, you can start your PC in safe mode. For more info, see  Start your PC in safe mode in Windows .

You can also try getting the latest updates with Windows Update, help from other sources, or restoring Windows to an earlier point in time.

If none of those steps help to resolve your Blue Screen error, please try the Blue Screen Troubleshooter in the Get Help app:

In Windows, open Get Help .

In the Get Help app, type Troubleshoot BSOD error .

Follow the guided walkthrough in the Get Help app.

Note:  If you're not on a Windows device, you can run the Blue Screen Troubleshooter on your browser by going to Contact Microsoft Support  and typing Troubleshoot BSOD error .  Then follow the guided walkthrough under "Recommended Help".

You can find more information about your specific STOP error code at  Bug Check Code Reference.

Facebook

Need more help?

Want more options.

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

how to fix a windows error recovery

Microsoft 365 subscription benefits

how to fix a windows error recovery

Microsoft 365 training

how to fix a windows error recovery

Microsoft security

how to fix a windows error recovery

Accessibility center

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.

how to fix a windows error recovery

Ask the Microsoft Community

how to fix a windows error recovery

Microsoft Tech Community

how to fix a windows error recovery

Windows Insiders

Microsoft 365 Insiders

Find solutions to common problems or get help from a support agent.

how to fix a windows error recovery

Online support

Was this information helpful?

Thank you for your feedback.

Recover deleted & lost data from any disasters in Windows.

Windows 11/10/8.1/8/7

how to fix a windows error recovery

  • MyRecover >
  • Windows Data Recovery >

Ultimate Guide to Fix Inaccessible Boot Device Error in Windows 10

This article provides a thorough guide for resolving the inaccessible boot device error in Windows 10. Through detailed, step-by-step instructions across multiple methods including system restore, driver updates, disk checks, and the use of recovery tools like MyRecover.

Lori

By Lori / Updated on February 21, 2024

Encountering an "inaccessible boot device" error on your Windows 10 PC can feel like hitting a wall. This error, often accompanied by the dreaded blue screen of death, signals that your system is having trouble reading from the disk that contains its operating system.

But fear not! With this comprehensive guide, we'll walk you through several methods to fix this issue, ensuring your PC gets back to running smoothly. Whether you're a complete beginner or have some technical know-how, these steps are designed to be accessible and effective for everyone.

Understanding the Inaccessible Boot Device Error in Windows 10

What Causes This Error?

The "inaccessible boot device" error can be triggered by various issues, including but not limited to, system updates gone wrong, driver conflicts, hardware failures, or even corrupt system files. At its heart, it means Windows has lost its path to read the system's boot information, akin to losing the map while navigating a complex network.

Method 1: Perform a System Restore

Why It Works:

A System Restore can act as a time capsule, allowing you to revert your system's state to a previous point where everything was functioning correctly. It's particularly useful if the error appeared after a recent software installation or system update.

Step-by-Step Guide:

Access Advanced Startup Options : Restart your PC. As it begins to boot, continuously press the F11 key (this can vary depending on your PC manufacturer) to enter the Advanced Startup Options menu. If F11 doesn't work, you can alternatively start your PC from a Windows 10 installation media and select 'Repair your computer' to get to the same menu.

Navigate to System Restore : In the Advanced Startup Options menu, click on "Troubleshoot," then "Advanced options," and finally select "System Restore."

Select a Restore Point : The System Restore wizard will prompt you to choose a restore point. Select a date before you started experiencing the error. If you're unsure, pick the most recent point listed.

Initiate the Restore : Follow the on-screen instructions to initiate the restoration process. This might take some time, but once it's done, your computer will restart, hopefully error-free.

Method 2: Update Your Drivers

The Logic Behind It:

Drivers facilitate communication between your system's hardware and software. Outdated, corrupt, or incompatible drivers can lead to various issues, including boot errors. Keeping them updated is crucial for system stability.

How to Do It:

Boot into Safe Mode : Restart your computer and repeatedly press F8 (or Shift + F8) during boot to access the Advanced Boot Options menu. From there, select "Safe Mode with Networking." This starts Windows in a basic state, using a limited set of files and drivers.

Access Device Manager : Right-click on the Start menu and select "Device Manager." Here, you'll see a list of all the hardware components and peripherals connected to your PC.

Identify and Update Drivers : Look for any devices with a yellow exclamation mark next to them, indicating a problem. Right-click on the problematic device and choose "Update driver." Then, select "Search automatically for updated driver software" and follow the prompts. Repeat this for any other devices with warnings.

Restart Your PC : After updating the necessary drivers, restart your PC normally to see if the issue has been resolved.

Method 3: Check for Disk Errors

Why This Method:

Disk errors can prevent Windows from accessing the boot information correctly, leading to the inaccessible boot device error. Running a check disk operation can find and fix these errors on your hard drive.

Steps to Follow:

Open Command Prompt as Administrator : Press Windows Key + X and select "Command Prompt (Admin)" from the menu. If you see PowerShell instead of Command Prompt, you can use that as well.

Run Check Disk : In the command prompt, type chkdsk /f /r and press Enter. This command will scan your disk for errors and attempt to fix them. The /f parameter tells chkdsk to fix any errors it finds, while /r locates bad sectors and recovers readable information.

Restart Your Computer : You'll likely see a message saying that chkdsk cannot run because the volume is in use by another process. It will ask if you want to schedule this volume to be checked the next time the system restarts. Type Y for yes, and then restart your computer to let chkdsk run its course.

Introduction to MyRecover

In the event that these methods do not resolve the inaccessible boot device error, turning to a comprehensive recovery tool like MyRecover can be your next best step. MyRecover is designed to tackle a wide range of system issues, including boot errors, system crashes, and data loss scenarios.

Features and Recovery Steps:

Download and Install MyRecover : Visit the official MyRecover website to download and install the software on a working PC.

Create a Recovery Drive : Launch MyRecover and follow the instructions to create a bootable USB drive. This will serve as your recovery media.

Boot from the Recovery Drive : Insert the USB drive into the affected PC and boot from it. You may need to enter the BIOS setup to change the boot order, prioritizing the USB drive.

Perform a Recovery : Once MyRecover loads, follow the on-screen instructions to perform system recovery. This can include automated repairs, system restores, or data recovery operations.

Restart Your PC : After completing the recovery process, remove the USB drive and restart your PC. With any luck, the inaccessible boot device error will be resolved, and your system will boot normally.

The "inaccessible boot device" error in Windows 10 can stem from a variety of issues, but with patience and the right approach, it's often fixable. Whether through system restores, driver updates, disk checks, or using specialized recovery tools like MyRecover, there are multiple pathways to resolve this problem. Remember to back up your data regularly to mitigate the impact of such errors in the future.

1. How often should I update my drivers to avoid errors?

It's a good practice to check for driver updates every few months or whenever you encounter system issues.

2. Can disk errors cause permanent damage to my files?

Yes, if left unchecked, disk errors can lead to data loss. Regularly running disk checks can help prevent this.

3. Is it safe to perform a system restore?

Absolutely. System Restore is a non-destructive process and doesn't affect your personal files, though it's always a good idea to back up important data.

4. How do I know if MyRecover can help with my specific issue?

MyRecover is designed to address a wide range of system and disk issues. If you're unsure, its customer support can guide you on whether it's suitable for your situation.

5. What should I do if none of the methods fix the inaccessible boot device error?

If you've tried all methods and the issue persists, it might be a hardware problem. Consulting a professional or contacting your PC manufacturer for support is recommended.

Lori

Free Get MyRecover Now

how to fix a windows error recovery

  • Canada - (English)
  • Canada - (Français)
  • Latinoamérica - (Español)
  • United States - (English)

ASIA PACIFIC

  • Australia - (English)
  • India - (English)
  • New Zealand (English)
  • Philippines - (English)
  • Singapore - (English)
  • Traditional Chinese - (繁體中文)
  • 대한민국 - (English)
  • Windows 10 PC Apps & Games
  • Windows Leaks & Rumor
  • Privacy Policy
  • Select Theme: Light Dim Dark

Logo

Windows February 2024 Update causes taskbar to disappear

how to fix a windows error recovery

Windows 11 KB5034765 won’t install, taskbar issues, and explorer.exe crashes

how to fix a windows error recovery

Windows 11 24H2 upgrades Bluetooth accessories’ discoverability

how to fix a windows error recovery

Windows 11’s modern right-click menus are getting better in Build 26058

Windows Copilot turns off Show Desktop

Microsoft turns off “Show desktop” in Windows 11 by default to…

Microsoft brings Windows 11 Spotlight to Windows 10

Microsoft brings Windows 11 Spotlight to Windows 10’s desktop

how to fix a windows error recovery

Windows 10 KB5034441 is still broken with 0x80070643 error

Windows 10 KB5034763 update

Windows 10 KB5034763 released with new features

Windows 11 Upgrade popup in Windows 10

Microsoft again reminds Windows 10 users it’s time to get Windows…

  • Windows 11 24H2
  • Windows Copilot
  • Get Windows 11 23H2
  • Get Moment 4
  • Windows 11 issues
  • Windows 10 issues
  • Windows 10 ISO
  • Windows 11 ISO
  • Windows 10 PC

how to fix a windows error recovery

Windows 10 KB5034441 is so broken that Microsoft has been working “on a resolution” for more than four weeks and still doesn’t have a proper solution. KB5034441 is a mandatory update for people with a Recovery partition, but it won’t install on most hardware due to 0x80070643 error.

KB5034441 is a security update for Windows Recovery Environment (WinRE), enabled on systems with a recovery partition. This is an important release as it fixes a security issue that allows attackers to bypass Bitlocker’s encryption of other partitions by exploiting WinRe’s vulnerability.

It doesn’t matter whether your Windows installation is using BitLocker. As long as you have a recovery partition, KB5034441 will try to download and install automatically, but our tests revealed the security update would not install with an error message titled “0x80070643 – ERROR_INSTALL_FAILURE”.

This issue has been widely reported by users in our forums, including in the comments section of the previous article on Windows Update .

Windows 10 KB5034441 update fails with 0x80070643

As you can see in the above screenshot, Windows updates are blocked with the “0x80070643 – ERROR_INSTALL_FAILURE” message, which means some users are unable to install the February 2024 update ( KB5034763 ).

So what causes the patch titled “2024-01 Security Update for Windows 10 Version 22H2 for x64-based Systems (KB5034441)” to repeatedly fail with a vague error message 0x80070643 – ERROR_INSTALL_FAILURE” and block other updates?

Microsoft officials told me the issue is strictly limited to PCs with low storage space on the recovery partition.

In a support document , Microsoft noted that the Windows Recovery security update needs at least 250 MB of free space in the recovery partition to install successfully:

  • For Windows 10 v2004 or Windows Server 2022: You should have 50 MB of free space if the partition is smaller than 500 MB.
  • For other versions, you should have more than 300 MB of free space when the partition is 500 MB or larger.
  • When the partition is more than 1 GB, it must have at least 1 GB of free space.

Although Microsoft suggests increasing the partition size slightly, increasing this to 2 GB has proven more effective in our tests.

How to fix Windows 10 KB5034441 update issues by easily resizing the partition

  • Open Command Prompt as an administrator .
  • Type reagentc /info to find out if your computer has a special recovery area ( WinRE ) and where it is.
  • Type reagentc /disable to turn off this recovery area temporarily so you can adjust settings safely.
  • In Command Prompt, enter diskpart followed by list disk to see all your storage drives.
  • You must choose your Windows OS drive with sel disk and the drive number listed in the terminal.
  • After you run sel disk <OS disk index>, type list part to look at the partition’s sections. This lets you check the partition under the OS disk and find the OS partition.
  • Run the command: shrink desired=2000 minimum=2000

Windows 11 error 0x80070643 can be fixed by resizing disk

  • Note from the editor: If you are still confused, let me simplify it. As shown in the above example screenshot, first, we need to select partition 3 as the OS partition index. This step won’t erase your primary OS partition, part of a different partition created on the same volume as C: Disk. Once you have selected partition 3, follow the remaining instructions to complete the process for the OS primary partition. Next, select partition 4 as your WinRE partition. These partition numbers are specific to my system and can be different for your device.
  • After running the shrink command and selecting the WinRE partition with sel part <WinRE partition index>, you can now remove it safely with delete partition override .
  • Check if your drive uses GPT (newer) or MBR (older) format. Look for an asterisk (*) next to “Gpt” after typing list disk .
  • For GPT drives, set up a new section with create partition primary id=de94bba4-06d1-4d40-a16a-bfd50179d6ac  and then gpt attributes=0x8000000000000001 .
  • For MBR, use create partition primary id=27
  • Get it ready by formatting: format quick fs=ntfs label=”Windows RE tools”
  • Review your setup with list vol .
  • Exit the storage organizer with exit .
  • Reactivate your recovery setup with reagentc /enable .
  • Confirm the new recovery location with reagentc /info .

We have noticed that the above process could fail for some people at the 17th step when they try to reactivate their Recovery Parititon with the “Windows RE image was not found” error. You can try to fix issues with WinRE activation by trying these steps:

  • First, grab the Windows 10 ISO file , and mount the ISO file to a drive. Head to Command Prompt (admin), and run the command: reagentc /disable
  • You can use md c:\WinMount command to create a new directory, which lets you mount your Windows installation file. To mount the image, run the following command: dism /mount-wim /wimfile:E:\Sources\install.wim /index:1 /mountdir:C:\WinMount /readonly
  • After mounting the image, we need to copy the recovery files from the fresh ISO image to your system with the following command. xcopy C:\WinMount\Windows\System32\Recovery\*.* C:\Windows\System32\Recovery /h

Once done, run the following command to set the recovery image path:

Finally, you can return to the 17th step and run the command again: reagentc enable

Microsoft has also published a PowerShell script to fix the problem automatically, and you can grab it from our Discord server , but make sure you install the “Safe OS Dynamic Update” using the Microsoft Update Catalog before running the PowerShell script.

About The Author

Mayank Parmar

Mayank Parmar is Windows Latest's owner, Editor-in-Chief and entrepreneur. Mayank has been in tech journalism for over seven years and has written on various topics, but he is mostly known for his well-researched work on Microsoft's Windows. His articles and research works have been referred to by CNN, Business Insiders, Forbes, Fortune, CBS Interactive, Microsoft and many others over the years.

RELATED ARTICLES MORE FROM AUTHOR

Microsoft again reminds windows 10 users it’s time to get windows 11 with renewed pop-ups.

how to fix a windows error recovery

Microsoft confirms Windows 10 File system error (2147219196) crashing apps

how to fix a windows error recovery

Microsoft is investigating Windows Update breaking apps on Windows Server 2022

how to fix a windows error recovery

Windows Server 2022 KB5034129 crashes Edge, Chrome and Firefox with white screen

Windows 11 February 2024 Update

Microsoft turns off “Show desktop” in Windows 11 by default to make space for Copilot

Microsoft brings Windows 11 Spotlight to Windows 10

Featured in

  • Terms Of Use

how to fix a windows error recovery

Top Contributors in Windows 10: Ramesh Srinivasan  -  neilpzz  -  Horace Wiggins  -  franco d'esaro  -  _AW_   ✅

February 14, 2024

Top Contributors in Windows 10:

Ramesh Srinivasan  -  neilpzz  -  Horace Wiggins  -  franco d'esaro  -  _AW_   ✅

  • Search the community and support articles
  • Search Community member

Ask a new question

When will Microsoft fix the 2024-01 Security Update for Windows 10 Version 22H2 for x64-based Systems (KB5034441) (0x80070643)

how to fix a windows error recovery

When will Microsoft fix the 2024-01 Security Update for Windows 10 Version 22H2 for x64-based Systems (KB5034441) (0x80070643) Asking someone and giving instructions on how to change the Windows Recovery Environment (WinRE) partition size is just bad advice. I wonder how many bricked their OS trying to follow their instructions. Are they even working on fixing it? Or dont care? How many of you still see this issue it's February and still not fixed yet.
  • Subscribe to RSS feed

Report abuse

Replies (20) .

* Please try a lower page number.

* Please enter only numbers.

The error code 0x80070643 you're encountering with the 2024-01 Security Update for Windows 10 Version 22H2 (KB5034441) is a common issue that typically indicates a problem with the .NET Framework installation on your system or issues with the update installation process itself. Microsoft usually addresses these kinds of issues through subsequent updates or provides specific fixes or workarounds. Regarding the specific concern about when Microsoft will fix this issue, it's important to regularly check for updates to your system and Microsoft's official communications. Microsoft often releases updates to address known issues, and any fixes specific to KB5034441 or related errors would likely be included in these updates or mentioned in their support documentation. Steps to Troubleshoot Error 0x80070643: 1. Run Windows Update Troubleshooter: - Go to Settings > Update & Security > Troubleshoot> Additional troubleshooters. - Select Windows Update and run the troubleshooter. 2. Check .NET Framework Installation: - Ensure your .NET Framework installations are up to date or repair them if necessary. 3. Manual Update Installation: - Try manually downloading and installing the update from the Microsoft Update Catalog website. 4. SFC and DISM Scan: - Run System File Checker (SFC) and Deployment Image Servicing and Management (DISM) scans to repair Windows images and system files. You can do this by opening Command Prompt as an administrator and running the `sfc /scannow` command, followed by DISM commands `DISM /Online /Cleanup-Image /RestoreHealth`. Microsoft's Response and Updates: Microsoft is generally responsive to widespread issues affecting system updates and security patches. However, the specific timelines for fixes can vary. For the most current information regarding this issue, including any official acknowledgments, workarounds, or fixes, it's best to: - Look for any updates or advisories related to KB5034441. - **Check the Microsoft Update Catalog**: For any new updates that might address this issue. - **Follow Windows Update**: Regularly check for new updates on your system that might include fixes. Since this issue is widespread and impacting many users, Microsoft is likely working on a resolution. However, the exact timing for such fixes can be hard to predict. Keeping your system up to date and monitoring official Microsoft support channels are the best ways to stay informed about resolutions to issues like these.

Was this reply helpful? Yes No

Sorry this didn't help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

Thanks for your feedback.

how to fix a windows error recovery

2 people found this reply helpful

Well, I am fine with making the Recovery Partition larger but Microsoft forgot to add the step to add the Unallocated 250MB to it. So now I have Unallocated 250MB just sitting there doing nothing.

how to fix a windows error recovery

As you can see here. It is deleted. But the next step on KB5028997: Instructions to manually resize your partition to install the WinRE update - Microsoft Support 5. Create a new recovery partition. Completely ignore step 4 Shrink the OS partition and prepare the disk for a new recovery partition and goes right to create partition primary id=de94bba4-06d1-4d40-a16a-bfd50179d6ac Which just creates the 500MB recovery back. So the update wont bother to update because it's still the same small 500MB so I pretty much did nothing useful besides pull 252MB to be unused.

1 person found this reply helpful

Yeah looks like that's the best option.

Feb updates come out tomorrow; will it be fixed with those?

I have just applied the February updates, after "unhiding" KB5034441, which caused so much grief last month. All of this month's updates applied perfectly, and KB5034441 failed in exactly the same was as before.

I shall therefore hide it for anther month, and try again in March!

3 people found this reply helpful

Question Info

  • Windows update, recovery, & backup
  • Norsk Bokmål
  • Ελληνικά
  • Русский
  • עברית
  • العربية
  • ไทย
  • 한국어
  • 中文(简体)
  • 中文(繁體)
  • 日本語

Born's Tech and Windows World

  • About this Blog
  • Advertise on this blog
  • Privacy statement

Windows 10: Update KB5034441 fails again with error 0x80070643 in February 2024

Windows

WinRE update KB5034441 as a problem

how to fix a windows error recovery

Since January 9, 2024, Microsoft has been trying to eliminate this vulnerability with an update and has provided some information on this under the support article KB5034441 . Unfortunately, the update is rolled out automatically via Windows Update, regardless of whether Bitlocker is activated on a machine or not. An existing Win RE partition is sufficient – although the installation even failed if the partition was missing.

Microsoft had already indicated in advance that the installation of the update requires 250 MB of free disk space in the recovery partition in order to be installed successfully. If the recovery partition does not have enough free space, the update fails during installation with the error 0x80070643 – ERROR_INSTALL_FAILURE.

I had reported on the matter in several posts on the blog (see links at the end of the article). Microsoft updated the post The January 2024 Windows RE update might fail to install . A blog reader pointed out in this German comment that Microsoft is now indicating that the Win RE update is not required if the system does not have a WinRE recovery partition.

Error 0x80070643 with the February 2024 patch

However, Microsoft is apparently rolling out the KB5034441 update again via Windows Update. Hans T. wrote in this German comment :

Allerdings rollt Microsoft das Update KB5034441 scheinbar erneut über Windows Update aus. Hans T. hat sich in diesem Kommentar gemeldet und schreibt:

The Microsoft junk KB5034441 was offered to me on Windows Update again. Installation end with the error message: Download error 0x80070643.

There are other German readers like here who confirm the "download" error in the blog. Another reader wrote here that the update was installed at the second attempt. This effect was already confirmed to me in this German comment in January 2024. Wolfgang also made a similar observation in this comment. Other readers confirmed this in the comment thread. I had already written that Nico had reported this on Facebook in a closed group and commented on it

I thought the February update would fix the problem with the partitions being too small? … Funnily enough, the whole update ran completely on an identical computer and on another it threw the said error. Edition Windows 10 Pro Version 22H2 Installed on 27.07.2023 Operating system build 19045.4046 Performance Windows Feature Experience Pack 1000.19053.1000.0

Update KB5034441: Win RE Error 0x80070643

Tecci has made another post on Facebook in a closed group and reported the error on several clients.

I have a jackpot that the error code 0x80070643 comes up on 80% of the Win10 computers at a customer. I have tried the Microsoft solution on the end devices, but without success. I also ran the update repair mode, also without success. Do you still have a solution approach?

Even increasing the partition to 2 GB did not help. Two points stuck in my mind in this context: If the partition is large enough, make sure that it is also activated. And I shared an observation from a reader on Facebook in this German comment . He noticed that the Win RE on his partition was "too old" and the update failed during installation. After he had copied an updated Win RE to the partition, the update went through during installation.

I just saw in a search that Windows Latest also addressed the problem in this post a few hours ago. However, the solution given there (adjust partition) may not work in persistent cases.

Hide the Update

In the blog post Microsoft is working on a fix for the installation error 0x80070643 (WinRE update KB5034441) , I gave the tip that users in a private environment for whom the update wants to install again and again can try to stop the update installation. To do this, the update must be hidden. In unmanaged environments under Windows 10 / 11 version, however, the update can be blocked using the Microsoft Show or Hide Updates tool. In managed corporate environments (WSUS, Intune, etc.), administrators can suspend the distribution of the update.

Similar articles: Microsoft Security Update Summary (January 9, 2024) Microsoft Security Update Summary (February 13, 2024) Patchday: Windows 10 Updates (February 13, 2024) Patchday: Windows 11/Server 2022 Updates (February 13, 2024)

Windows WinRE update (for Bitlocker Bypassing vulnerability CVE-2024-20666) fails with installation error 0x80070643 (Jan. 2024, KB5034441) Microsoft's PowerShell script against installation error 0x80070643 for KB5034441 (Jan. 2024) Windows 10: Be aware of WinRE WinRE patch to fix Bitlocker bypass vulnerability CVE-2022-41099 Windows 10: Update on WinRE patch (fix for Bitlocker bypass vulnerability CVE-2022-41099) Windows 10/11: Microsoft releases script for WinRE BitLocker bypass fix

One Response to Windows 10: Update KB5034441 fails again with error 0x80070643 in February 2024

thanks a lot of information

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

I have read and accepted the Privacy Policy *

  • Search for:

how to fix a windows error recovery

Social networks

how to fix a windows error recovery

Recent Comments

  • EP on Windows update error due to missing Edge browser
  • StanG on Microsoft Teams 2.0: Fix for missing Outlook add-in
  • guenni on Broadcom ends perpetual licenses for VMware products – End of the free ESXi server?
  • Thore on Broadcom ends perpetual licenses for VMware products – End of the free ESXi server?
  • reyhan on Microsoft Office Updates (February 13, 2024)
  • Entries feed
  • Comments feed
  • WordPress.org

IMAGES

  1. 5 Methods to Fix Windows Error Recovery in Windows 10

    how to fix a windows error recovery

  2. Fix: Windows 10 Blue Screen Recovery Error 0x0000185

    how to fix a windows error recovery

  3. How to Fix Windows Error 0xc0000605 (Recovery

    how to fix a windows error recovery

  4. 4 Quick ways to Fix Windows Error Recovery

    how to fix a windows error recovery

  5. Solved: Windows Error Recovery in Windows 10

    how to fix a windows error recovery

  6. how to fix a windows error recovery

    how to fix a windows error recovery

VIDEO

  1. How to remove windows error recovery on startup

  2. Fixing Windows 10 0xc000000e boot bluescreen with Easy Recovery Essentials

  3. windows error recovery windows 7 failed to start || Recovery error windows || black screen windows 7

  4. Windows Error Recovery Fixed!

  5. How To Fix Windows Recovery Error 💻 #youtubeshorts #shortsvideo #shorts

  6. Windows Error Recovery Problem Fix 100% Easy Steps

COMMENTS

  1. Windows Error Recovery: How to Fix It When Windows Failed to Start

    Remove the battery. On a laptop system with an easy-to-remove battery, unplug all power cables and remove the battery. Then, with the battery out of the system, plug in the AC power cable and connect it to the laptop. Start up the computer. If it starts successfully, the problem is the laptop battery.

  2. How to Fix System Restore on Windows When It Fails to Recover

    1. Use System Restore From Command Prompt If using System Restore from the System Properties window is giving you difficulties, try using Command Prompt instead. Doing this will restore your computer to the most recent System Restore point. To do this, press Win+S and type "cmd" in the search box.

  3. Use the System File Checker tool to repair missing or corrupted system

    At the command prompt, type the following command, and then press ENTER: sfc /scannow The sfc /scannow command will scan all protected system files, and replace corrupted files with a cached copy that is located in a compressed folder at %WinDir% \System32\dllcache. The %WinDir% placeholder represents the Windows operating system folder.

  4. Recovery options in Windows

    Accessibility center Learn about the recovery options in Windows. Find out how to reset your PC, go back to a previous version of Windows, or use media to reinstall Windows.

  5. What are the system recovery options in Windows?

    The System Recovery Options menu contains several tools, such as Startup Repair, that can help you recover Windows from a serious error. This set of tools is on your computer's hard disk and on the Windows installation disc. Note: You can also create a system repair disc that contains the System Recovery Options menu.

  6. Windows 10 Recovery isn't working please help me!

    6) An alternative is to run Factory Recovery from it's hotkey at boot; find yours by googling the "PC make/model + Run Factory Recovery." But keep in mind the Factory install is greatly inferior to a Clean Install, a Windows-only Reset or a Refresh without the crippling factory bloatware.

  7. Fix Windows Error Recovery Loop on Windows 7 & 10 [Laptop, PC]

    1. Remove recently added hardware Turn off your laptop and remove the AC adapter and its battery. Disconnect the newly added device. You may have to reopen the laptop to access whatever hardware you had installed (if it was an internal addition).

  8. 5 Methods to Fix Windows Error Recovery in Windows 10

    One way to fix Windows Error Recovery in windows 10 is to use the Windows 10 restore system. Follow the instructions below to restore Windows 10: Go to the Start-up advanced options menu of Windows 10 (Step 1 in the first method: use the start-up repair of Windows 10). Click on System Restore.

  9. How to repair Windows 10 (and 11) in 4 steps

    Step 1: Using DISM and SFC for system repair Step 2: Try a recent restore point or image backup Step 3: In-place upgrade to current Windows 10 version Step 4: Completely reinstall Windows 10...

  10. How to repair and restore Windows 10

    Here's how: 1. Navigate to the Windows 10 Advanced Startup Options menu. On many laptops, hitting F11 as soon as you power on will get you to the Windows 10 Advanced Startup Options. Booting off ...

  11. 4 Quick ways to Fix Windows Error Recovery

    4 Quick ways to Fix Windows Error Recovery Windows Report 73.8K subscribers Subscribe Subscribed 10 6.7K views 3 years ago ⚙️Try Fortect to fix and optimize your PC like a Pro:...

  12. Solved: Windows Error Recovery in Windows 10

    How to fix Windows Error Recovery on Windows 10? This is a common problem that can affect the work of users. Find the cause of this problem and the solution in this article. You can also learn how to protect your system with powerful software. by Yuka Updated on November 1, 2022 Table of Contents What Causes Windows Error Recovery on Windows 10?

  13. If You Get Windows Error Recovery Screen in Windows 7, Fix It!

    Method 1: Choose Start Windows Normally When seeing the Windows 7 error recovery interface, the first thing you can do is to use the arrow keys to choose Start Windows Normally.

  14. How to Fix the Windows 11 Error Recovery Screen on Boot

    Key notes The Windows 11 Error Recovery screen is encountered when you turn on the computer and prevents the OS from booting normally. To fix it, remove malfunctioning hardware, run Startup repair, rebuild the Boot Configuration Data, run SFC and DISM, amongst other methods listed here.

  15. How to Fix "There Was a Problem Resetting Your PC" on Windows 10 and

    The most likely fix for a "There was a problem resetting this PC" error is to run Command Prompt as administrator, enter the command "dism /online /cleanup-image /restorehealth", and reboot your PC. Then try a factory reset again. Can't reset your Windows PC as the "There Was a Problem Resetting This PC" error keeps cropping up?

  16. Windows Error Recovery. Windows failed to start: Fix for Windows Vista

    Fix #1: Use Easy Recovery Essentials Easy Recovery Essentials is guaranteed to fix the "Windows Error Recovery. Windows failed to start" error automatically using its built-in Automated Repair option. EasyRE is currently available for Windows XP, Vista, 7, 8, Windows 10, and Windows 11 and can be downloaded and created on any PC.

  17. How To Fix Windows 10 Blue Screen Recovery

    How To Fix Windows 10 Blue Screen Recovery Media Creation Utility: https://www.microsoft.com/en-us/software-download/windows10Tutorial of creating bootable u...

  18. How to fix Windows 10 Recovery Error

    How to fix Windows 10 Recovery Error | Blue Screen Automatic Restart Loop FixThis video is going to guide you through the steps to fix How to fix Windows 10 ...

  19. Resolving Blue Screen errors in Windows

    For more info, see Start your PC in safe mode in Windows. You can also try getting the latest updates with Windows Update, help from other sources, or restoring Windows to an earlier point in time. If none of those steps help to resolve your Blue Screen error, please try the Blue Screen Troubleshooter in the Get Help app:

  20. Ultimate Guide to Fix Inaccessible Boot Device Error in Windows 10

    Boot into Safe Mode: Restart your computer and repeatedly press F8 (or Shift + F8) during boot to access the Advanced Boot Options menu. From there, select "Safe Mode with Networking." This starts Windows in a basic state, using a limited set of files and drivers. Access Device Manager: Right-click on the Start menu and select "Device Manager."

  21. Windows 10 KB5034441 is still broken with 0x80070643 error

    How to fix Windows 10 KB5034441 update issues by easily resizing the partition. Open Command Prompt as an administrator. Type reagentc /info to find out if your computer has a special recovery ...

  22. Windows Error Recovery, Launch Startup Repair (Recommended), Start

    how to solve problem, Windows Error Recovery, Launch Startup Repair (Recommended), Start windows normally | Acer Aspirehttps://www.youtube.com/channel/UCreF8...

  23. How to Fix Insert Your Windows Installation or Recovery Media

    Steps to Run SFC: Press Win + X on your keyboard. From the menu, select "Command Prompt (Admin)" or "PowerShell (Admin)." If prompted, click "Yes" to allow the program to make changes to your device. In the Command Prompt or PowerShell window, type the following command: sfc /scannow.

  24. When will Microsoft fix the 2024-01 Security Update for Windows 10

    1. Run Windows Update Troubleshooter: - Go to Settings > Update & Security > Troubleshoot> Additional troubleshooters. - Select Windows Update and run the troubleshooter. 2. Check .NET Framework Installation: - Ensure your .NET Framework installations are up to date or repair them if necessary. 3.

  25. How To Fix Windows Error Recovery

    If you don't know how to How To Fix Windows Error Recovery, this video is for you.

  26. Windows 10: Update KB5034441 fails again with error ...

    Windows 10, Windows 11 and Windows Server 2022 are potentially affected. Since January 9, 2024, Microsoft has been trying to eliminate this vulnerability with an update and has provided some information on this under the support article KB5034441 .