Avantix Learning

How to Loop a PowerPoint Slide Show to Repeat Automatically

Loop a PowerPoint slide show to replay automatically represented by two circular arrows on top of a board room.

Set up a PowerPoint Presentation That Loops or Repeats Continuously

by Avantix Learning Team | Updated November 12, 2021

Applies to: Microsoft ®  PowerPoint ®  2013, 2016, 2019 and 365 (Windows)

You can set up a PowerPoint slide show to loop or repeat automatically. A looping presentation can be used at events, trade shows or even in a reception area in an office. The easiest way to set up a slide show to loop or replay continuously is to apply automatic transitions and then configure Slide Show settings.

Recommended article: 5 PowerPoint Keyboard Shortcuts to Run a Slide Show

Do you want to learn more about PowerPoint? Check out our virtual classroom or in-person PowerPoint courses >

Screenshots in this article are from PowerPoint 365 but are similar in older versions of PowerPoint.

Step 1: Apply transitions to automatically advance slides during a slide show

Transitions occur between slides when you run a slide show.

To apply transitions to automatically advance slides during a slide show:

  • In Normal View or Slide Sorter View, display or select a slide.
  • Click the Transitions tab in the Ribbon.
  • Select a transition in the Transitions gallery (such as Fade).
  • Click Effect Options and choose the desired option. Effect Options change depending on the transition you selected.
  • In the Timing group, click the arrows beside Duration to set the timing you want (in seconds) for the transition. You may also type a duration.
  • In the Timing group, under Advance Slides, deselect or uncheck On mouse click and beside After, select or click the up and down arrows to set the timing to transition to the next slide. You may also type a duration.
  • In the Timing group, click Apply to All.

In the Transitions tab in PowerPoint, you can select the type of transition (such as Fade) as well as timing options:

Transitions tab in the Ribbon in PowerPoint to apply transitions and timings.

Step 2: Set up a presentation to loop during a slide show

To set up a PowerPoint presentation to loop during a slide show:

  • Click the Slide Show tab in the Ribbon and then click Set Up Slide Show. A dialog box appears.
  • Under Show type, if you select Presented by a speaker (full screen), the speaker or those watching the slide show will have control over when they advance slides. This is the default setting for slide shows. If you select Browsed by an individual (window), those watching the slide show do NOT have control over when slides advance. If you select Browsed at kiosk (full screen), those watching the slide show do NOT have control over when slides advance and the presentation automatically loops until those watching press Escape (Esc).
  • Under Show options, select Loop continuously until 'Esc'. You will be able to select this option if you selected one of the first two options under Show type.

Below is the Set Up Show dialog box with Presented by speaker selected and looping enabled:

PowerPoint Slide Show dialog box to set up looping in a presentation.

If you want to set specific timings for slides to advance or to add narration, check out the article How to Run a PowerPoint Slide Show Automatically (Set Up a Self-Running Presentation) . If you have audio or video in the presentation, you'll need to set the media to play automatically (on the Playback tab in the Ribbon) and animations will also need to be set to run automatically.

Subscribe to get more articles like this one

Did you find this article helpful? If you would like to receive new articles, JOIN our email list.

More resources

How to Embed a YouTube Video in PowerPoint

How to Hide and Unhide Slides in PowerPoint (with Shortcuts)

How to Insert Video in PowerPoint (from a File on Your PC or a Shared Drive)

PowerPoint Keyboard Shortcuts to Play and Control Video During a Slide Show

How to Add Animation in PowerPoint (Animate Images, Text and Other Objects)

Related courses

Microsoft PowerPoint: Intermediate / Advanced

Microsoft PowerPoint: Design for Non-Designers

Microsoft PowerPoint: Animations Bootcamp

Microsoft Excel: Intermediate / Advanced

VIEW MORE COURSES >

Our instructor-led courses are delivered in virtual classroom format or at our downtown Toronto location at 18 King Street East, Suite 1400, Toronto, Ontario, Canada (some in-person classroom courses may also be delivered at an alternate downtown Toronto location). Contact us at [email protected] if you'd like to arrange custom instructor-led virtual classroom or onsite training on a date that's convenient for you.

Copyright 2024 Avantix ® Learning

You may also like

How to Insert or Type E with an Accent Mark in PowerPoint (È, É, Ê, Ë, è, é, ê, or ë)

How to Insert or Type E with an Accent Mark in PowerPoint (È, É, Ê, Ë, è, é, ê, or ë)

You can insert or type e with an accent mark in PowerPoint using built-in tools or keyboard shortcuts (including Alt code shortcuts). The letter e can be inserted with an accent in both upper or lower case in text boxes or placeholders on slides, the slide master or layouts. The following are common accents in upper or lower case – È, É, Ê, Ë, è, é, ê, or ë.

How to Fade a Picture or Part of a Picture in PowerPoint (Using a Gradient)

How to Fade a Picture or Part of a Picture in PowerPoint (Using a Gradient)

You can fade a picture in PowerPoint by drawing a rectangle shape on top of the picture and then filling the rectangle with a gradient from opaque to transparent. This technique is often used to fade an image into the background of a slide. Since the rectangle is placed on top of the image and then text may be placed on top of the rectangle, you may need to reorder the objects.

How to Lock an Image, Shape or Other Object in PowerPoint

How to Lock an Image, Shape or Other Object in PowerPoint

You can now lock an image, shape or other object in PowerPoint. Objects can be locked in Normal View or Slide Master View. Only PowerPoint 365 users can lock objects to prevent moving and resizing. This is helpful if you want to select and move other objects on the slide or prevent others from moving or resizing an object. You can lock items using the context menu or the Selection Pane.

Microsoft, the Microsoft logo, Microsoft Office and related Microsoft applications and logos are registered trademarks of Microsoft Corporation in Canada, US and other countries. All other trademarks are the property of the registered owners.

Avantix Learning |18 King Street East, Suite 1400, Toronto, Ontario, Canada M5C 1C4 | Contact us at [email protected]

How to Loop a PowerPoint Slide Show to Repeat Automatically

Our Courses

Avantix Learning courses are offered online in virtual classroom format or as in-person classroom training. Our hands-on, instructor-led courses are available both as public scheduled courses or on demand as a custom training solution.

All Avantix Learning courses include a comprehensive course manual including tips, tricks and shortcuts as well as sample and exercise files.

VIEW COURSES  >

Contact us at  [email protected]  for more information about any of our courses or to arrange custom training.

Privacy Overview

Pin it on pinterest.

  • Print Friendly

site logo

How to Use Autoplay in a PowerPoint Presentation

So you can snooze off more easier

Author avatar

When you must give a presentation at work, Microsoft PowerPoint is the standard tool most people use. However, without some creativity, PowerPoint presentations can end up dull. Learning how to autoplay PowerPoint slides can add some spice to your presentations.

In this article, you’ll learn how to autoplay content in PowerPoint slides. You can automatically play an embedded video when a slide appears or autoplay animations. Finally, you can create a self-running presentation that moves through the next slide using specific timing that you’ve set up.

Note : The following tips will work on PowerPoint, whether running on a Windows or a Mac computer.

How to Use Autoplay in a PowerPoint Presentation image 1

How to Create a Self-Running PowerPoint Presentation

Why create a self-running PowerPoint presentation? You may not want to get distracted by clicking to move your presentation to the next slide. Or you’d like to set up your presentation on a kiosk at a convention. Some presentations that can run themselves may not even need a speaker.

Set Up the Slide Show

By default, PowerPoint presentations are configured to run as “Presented by a speaker”, where you have to click through each slide to trigger transitions throughout the presentation.

To set up Autoplay, first configure the presentation to autoplay how you would like.

  • Select Slide Show tab from the menu, then select Set Up Slide Show from the ribbon.

How to Use Autoplay in a PowerPoint Presentation image 2

  • Use the options on the pop-up window to configure how your presentation will behave during autoplay.

How to Use Autoplay in a PowerPoint Presentation image 3

Here’s how each option works:

  • Presented by a speaker : The speaker must click through each slide using the mouse click. However, automatic slide timing is still an option if you select it on the right.
  • Browsed by an individual : The viewer will need to press Play to start the presentation, but after that, it’ll play on its own.
  • Browsed at a kiosk : This option will continue to loop through the presentation until you press the Esc key on the keyboard. This will automatically enable the Loop Continuously option at the bottom of the window.

Rehearse and Set Slide Times

The next step is to set up the slide timing and rehearse your presentation to ensure the time spent automatically on each slide is appropriate.

Using this rehearsal option is also a great way to practice your presentation and ensure that the overall runtime is within your limitations.

To do this:

  • Select Slide Show from the menu and choose Rehearse Timings from the ribbon.

How to Use Autoplay in a PowerPoint Presentation image 4

  • This will start the “Recording” session. In this mode, you’ll need to speak normally using the script you will use during your presentation. When done speaking on a specific slide, select the “Next” arrow to continue to the next slide.

Note : Use the “Pause” button to pause the time for the current slide if you need to collect your thoughts or take a break for any reason. This small window will also show you the overall time for your entire presentation.

How to Use Autoplay in a PowerPoint Presentation image 5

  • Continue to do this through all of the slides. Finally, press the “x” at the upper right corner to finish recording on the last slide. You’ll see a pop-up message asking if you’d like to save your new slide timings.

How to Use Autoplay in a PowerPoint Presentation image 6

Once you’ve saved these changes, your PowerPoint presentation is ready to use. If you’ve kept the default Presented by a speaker setting and enabled the Using timings, if present select under “Advance Slides,” you can start your presentation manually and then let slides advance automatically as you speak.

Record Slide Show (Fully Automated)

If you want to create a fully self-running presentation for a kiosk or send people to run themselves, select the correct option in the “Set Up Show” window described above.

Then, record your presentation by selecting Slide Show from the menu and selecting Record in the ribbon. Next, select From Beginning in the drop-down menu to start recording your presentation in full screen from the first slide.

How to Use Autoplay in a PowerPoint Presentation image 7

You can skip this step if you don’t want to record your voice narrating the slideshow. Just make sure you’ve enabled the Show without narration check box in the Set Up Show window.

How to Embed and Autoplay a Video

Another thing you can automate in your PowerPoint presentations is triggering an embedded video file when you click on the slide where you’ve placed it.

In the editing view, right click the video you want to automate and select the down arrow to the right of the Start button.

How to Use Autoplay in a PowerPoint Presentation image 8

Select Automatically from the dropdown menu.

How to Use Autoplay in a PowerPoint Presentation image 9

Save the PowerPoint presentation. Now, it’ll start playing automatically when you advance to the slide with your embedded video while in presenter view.

Should You Use a Self-Running PowerPoint Presentation?

The option to have your PowerPoint slide show advance automatically can be handy. However, it isn’t always the right approach. For example, a complete, recorded presentation is great if you’re emailing your presentation or offering a download. But a self-running presentation could backfire if you’re drawn into a side conversation or have other things you want to say on the fly. As a result, you may find yourself fumbling to pause your presentation.

If you want more control over your presentation flow, sticking with a manually run presentation might be best for your situation.

' src=

Ryan has been writing how-to and other technology-based articles online since 2007. He has a BSc degree in Electrical Engineering and he's worked 13 years in automation engineering, 5 years in IT, and now is an Apps Engineer. Read Ryan's Full Bio

Read More Posts:

make powerpoint presentation run automatically

How to Create an Auto-Playing PowerPoint Presentation

Table of contents.

make powerpoint presentation run automatically

Creating a self-running PowerPoint, as Microsoft calls it, can be a great addition to your company’s booth at conventions or industry-wide conferences. By featuring photos, infographics and key points in a continuous loop, PowerPoint becomes an effective communication tool to inform others about your company, its goals, and your products or services.

Auto-playing presentations are also great for employee training, meetings where the speaker is absent, and reaching remote clients or customers. Microsoft provides easy steps to turn your PowerPoint into an autoplay presentation.

Setting up the presentation

There are several options for creating a PowerPoint presentation automatically. All of these can be accessed under the Slide Show tab.

Slide Show > Set Up Slide Show

There are three options under this menu:

  • Presented by a speaker : This first option requires the viewer to click through each slide. This is the default setting that most PowerPoint presentations are already in and is the mode with which you’re likely most familiar.
  • Browsed by an individual : This option will create a slideshow where the viewer cannot control when slides advance. This is an autoplay feature, but the viewer will still have to hit Play to get it started.
  • Browsed at a kiosk . Once selected, this option will loop the slide show until a viewer presses the escape button.

If you don’t want your viewers to have access to when the slideshow starts and stops, select the third option. The Loop Continuously option underneath will be automatically selected.

Experts estimate that there are about 30 million PowerPoint presentations created every day !

Recording slide timing

Before you begin recording your presentation, it’s important to set the slide time using the rehearsal toolbar. This will give you an idea of how long each slide will run before advancing to the next one. It will also allow you to practice your presentation and understand how long the runtime will be. Like setting up the slide show, this window can be accessed via the Slide Show tab.

Slide Show > Rehearse Timings

The recording window allows users to advance to the next slide, pause the presentation, view the current slide’s time, restart the recording for a slide and view the total runtime of the presentation.

After recording the last slide, PowerPoint will ask whether you want to keep the slide timings or not.

Recording your presentation

Once your slide timings are set, you can record your slide show.

Navigate to Slide Show > Record Slide Show to begin your recording. Click End Show and save your file once you are done recording. After saving, your presentation is ready to be sent to clients, customers or played at your convention or conference booth.

Here are some quick tips to check for before recording your presentation:

  • Before beginning your recording, make sure you adjust the Play Narrations and the Use Timings checkboxes.
  • If you want all narration and slide transitions included, both boxes should be checked.
  • To create a silent sequence of slides, make sure the Play Narrations button is deselected.

What is PowerPoint autoplay?

Autoplay allows you to keep a PowerPoint presentation running. In typical PowerPoint presentations, presenters click from slide to slide manually using a clicker or spacebar on a keyboard.

Luckily, PowerPoint autoplay allows users to set up their slides, so they automatically change. That way, they can focus on their presentation without interruptions. There are options to have slides timed to music or voiceovers and make each slide the same length.

You can use autoplay in any number of situations where a continuous, unattended loop is called for, such as photos at an event, displaying information at a trade show booth or using the changing slides as a visual cue while rehearsing a timed presentation.

Why is PowerPoint autoplay beneficial?

Autoplay is great for several uses, from delivering announcements throughout a company’s office or a school, to giving speeches and presentations at conventions or work. Presenters can rehearse the timings of the slides and then present without worry. Here are some of the reasons why someone may use PowerPoint’s autoplay features:

  • Rehearsal . Practicing your presentation involves timing, and autoplay can be a great tool for learning how to fill time or keeping it short. For example, many teachers and professors require presentations to fill a certain amount of time for class projects. While rehearsing timings, users can determine how much time to spend on each slide. This keeps presenters on track during their presentations, even when they want to speed up due to nerves or pressure.
  • Convention booths and exhibits. Trade shows , conventions and networking events are great for companies and salespeople who want to showcase a variety of products and services. People who walk by can look at the presentation and not have to ask employees for information. In addition, a good PowerPoint presentation with eye-catching visuals and information can attract potential customers and clients, which could turn into sales.
  • Music videos and tribute presentations. Whether it is a presentation of family vacation photos to the soundtrack of the summer or a lyric video to your favorite song, autoplay allows users to create appealing presentations and videos. These could even be downloaded into MP4 files to share with family and friends.
  • Replay and loop at events or other occasions. This is great for offices that have a slideshow of information for their clients or patients. They can show a variety of pictures, information about services, and even the company’s latest news and contact information. Because of this, employees can set up the presentation, walk away and know that their announcements are being made public without even saying a word.

thumbnail

Building Better Businesses

Insights on business strategy and culture, right to your inbox. Part of the business.com network.

make powerpoint presentation run automatically

PowerPoint: How to Launch a Presentation Automatically as a Slide Show

PowerPoint show; PowerPoint presentation slide shows

What is a PowerPoint Show?

By default, PowerPoint saves your slide presentation as a PowerPoint presentation file with the .pptx file extension which, when double-clicked, launches PowerPoint. The presentation opens in whatever view was open when you saved it, such as the Normal view or Slide Sorter view. If you want your slide show to immediately launch in the Slide Show view, however, you need to save your file as a PowerPoint Show. In this article, find out how to create a PowerPoint slide show file and learn 2 bonus tips .

To Save a PowerPoint Presentation as a PowerPoint Show:

  • Choose the  File  tab.
  • Select  Save As .
  • Pick the  Save as type  as  PowerPoint Show .
  • Type a name for your slide show in the  File name  text box (you can use the same name and location as your .pptx/presentation file) and click  Save . Your PowerPoint slide show file is saved with a .ppsx extension.

Now, the next time you or anyone else opens your presentation from outside of PowerPoint, your slide show immediately launches in Slide Show view. When you navigate past the last slide, the file automatically closes. To open the file for editing, launch PowerPoint first and open it as you would a standard presentation. If you have access to the original presentation, you may prefer to open the .pptx file to edit and save it again as a slide show file. Most importantly, make sure to manage your files, so you are working with the most current version.

PowerPoint Presentation Tips

BONUS TIP:  When I save my presentations as a PowerPoint Show, I save the file to my desktop for easy access during speaking and training engagements. If needed, I can also quickly close and re-open the file without launching PowerPoint and without showing everyone all of my slides. Working with a PowerPoint Show also saves a number of steps because it automatically launches with a simple double-click of the mouse.

To move to a specific slide in a presentation while in the slide show view (as either a presentation or show format), just type the slide number and press  [Enter] . To make these moves easier, print out a handout of your presentation, which includes slide numbers of each slide for quick navigation. Or, create a simple manual cheat sheet to reference when you want to jump to different slides.

BONUS TIP #2: In addition to saving PowerPoint shows to my desktop, I also add a generic slide to the beginning. For instance, a slide with your organization logo or simply a black slide. Although this may not apply to your presentations, I often navigate in and out of my slide show as I am also demonstrating software features and facilitating discussions within my training classes and conference sessions. With a generic or simple slide at the start, I can launch the slide show with a neutral, blank slide and then use the keyboard shortcut to type the slide number and press [Enter]  to move to a specific slide within the presentation.

Were these PowerPoint tips helpful? Grab your handout of other quick and easy PowerPoint shortcuts and discover more PowerPoint techniques  here .

© Dawn Bjork, MCT, MOSM, CSP®, The Software Pro® Microsoft Certified Trainer, Productivity Speaker, Certified Speaking Professional

' src=

Related Posts

Rehearse with Coach for Better PowerPoint Presentations July 25, 2023

Improve Your Presentations: Sites for Paid & Free Images May 21, 2022

PowerPoint Hide Slide: How to Customize Your Presentations July 6, 2022

Join Our Tips Newsletter

Receive 477+ shortcuts & more!

make powerpoint presentation run automatically

How to Make a PowerPoint Presentation Play Automatically

Young man has   presentation with graph on lcd screen

PowerPoint remains one of the most versatile and widely used presentation software tools. Thanks to an increasingly diverse suite of tools and capabilities, PowerPoint serves as a sturdy anchor for individuals across a variety of industries during speeches, presentations and just about anything in between.

Advertisement

One of the most helpful tools found inside PowerPoint is the option to play a presentation automatically, which is particularly useful if you are creating a presentation that will run without your oversight or participation, such as at a freestanding kiosk or exhibition. A PowerPoint automatic slideshow can be configured quickly in only a few quick steps.

Video of the Day

Preparing Your PowerPoint Autoplay Functions

After you finish creating the slides for your PowerPoint presentation, you are ready to configure the autoplay functions. First, confirm that all your slides have the desired content and are in the appropriate order. Although you can make changes at a later point, it doesn't hurt to take a moment at this stage of the process to review your presentation as a whole. After you confirm the arrangement and content, open the "Slide Show" tab and press the "Set Up Slide Show" button. You have the option to configure your presentation for three automatic play modes: "Presented by a speaker (full screen)," "Browsed by an individual (window)" and "Browsed at a Kiosk (full screen)." Your selection determines how users can interact with the slides at any given time.

PowerPoint Slideshow Loop Options

If you select "Presented by a speaker," the slideshow runs automatically behind you as you speak to your audience. When you opt for "Browsed by an individual" as your automatic play mode, individuals can manually navigate through your presentation, which then loops and returns to the first slide upon completion of the deck. If "Browsed at a Kiosk" mode is selected, the slides progress automatically on a loop until an individual exits from the presentation entirely by pressing the "Escape" key. When "Browsed at a Kiosk" mode is selected, you configure the amount of time that elapses between slides. For example, if your presentation includes slides that contain a large amount of content, you may want to set a long delay between slide transitions to give the viewers time to review all the content on each slide.

Other Opportunities to Explore

PowerPoint autoplay has proven itself to be an integral component of the software and for good reason. In addition to the customization features mentioned here, you can also automate a variety of additional tasks, including PowerPoint animations during slide transitions and the length of time that these animations occur as one slide transitions to another. Whatever your specific needs may be, the chances are good that PowerPoint's unique set of resources can help you get the job done.

  • Microsoft Office: Create a Self-Running Presentation
  • Business News Daily: How to Create an Auto-Playing PowerPoint Presentation

Report an Issue

Screenshot loading...

How-To Geek

How to loop a powerpoint presentation.

If you're showing off a lot of photos at a special event, set your presentation to progress at a continuous, automatic loop. Here's how.

Quick Links

Set up your slideshow to be looped, apply automatic slide transitions.

Slideshows are sometimes used to display images at events, such as weddings or trade shows. Whatever the occasion might be, you’ll want to loop your PowerPoint presentation so your guests aren’t staring at a blank screen. Here’s how it’s done.

First, open your PowerPoint presentation in which you would like to loop. Once open, navigate to the “Set Up” group of the “Slide Show” tab and then select the “Set Up Slide Show” button.

Set up slide show

The “Set Up Show” window will appear. In the “Show options” group, check the box next to “Loop Continuously until Esc.” Once selected, click “OK” in the bottom-right corner of the window.

Loop Continuously until Esc

Now, when you play your slideshow, it will end only when you press the “Esc” key instead of when you've finished the last slide.

Related: How to Make YouTube Videos Loop Continuously

One caveat: With the way we currently have it set up, the slideshow will proceed only when someone clicks the mouse button. That’s fine if there will be a speaker present at all times. Otherwise, you’ll need to set up automatic slide transitions.

Head back to the “Set Up Show” window by selecting “Set Up Slide Show” in the “Set Up” group of the “Slide Show” tab.

There are a couple of options you need to select, but one important note is that you must first select “Using Timings, If Present” under the “Advance Slides” group.

Use timings if present

The next option we select will lock a few things in place (which is why you need to select “Using Timings, If Present” first).

Under the “Show Type” group, select “Browsed at a Kiosk (Full Screen)." The “Loop Continuously until Esc” option will be enabled automatically if you haven’t already turned it on, and the option you’ve selected under “Advance Slides” will remain unchanged.

Select “OK” when ready to proceed.

Browsed at a kiosk

Without the “Browsed at a Kiosk” option enabled, the automatic slide progressions would be disabled if someone were to press the Back key. With it enabled, the Forward and Back keys are locked, allowing the slideshow to automatically progress unattended without fear of someone breaking it.

Now it’s time to set the timings of the slides. Head over to the “Transitions” tab. In the “Timing” group, check the box next to “After” and set the timing at which you’d like each slide to progress. Note that it doesn’t matter if the box next to “On Mouse Click” is checked or not---it won’t work.

After that, select the “Apply to All” option in the same group.

Set slide transition time

Now, when you play your slideshow, it will continuously loop without interruption. To exit the slideshow, press the “Esc” button.

Zebra BI logo

How to Make Slides Play Automatically in PowerPoint

A powerpoint slide deck with a play button in the center

Have you ever had to sit through a lengthy presentation and wished that the slides would just move on their own? Automatic slideshows can make presentations more engaging and professional-looking, and they can save you time and effort by letting you focus on your message instead of manually advancing your slides. In this article, we will explore the benefits of automatic slide playback in PowerPoint and show you how to set up and customize your own automatic slideshow.

Table of Contents

Why Automatic Slideshows are Important for Presentations

Automatic slideshows can keep your audience engaged and interested in your presentation by providing a seamless flow of information. When your slides are timed correctly, you can avoid awkward pauses or distractions that come from manually advancing your presentation. With an automatic slideshow, you can also save time by not having to worry about advancing slides or managing your presentation.

In addition, automatic slideshows can also help you to maintain a consistent pace throughout your presentation. This is especially important if you have a lot of information to cover in a limited amount of time. By setting the timing for each slide, you can ensure that you are able to cover all of your key points without rushing or running out of time. Furthermore, automatic slideshows can also be a great tool for accessibility, as they can be set up to include captions or audio descriptions for those who may have difficulty hearing or seeing the presentation.

Understanding the Benefits of Automatic Slide Playback in PowerPoint

Automatic slide playback in PowerPoint can improve your presentation in many ways. With automatic slideshows, you can:

  • Keep your presentation on schedule by timing your slides in advance
  • Provide a more professional look and feel to your presentation
  • Make your presentation more engaging by using animations and transitions
  • Reduce the stress of presenting by taking away the need to constantly manage your slides

Additionally, automatic slide playback can also help you to maintain a consistent pace throughout your presentation. By setting the timing for each slide, you can ensure that you are not spending too much time on one topic and rushing through another. This can help your audience to better understand and retain the information you are presenting.

How to Set Up an Automatic Slide Show in PowerPoint

Setting up an automatic slide show in PowerPoint is easy and can be done in just a few steps:

  • Open your PowerPoint presentation
  • Click on the “Transitions” tab in the ribbon
  • In the “Timing” section, check “After” and enter the number of seconds you want each slide to appear
  • Click “Apply to All Slides”
  • Save your presentation
  • When you’re ready to present, click “Slideshow” and then “From Beginning” to start your automatic slideshow

However, there are a few additional tips and tricks you can use to make your automatic slide show even more effective. Firstly, consider using a consistent theme throughout your presentation to make it look more professional. You can also add animations and transitions between slides to make your presentation more engaging.

Another useful feature in PowerPoint is the ability to add narration to your slides. This can be especially helpful if you’re presenting to a large audience or if you want to provide additional context for your slides. To add narration, simply click on the “Insert” tab in the ribbon, select “Audio,” and then choose “Record Audio.”

Customizing Your Automatic Slide Show Settings in PowerPoint

PowerPoint also provides several settings that you can customize to make your automatic slideshow more interesting and engaging.

  • Choose different animations and transitions for each slide to create a more dynamic presentation
  • Add music and sound effects to your presentation to enhance the viewer’s experience
  • Apply different timings to individual slides for added interest and emphasis

Another way to customize your automatic slideshow is by adding narration to your presentation. This can be especially useful if you are presenting to an audience that may not be familiar with the topic. You can record your own voiceover or use a professional voiceover artist to add a personal touch to your presentation.

In addition, you can also customize the background of your slides to make them more visually appealing. You can choose from a variety of colors, patterns, and images to create a unique look for your presentation. This can help to keep your audience engaged and interested in your content.

Tips for Creating a Seamless Automatic Slide Show in PowerPoint

Creating a seamless and professional-looking automatic slideshow can take a bit of practice. Here are some tips to help you perfect your presentation:

  • Use clear and readable fonts and text sizes
  • Avoid overloading your slides with too much information or graphics
  • Consider using high-quality images or videos to enhance your slides
  • Use animations and transitions sparingly

Another important tip to keep in mind is to ensure that your slide show has a consistent theme or design. This means using the same color scheme, font style, and layout throughout your presentation. Consistency helps to create a cohesive and professional-looking slide show that is easy for your audience to follow. Additionally, it is important to rehearse your slide show beforehand to ensure that the timing and transitions are smooth and seamless. By following these tips, you can create an engaging and effective automatic slide show in PowerPoint.

Troubleshooting Common Issues with Automatic Slide Shows in PowerPoint

Despite the benefits and ease of use, automatic slideshows can sometimes encounter common issues. Here are some solutions to common problems:

  • Slides not advancing: Make sure you have set the timings correctly in the “Transitions” tab
  • Animations or transitions not working: Verify that you have applied them to the correct slide and that they are compatible with your version of PowerPoint
  • Timing is off: Adjust the timings of your slides as needed to ensure a smooth flow

Another common issue with automatic slideshows is the presence of audio or video files that may not play properly. To fix this, ensure that the media files are compatible with your version of PowerPoint and that they are properly linked to the slides. Additionally, check that your computer’s audio and video settings are configured correctly.

Enhancing Your Presentation with Music and Sound Effects in an Automatic Slide Show

Adding music and sound effects to your automatic slideshow can make your presentation more engaging and memorable. To do so, go to the “Insert” tab and choose “Audio,” then select the audio file you want to use. From there, you can adjust the audio settings and timings in the “Audio Tools” tab.

When selecting music or sound effects for your presentation, it’s important to choose pieces that are appropriate for your audience and the topic of your presentation. For example, if you’re giving a presentation on a serious topic, you may want to choose more subdued music or sound effects, while a presentation on a fun topic may benefit from more upbeat and lively music.

It’s also important to consider the volume of your audio. You don’t want it to be too loud or too soft, as this can distract from your presentation or make it difficult for your audience to hear. Test the volume in advance and adjust it accordingly to ensure that it’s just right.

Best Practices for Using Automatic Slide Shows in Business Presentations

When using automatic slideshows for business presentations, consider the following best practices:

  • Create a clear and concise message that is easy to deliver
  • Use relevant and impactful graphics to support your message
  • Keep your presentation short and focused on your key points
  • Practice your presentation before presenting

Another important best practice for using automatic slide shows in business presentations is to ensure that your slides are visually appealing and easy to read. Use a consistent color scheme and font throughout your presentation to maintain a professional look. Additionally, avoid cluttering your slides with too much text or graphics, as this can distract from your message and make it difficult for your audience to follow along. By following these best practices, you can create a successful and engaging business presentation that effectively communicates your message.

Advanced Techniques for Creating Dynamic Automatic Slide Shows in PowerPoint

For more advanced users, consider using multimedia elements such as videos, animations, or interactive tools to create a more dynamic and engaging automatic slideshow. Utilize PowerPoint’s various settings and tools to create an interactive experience for your audience.

Another technique to consider is using custom animations to add movement and visual interest to your slides. You can animate individual elements such as text boxes, images, and shapes to appear, disappear, or move across the slide. This can help to emphasize key points and keep your audience engaged.

Additionally, you can use PowerPoint’s built-in collaboration tools to work with others on your slide show. This can be especially useful for larger projects or when working with a team. You can share your presentation with others, allow them to make edits or comments, and track changes to ensure everyone is on the same page.

Creating Interactive Presentations with Automatic Slideshows

Interactive automatic slideshows can take your presentations to the next level. Consider using tools such as clickable images, hyperlinks, or charts to let your audience engage with your presentation. By incorporating interaction into your automatic slideshow, you can create an engaging and memorable experience for your audience.

How to Time Your Presentation Using an Automatic Slideshow

When timing your presentation using an automatic slideshow, it’s important to consider your audience’s attention span and the amount of information you want to convey. To do this, practice your presentation with different timings to determine the most effective duration and pacing for your message. Aim to deliver your presentation in a way that is engaging, easy to follow, and memorable for your audience.

Sharing Your Automatic Slideshow Across Different Platforms and Devices

To share your automatic slideshow across different platforms and devices, save your presentation as a PowerPoint file or use one of PowerPoint’s sharing options. You can also convert your presentation to a PDF or video format for easy sharing and viewing on a variety of devices.

In-depth Guide to Animations and Transitions in an Automatic Slideshow

For an in-depth guide to using animations and transitions in an automatic slideshow, consult PowerPoint’s Help documentation or online resources. Utilize various types of animations and transitions to create a personalized, engaging experience for your audience.

The Future of Presentations: Automating and Personalizing Your Slideshows

The future of presentations is all about automation and personalization. With advancements in AI and machine learning, we can expect to see more personalized and interactive automatic slideshows in the years to come. These exciting developments will make presentations more engaging, memorable, and effective in conveying messages to your audience.

By humans, for humans - Best rated articles:

Excel report templates: build better reports faster, top 9 power bi dashboard examples, excel waterfall charts: how to create one that doesn't suck, beyond ai - discover our handpicked bi resources.

Explore Zebra BI's expert-selected resources combining technology and insight for practical, in-depth BI strategies.

make powerpoint presentation run automatically

We’ve been experimenting with AI-generated content, and sometimes it gets carried away. Give us a feedback and help us learn and improve! 🤍

Note: This is an experimental AI-generated article. Your help is welcome. Share your feedback with us and help us improve.

make powerpoint presentation run automatically

make powerpoint presentation run automatically

Play a video automatically in a slide show

When you’re delivering your presentation, you may want a video to play automatically as soon as the slide appears onscreen.

Play a video automatically when a slide appears in Slide Show

In Normal view, click the video in your slide.

Click on the Playback tab.

Next to Start , click the down arrow, and select Automatically .

When you are delivering your presentation in Slide Show View or Presenter View, the video will play automatically when you arrive at the slide.

If your slide doesn’t have a video in it yet, you can add one. Go to Add and play a video in a presentation for more information.

Important:  Certain older video file formats may not compress or export properly in Office on a Windows RT PC. Instead, use modern media formats such as H.264 and Advanced Audio Coding (AAC), which PowerPoint 2013 RT supports. Want to know what version of Office you’re using?

Another option: Play in Click Sequence

Beginning with PowerPoint 2016, one more video playback option is available: Play in Click Sequence . With that option set, when you click anywhere on the slide to advance to the next step (or when you press the Spacebar, Right arrow key, or other key that advances to the next step), the video plays.

This is an improvement over PowerPoint 2013 and prior versions where, with the On Click option, you literally have to click the video to make it play because other actions (such as pressing the Spacebar or the Right arrow key) don't cause the video to play.

See Play a video automatically or when clicked for more details about Play in Click Sequence .

Facebook

Need more help?

Want more options.

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

make powerpoint presentation run automatically

Microsoft 365 subscription benefits

make powerpoint presentation run automatically

Microsoft 365 training

make powerpoint presentation run automatically

Microsoft security

make powerpoint presentation run automatically

Accessibility center

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.

make powerpoint presentation run automatically

Ask the Microsoft Community

make powerpoint presentation run automatically

Microsoft Tech Community

make powerpoint presentation run automatically

Windows Insiders

Microsoft 365 Insiders

Was this information helpful?

Thank you for your feedback.

How to loop a PowerPoint slideshow so that it automatically starts over as soon as it ends

  • To loop a PowerPoint slideshow, you'll need to enable looping in the "Set Up Slide Show" menu.
  • Once you set your PowerPoint to loop, it'll start over from the beginning automatically after playing the last slide.
  • Visit Business Insider's Tech Reference library for more stories .

If you've designed a Microsoft PowerPoint presentation that's meant to be viewed repeatedly, such as on a kiosk or in a museum installation, you can adjust the settings in PowerPoint so that your slideshow "loops" instead of ending after one viewing.

Getting a PowerPoint to loop is easy. Read on to find out how, using PowerPoint for both Mac and PC.

Check out the products mentioned in this article:

Microsoft office (from $149.99 at best buy), apple macbook pro (from $1,299.00 at apple), acer chromebook 15 (from $179.99 at walmart), how to loop a powerpoint presentation.

1. Open the Microsoft PowerPoint presentation that you want to loop.

2. With your PowerPoint presentation open, click on the "Slide Show" tab, then click on "Set Up Slide Show." 

3. In the pop-up window that appears, click on the box next to "Loop continuously until 'Esc'" so that a small checkmark appears inside the box. Feel free to adjust any other settings in this menu as well. Click "OK" when you're finished.

4. To test whether your PowerPoint can loop successfully, click on the "From Beginning" or "Play From Start" button in the Slide Show tab. Click through the slideshow until you reach the end. When your PowerPoint reaches its final slide, it should start over from the beginning automatically. When you're confident that looping is enabled, and you're ready to close the slide show, press the Esc key.

make powerpoint presentation run automatically

Related coverage from  Tech Reference :

How to add a border to slides in powerpoint, and give your slideshow a sleek design, how to embed a youtube video into your microsoft powerpoint presentations using a mac or pc, how to convert google slides to a powerpoint presentation in 4 easy steps, how to create a custom powerpoint template to use or share with others, how to copy or duplicate a powerpoint slide and put it anywhere in your slideshow.

Insider Inc. receives a commission when you buy through our links.

Watch: We compared the $1,200 MacBook Air with the $500 Surface Go, and the results were a mess

make powerpoint presentation run automatically

  • Main content

make powerpoint presentation run automatically

Top Contributors in PowerPoint: Steve Rindsberg  -  Jim_ Gordon  -  John Korchok  -  Bob Jones AKA: CyberTaz   ✅

February 13, 2024

Top Contributors in PowerPoint:

Steve Rindsberg  -  Jim_ Gordon  -  John Korchok  -  Bob Jones AKA: CyberTaz   ✅

  • Search the community and support articles
  • Microsoft 365 and Office
  • Search Community member

Ask a new question

Zaeden

PowerPoint-How to enable automatic animation without click.

Report abuse, replies (10) .

  • Independent Advisor

Was this reply helpful? Yes No

Sorry this didn't help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

Thanks for your feedback.

When I set it to start "With Previous" and if it is the first animation in the slide , then it starts automatically .

But in my presentation the one which is supposed to start automatically should start after the first two animations.

John Korchok

  • Volunteer Moderator

1 person found this reply helpful

Question Info

  • Norsk Bokmål
  • Ελληνικά
  • Русский
  • עברית
  • العربية
  • ไทย
  • 한국어
  • 中文(简体)
  • 中文(繁體)
  • 日本語

IMAGES

  1. How To Make Powerpoint Play Automatically?

    make powerpoint presentation run automatically

  2. How to Run a PowerPoint Slide Show Automatically (Set Up a Self-Running

    make powerpoint presentation run automatically

  3. How to Run a PowerPoint Slide Show Automatically (Set Up a Self-Running

    make powerpoint presentation run automatically

  4. How to Run a PowerPoint Slide Show Automatically (Set Up a Self-Running

    make powerpoint presentation run automatically

  5. Set Slideshow To Automatically Advance In PowerPoint, Automatic Slide Scrolling, Slideshow Loop

    make powerpoint presentation run automatically

  6. How to Run PowerPoint Slideshow Automatically Without Clicking

    make powerpoint presentation run automatically

VIDEO

  1. How to Create a Presentation Using Power Point l How to Create a Powerpoint Presentation

  2. how to make presentation in PowerPoint

  3. How To Create Professional PowerPoint Presentation Slides Best PowerPoint Presentation EVER

  4. How To Create a PowerPoint Presentation |Powerpoint interface and introduction#powerpoint #msoffice

  5. MS PowerPoint Tutorial || How to make a power point presentation || EP

  6. powerpoint

COMMENTS

  1. Create a self-running presentation

    Windows macOS On the Slide Show tab, click Set Up Slide Show. Under Show type, pick one of the following: To allow the people watching your slide show to have control over when they advance the slides, select Presented by a speaker (full screen).

  2. How to Play PowerPoint Slides Automatically

    How to Play PowerPoint Slides Automatically without Clicking: Option 1 There are a couple of different ways to make your slides run automatically, and we'll go over both options. This first option is for when you need a really customized presentation: personalized timing for each slide, voiceovers, or laser pointer gestures .

  3. How to Run a PowerPoint Slide Show Automatically (Set Up a ...

    To set up a PowerPoint presentation to run automatically, but allow those watching the slide show to have control over when they advance slides: Click the Slide Show tab in the Ribbon and then click Set Up Slide Show. A dialog box appears. Under Show type, select Presented by a speaker (full screen). This is the default setting for slide shows.

  4. Start a presentation automatically with a PowerPoint Show

    Select File > Save as (or Save a Copy ). Click More options. Browse to the folder where you want to save your presentation. In the File name box, type a name for your presentation. Under Save as type, select PowerPoint Show. The file is saved as a .ppsx file. When the file is double-clicked, it opens as a slide show. Edit a .ppsx file

  5. Auto-play a PowerPoint presentation

    567 Share 180K views 1 year ago Tips and Tricks With Microsoft PowerPoint, you can use a self-running presentation to run unattended in a booth or kiosk at a trade show or convention, or you...

  6. How to Loop a PowerPoint Slide Show to Repeat Automatically

    Step 1: Apply transitions to automatically advance slides during a slide show Transitions occur between slides when you run a slide show. To apply transitions to automatically advance slides during a slide show: In Normal View or Slide Sorter View, display or select a slide. Click the Transitions tab in the Ribbon.

  7. How to Use Autoplay in a PowerPoint Presentation

    In the editing view, right click the video you want to automate and select the down arrow to the right of the Start button. Select Automatically from the dropdown menu. Save the PowerPoint presentation. Now, it'll start playing automatically when you advance to the slide with your embedded video while in presenter view.

  8. How to Create an Auto-Playing PowerPoint Presentation

    There are several options for creating a PowerPoint presentation automatically. All of these can be accessed under the Slide Show tab. Slide Show > Set Up Slide Show There are three options...

  9. PowerPoint Show: How to Launch a Presentation Automatically

    Choose the File tab. Select Save As. Pick the Save as type as PowerPoint Show. Type a name for your slide show in the File name text box (you can use the same name and location as your .pptx/presentation file) and click Save. Your PowerPoint slide show file is saved with a .ppsx extension. Now, the next time you or anyone else opens your ...

  10. How to make PowerPoint Slides advance automatically (2021)

    In this Microsoft PowerPoint 2019 tutorial course you are going to learn how to make PowerPoint Slide advance automatically instead / without having to click...

  11. How to Make a PowerPoint Presentation Play Automatically

    You have the option to configure your presentation for three automatic play modes: "Presented by a speaker (full screen)," "Browsed by an individual (window)" and "Browsed at a Kiosk (full screen)." Your selection determines how users can interact with the slides at any given time. PowerPoint Slideshow Loop Options

  12. How do I set a Powerpoint presentation to start automatically when

    Once you have completed a presentation in Powerpoint, you can save it as a PowerPoint Show. This means your audience will see the slide show run when they open the file, rather than seeing the slides in edit mode. With your presentation open, click File, Save as. Name your presentation, and then click the Save as type dropdown menu underneath.

  13. Powerpoint slideshow run automatically

    Answer ofirperez Replied on March 6, 2019 Report abuse Hello Irvinraw! I am an independent adviser willing to help. The following link has the information how to automatically start your presentation when the file is opened. Make a slide show that starts automatically when opened. https://support.office.com/en-us/article/start-... US & ad = US

  14. How to Loop a PowerPoint Presentation

    First, open your PowerPoint presentation in which you would like to loop. Once open, navigate to the "Set Up" group of the "Slide Show" tab and then select the "Set Up Slide Show" button. The "Set Up Show" window will appear. In the "Show options" group, check the box next to "Loop Continuously until Esc."

  15. Generating PowerPoint presentations automatically

    See how to create PowerPoint slides and presentations automatically, from Excel data or from other data sources. You can generate a new slide for every data ...

  16. How to Make Slides Play Automatically in PowerPoint

    Setting up an automatic slide show in PowerPoint is easy and can be done in just a few steps: Open your PowerPoint presentation. Click on the "Transitions" tab in the ribbon. In the "Timing" section, check "After" and enter the number of seconds you want each slide to appear. Click "Apply to All Slides". Save your presentation.

  17. Create a self-running presentation

    Windows macOS On the Slide Show tab, click Set Up Slide Show. Under Show type, pick one of the following: To allow the people watching your slide show to have control over when they advance the slides, select Presented by a speaker (full screen).

  18. Start a presentation automatically with a PowerPoint Show

    Microsoft security Accessibility center Make it so that your PowerPoint presentation starts automatically by saving it as a .ppsx file.

  19. Start powerpoint presentation on startup

    DrMatsJansson Created on April 5, 2016 Start powerpoint presentation on startup I want a powerpoint presentation to start and run when I boot a computer. I have created a *.cmd file with the only string "C:\path-to-POWERPNT.exe" /S "c:\path-to-presentation.pptx"

  20. Play a video automatically in a slide show

    Click on the Playback tab. Next to Start, click the down arrow, and select Automatically. When you are delivering your presentation in Slide Show View or Presenter View, the video will play automatically when you arrive at the slide. If your slide doesn't have a video in it yet, you can add one.

  21. How ro run the slideshow automatically on booting up the PC or logging

    I noticed that that the Startup was empty. I dragged the shortcut to slide show and placed it in startup. Next time, during the startup, the slide show played successfully. Then I cheked the folder in which you need to put the short cut: C:\Users\ [username]\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup.

  22. How to Loop a PowerPoint Slideshow so It Automatically Starts Over

    Open the "Set Up Slide Show" menu. 3. In the pop-up window that appears, click on the box next to "Loop continuously until 'Esc'" so that a small checkmark appears inside the box. Feel free to ...

  23. PowerPoint-How to enable automatic animation without click

    Zaeden Created on September 5, 2020 PowerPoint-How to enable automatic animation without click. I want the text to automatically disappear in 00.25 seconds and appear again about four times creating a pattern but I can't always keep clicking for that. This thread is locked. You can vote as helpful, but you cannot reply or subscribe to this thread.