S T R E E T OF W A L L S

Consulting case study types.

In the previous chapter , we described some well-known frameworks for evaluating companies and industries—frameworks that are important in Management Consulting Case Studies, and can broadly be applied to many different types of Consulting Business Situation Cases . We also described a number of analytical techniques that frequently come up in Business Situation Cases. In this chapter we’ll take a deeper look into common types of Business Situation Cases, evaluating the core concepts in them and the methodologies for approaching them (using ideas from the frameworks from the previous chapter to help us organize our approach, and the analytical techniques from the previous chapter to help us drive to an answer).

Each of these Case Study categories occurs very frequently in Management Consulting Case Study interviews, so you should be familiar with the basic issues that tend to occur over and over when they come up. In short, you should practice each of these Case types multiple times until you feel confident that you could a new Case of this type in a live interview.

Here are the eight primary types of Business Situation Case Studies as we see them:

Profitability Optimization

Pricing optimization, industry landscape & competitor dynamics, new product or project, growth plan/strategy, market entry or expansion, merger/acquisition/joint venture, start-up/early-stage venture.

Note that in most situations, a given Case will lend itself to several different categories. In the discussion below, we will attempt to enumerate the different combinations of Case Study situations that tend to occur together in the same Case.

In both good and bad economies, companies continually seek to optimize their Revenue model and their Cost structure.  The goal, ultimately, is for the company to use Invested Capital as efficiently as possible.

The two core components of a Profitability Optimization case are a Cost Assessment and a Revenue Assessment. Sometimes, only one of the two will be required for the Case. Note that Profitability Optimization situations often arise as part of a Case Study of another type—for example, in a Case Study involving pressures from competitors or substitute products, you may need to assess and optimize the Company’s Cost structure to determine it is competitive. Or, it could be that the case revolves around the Company’s Cost structure optimization, the job candidate may need to perform some qualitative analysis of the competitor or supplier landscape.  As you can see, a variation on Profitability Optimization can arise as part of many different Business Situation Cases.

Whenever Profitability Optimization is a key issue, the interviewer will usually highlight that profitability has been declining (or is projected to decline) and the Case will involve identifying the sources of the decline and potentially how to reverse or obviate it.

Example Case Situations

  • The client is a low-cost airline based in Singapore, serving 24 destinations in the Southeast Asian market.  The Airline’s profitability was strong until 2010 and has since seen a declining trend and is now only just barely profitable.  The CEO would like you to determine what is causing the profitability decline and suggest a strategy to reverse this trend.
  • The client is a market-leading, niche ski equipment manufacturer based in Colorado. Profitability has remained steady but the CEO has noticed from reading industry annual reports that two publicly-listed competing ski equipment manufacturers have meaningfully higher profit margins and have also been increasing their top line (Revenue). The CEO would like to understand the drivers of these differences.

Note that both of these Cases would involve some degree of Market Landscape/Competitor Dynamics analysis in addition to Profitability Optimization.

Core Concepts and Structure

Scenario: The client has determined that profitability margins have been (or are projected to be declining) and has requested that you analyze the causes of this decline and put forth recommendations to reverse it.

Expense Analysis

  • Gather current expense breakdown and historical expense breakdown (this question alone will only help to get you towards the key focus area, as the interviewer will only have so much information).
  • Identify the “bang” areas (this is Consultant lingo for expense areas that account for a large percent of the total).
  • Analyze the key Fixed and Variable expense components and identify any meaningful changes in expense areas.
  • Fixed Expenses might include overhead, fixed equipment expenses or depreciation, distribution, rent, and/or interest
  • Variable Expenses might include raw materials, labor, sales, and/or distribution costs
  • Request information on competitor Cost structures from the interviewer to see where the company’s Cost structure may be inefficient.
  • Assess whether any expense areas could be cut with minimal or no impact on sales.

Revenue/Sales Analysis

  • Gather as detailed of information as possible on current sales volumes and pricing and historical volumes and pricing. Use this information to determine growth rates.
  • Identify the “bang” areas (consultant lingo for revenue streams that account for a large percent of the total, and/or a large percentage of the growth in the total).
  • Analyze the key product areas and identify any meaningful changes in volumes and prices.
  • Request information on competitor Revenue models (volume and pricing) from the interviewer to see where the company is potentially missing profitable business activity.
  • Assess whether any changes could be made to improve overall Revenue or Revenue per unit sold.
  • Pricing change suggestions/analysis (e.g., factors behind price elasticity; see Pricing Optimization Case descriptions below)
  • Volume assessment and ways to improve volumes
  • Identify changing customer desires/demands and respond accordingly.
  • Invest in and/or reformulate marketing strategy.
  • Expand distribution channels.
  • Expand sales force or customer service.
  • Expand production capacity.
  • Expand product/service portfolio (see New Product or Project, Growth Plan/Strategy, and Market Entry or Expansion Case descriptions below).
  • Make an acquisition or enter into a joint venture.
  • Assess which products/divisions might have the largest growth opportunities and allocate investments accordingly.
  • What would customers be willing to pay if Facebook shifted to a subscription model (we heard that this Case was conducted by the San Francisco office of a major Consulting firm recently, though the client being analyzed was not Facebook)?
  • A long-stay hotel chain would like to maximize profitability by determining the optimal pricing for different lengths of stays and types of rooms.
  • An online movie-streaming company is seeking to select the optimal price mix for its product offering in order to maximize profitability.

Like Profitability Optimization, this is a type of Case Study in which many of the other Case Study types might be relevant (for example, Industry Landscape, Competitor Dynamics, Growth Plan/Strategy, etc.)

Scenario: The client is deciding how to set prices so as to maximize profitability.

  • Competitor/substitute pricing is the key element here—particularly if there is no major differentiation or benefit to the client’s products relative to substitutes.
  • Price of substitute products/services
  • Is the product sufficiently different to justify a higher price? (This points to the threat of substitutes.)
  • Customer loyalty/lock-in (as an example: many lower-priced colas have failed to successfully compete against Coca-Cola due to consumer brand loyalty)
  • Remember to ask about: Price Elasticity, Price Elasticity, Price Elasticity!
  • Interviewers will often give you sufficient information to assess the impact on volume with a price adjustment and expect you to make the calculation.
  • The higher the absolute value of Demand Elasticity (i.e., the more volume decreases when prices increase), the more likely it is that a price reduction would be beneficial. Likewise, the lower the absolute value of Demand Elasticity (i.e., volume barely decreases when prices increase), the more likely it is that a price increase would be beneficial.
  • Expense-driven pricing analysis
  • What is the fully-loaded cost for the client to produce the product or offer the service? How does this compare to the price?
  • How does client’s fully-loaded cost compare with competitor pricing?
  • Note: In situations in which the client’s cost is higher than the competitor price , it is usually a good recommendation to exit this product or service unless it can be demonstrated that:
  • There is a clear path to reduce client production costs, or
  • The competitor price is temporary and unsustainable.
  • Customer-driven pricing analysis
  • How much would customers be willing to pay for this product?  (You are not expected to be able to answer such questions, but ideas on how you might approach such questions are important—for example, running a survey, looking at applicable Case examples, looking at pricing structures for comparable products, etc.)
  • What is the current state of demand and supply for the product or service (for example: would an increase in the number of orange juice manufacturers and orange tree groves be putting significant pressure on orange juice prices)?
  • What are the alternatives for the customer and the relevant prices? I.e., is the threat of substitutes substantial or can it be mitigated?
  • A client is a large nutrition, health & wellness Company and is considering divesting its non-core infant foods subsidiary in order to free up capital to invest in higher growing industries.  The CEO would like you to assess the industry landscape of the infant foods business in Western Europe.
  • A client is a global financial services firm that is considering allocating more resources to the facilitation of electronic fund transfers globally.  The CEO wants to better understand the market landscape and develop a strategic plan to increase the Company’s share of the market.

Scenario: The client wants you to understand and assess an industry (this often overlaps with Market Entry, New Product or Project, or Growth Plan/Strategy Cases, described in more detail below).  Usually, the goal is to assess the characteristics of an industry and to determine whether or not it is an attractive industry to enter, to ramp up, or potentially to exit.

  • Market/Industry Landscape
  • Current market size
  • Projected market growth
  • Customer mix (a.k.a. Customer Segmentation )
  • Industry-wide profitability
  • Mergers & Acquisitions activity in the industry
  • Competitive Advantage/ Barriers to Entry
  • Supply chain: who are the key suppliers to the industry? (Assess this only if relevant)
  • Brand loyalty
  • Technology, regulatory issues, or other key topics relevant to the market
  • Competitor Dynamics
  • Key competitors in the market and their strategies
  • Current market shares and shares over time
  • Used to derive Market Concentration (i.e., what portion of the market is served by the top 3/5/10 companies in the market?)
  • Product/service differences among competitors
  • Any recent moves/threats by a key player to the market or a new entrant?
  • A client is a durable consumer equipment manufacturer attempting to develop a “green” washing machine that employs special technology, resulting in 60% less water use and cleaning 10% more effectively than standard washing machines.  The CEO would like help to determine the product’s market potential and the strategy to bring it to market.
  • A client is a pharmaceutical company that is engaged in Research & Development on a drug that would both lower cholesterol and reduce obesity (i.e., help in significant weight loss).  The CEO would like to know whether this drug would gain traction, and if so, what is the potential market size and the optimal price for such a drug.

Once again, this is a type of Case Study where many of the other Case categories might be relevant (Industry Landscape, Competitor Dynamics, Growth Plan/Strategy, Market Entry or Expansion, etc.). Note that such cases could also involve decisions such as the purchase of a major information technology system (in this case, many of the acquisition concepts could be applied).  It could also involve the assessment of a new investment project, such as the development of a new major manufacturing or sales facility.

Scenario: The client is developing a new product and would like your assessment of the feasibility of this product. Would the product be profitable and beneficial in the marketplace?

  • Product Snapshot (Less relevant for New Project cases)
  • Will the client have any competitive advantage that prevents competitor entry (such as a patent or a way to lock in customers) once the client has unveiled the new product?
  • How is the client’s product different from and/or better than competing products? What are the substitute products?
  • Pros and cons of client product (for example, environmental and social considerations)
  • Is there a risk that that the new product will cannibalize another of the client’s products?
  • Customer Strategy (Less relevant for New Project cases)
  • What is the appropriate customer mix to target? How does this affect profitability and marketing strategy?
  • What are the distribution channels? Can the client use its existing distribution channels?
  • What is the methodology/strategy to attract customers to try the product and potentially switch?
  • What is the methodology/strategy to retain newly acquired customers?
  • Market Entry Strategy (Mostly less relevant for New Project cases)
  • Competitive advantages/ Barriers to Entry
  • Approach to entering (Acquisition or enter organically?)
  • Time/investment required to enter market
  • Product pricing strategy
  • Technology, regulatory or other risks to entering this market
  • Market Landscape
  • Future market growth
  • Current customer and product mix
  • Key competitors in the market, their strategy, Market Shares (current and historically over time), product differences and potential response to client’s actions
  • Product/Project Funding
  • Does the projected profit justify the required the Research and Development expenditure, the initial capital requirements, and any ongoing investment needs?
  • What is the Opportunity Cost of the required funding?
  • What is the required financing and how is the Research & Development being financed?
  • Will the project result in Economies of Scale (i.e., cost reductions for increased production) elsewhere in the company? (Less relevant for New Product cases)
  • The client is a German carpet manufacturer that has seen sales decline dramatically in its North American operation.  The client would like you to help it develop a strategic plan for sales growth in North America and to determine the root causes of the sales decline.
  • The client is a surf apparel Company that has three stores on the West Coast of the United States and is looking to grow its store base significantly across the continent.  The CEO would like help designing a store rollout strategy across North America.

Yet again, this is a type of Case Study where many of the other Case categories might be relevant (Industry Landscape, Competitor Dynamics, New Product or Project, Market Entry or Expansion, etc.)

Scenario: The client is seeking to grow its business, whether it involves growing a certain product’s sales, growing in a certain geographical region, increasing total sales, etc.

  • Ways to increase number of units sold
  • Optimize prices (See description of Pricing Optimization above)
  • Increase share of wallet (fancy term used by Consultants to mean that the client captures more of a typical customer’s spending in a particular area than it previously did; analogous to Market Share )
  • Determine which products/divisions have the largest growth opportunities and allocate investments accordingly
  • Identify changing customer preferences/demands and respond accordingly
  • Invest in and/or reformulate marketing strategy
  • Investigate means and requirements to expand distribution channels
  • Investigate means and requirements to expand capacity
  • Investigate means and requirements to expand sales force / customer service
  • Investigate means and requirements to expand product/service portfolio (see description of Market Entry or Expansion below)
  • Make an acquisition or enter into a joint venture (see description of Merger/Acquisition/Joint Venture below)
  • Always drive towards Profitable Growth : in any growth case, be sure to discuss this issue. Growing Revenue in and of itself is usually not a good outcome if the Costs of the growth exceed the Revenue, or if there were other growth opportunities that would have yielded a higher return on investment but are mutually exclusive (see Opportunity Cost).
  • The client is an online yoga apparel retailer looking to enter the European market. The CEO would like help in formulating an entry strategy.
  • A high-end watch manufacturer has developed a high quality watch called the “outdoors” watch in order to attract the wealthy, younger audience.  The CEO would like to develop a strategy to attract this customer segment.

This category of Case Study frequently overlaps with several other Case categories (Industry Landscape, Competitor Dynamics, New Product or Project, Growth Plan/Strategy, etc.)

Scenario: A client is seeking to expand or enter into a new market, whether it be a new geographical region or an additional customer segment.

  • Competitive advantage/ Barriers to Entry
  • Entry Strategy
  • Approach to entering (acquisition or enter organically?)
  • Customer mix/segmentation
  • Your client is a European online white goods retailer that is considering acquiring a North American online furniture retailer.
  • Your client is a U.S. specialty chemical producer that is considering acquiring a regional specialty chemical producer in Indonesia.

As you might expect by now, this is a type of case where many of the other case segments are relevant. In particular, Merger/Acquisition/JV activity often represents one method of implementing a Growth Plan/Strategy, a New Product or Project, or a Market Entry or Expansion.

Scenario: The client is considering either acquiring a company or entering into a Joint Venture, driven by many potential factors such as wanting to increase market share, widen product portfolio, take out a potential competitive threat, etc.

Important: For this Case type, you should ask questions as to why the Company is contemplating such an action . The responses to these questions can help steer you to the right analysis, as the responses will often indicate what the key considerations behind the acquisition/JV are from the client’s perspective. Thus you should perform a standard Merger/Acquisition/JV analysis as outlined below, but then generally pivot to the right framework for analyzing the business scenario from the aforementioned categories, depending on the situation.

  • Evaluate price to acquire (use back-of-the-envelope Valuation techniques to consider whether the deal is reasonably priced, such as those based on Comparable Company Analysis or Precedent Transaction Analysis )
  • Market position
  • Customer Concentration and customer certainty
  • Supplier relationships and supplier certainty
  • Barriers to Entry
  • Reputation and brand loyalty
  • Product/regulatory/technology risks
  • Pay-Back Period / Net Present Value / Internal Rate of Return based on current operations and growth estimates
  • Add in Cost or Revenue improvements from Synergies (see below)
  • Subtract out Integration and Restructuring expenses (also determine whether the project is feasible)
  • Compare with similar projections if the Company were to endeavor to grow organically (required capital expenditures, cost of marketing strategy, etc.)
  • Ability to combine or leverage joint distribution channels across products produced by acquirer or target
  • Value of expending geographic/market reach
  • Cost synergies (such as spreading overhead costs across a larger combined business or combining redundant IT systems)
  • Strategic fit
  • Cultural challenges
  • Competitor response
  • Plan to exit (if relevant—note that this will always be relevant for Private Equity firms)
  • Plan to restructure the organization, if any, and how/why

While consulting firms rarely work for Start-up companies due to the high fees typically charged, there are increasingly Case Study questions that discuss start-ups. Some Consulting firms have even begun the practice of working for Start-up companies and receiving equity compensation from the Start-up in exchange for reduced cash Consulting fees.

Importantly, this topic is in many ways covered when thinking about a company entering a new market or developing a new product, although there are usually some additional issues to consider for a Start-up company. (Most of these additional issues fall into the “Business Plan” category for a Start-up company.) Additionally, there is generally significant overlap with the industry landscape section.

  • Two real estate entrepreneurs are contemplating setting up a co-working space in downtown Chicago to attract the increasing number of young IT entrepreneurs in the area.  Discuss the key considerations for a business plan for such a venture.
  • Siggi, a student from Iceland at Stanford University, has determined that there is an enormous opportunity for Icelandic-style yogurt in the North American market. He is in the process of securing funding to produce the yogurt on a farm in Oregon and would like input regarding the key considerations for the yogurt to be a success.

Situation: A potential client has launched a new company to develop a new product or technology that is expected to have positive yet disruptive consequences for a particular market or industry. The client would like your advice regarding specific issues in the company development or product rollout, and any thoughts regarding optimal company strategy.

  • Competitive advantage/ Barriers to Entry (with a Start-up, this is a crucial piece of the analysis —can the Start-up enter the market successfully? Will the Start-up will have some sort of competitive advantage, whether it be proprietary technology or access to particular distribution channels?)
  • Current market size (if the product a new concept, then you would typically be asked to assess the industry of a substitute product or service, or use relevant comparable products or services to estimate the potential market size for the new concept)
  • Key competitors in the market, their strategy, current market shares and shares over time, product differences and potential response to entry
  • Likely customers and customer mix (a.k.a. Customer Segmentation )
  • Industry-wide profitability (to the extent applicable)
  • Technology, regulatory issues, or other key topics relevant to the product or market
  • Business Plan (the interviewer might ask you to compile a very simple business plan, after he or she gives you some information; key components are given here)
  • Product/Service
  • What is the product/service? What are pros and cons of this product/service? How does this compare to existing products on the market?
  • What will be the competitive advantage and/or barriers to entry for a product of this type?
  • Customers and Distribution
  • Who are the target customers?
  • What are the core distribution channels?
  • What is the marketing plan?
  • Financing/Profitability
  • What are the initial funding requirements prior to cash flow Break-Even? How does this compare with expected future profitability?
  • What are the projected Revenue and Costs for the next three years?
  • Management and Oversight
  • Management: experience and abilities
  • Preliminary Investors: reputation, expertise, and ability to add legitimacy to the new enterprise (and potentially invest more in the company)
  • Key Directors and Advisors

Being able to discuss the core aspects of analyzing a Start-up company highlights your ability to quickly answer questions about a new project or idea that may be thrown at you when you are with clients.

Additional Resources

There are a number of guides published and online that attempt to discuss different types of Consulting Case Study questions in a comprehensive and informative way. Our feeling is that most of them are not particularly helpful or are too expensive. There are two, however, that we have found to add quite of a bit of value as an “add-on” to the discussion above, and are therefore worth checking out. Please comment on this page or email us directly if you have a suggestion for an additional resource:

  • INSEAD Consulting Club Handbook (see pp. 47-53 for discussion of different Case Study Types)
  • Crack the Case System by David Ohrvall
  • Case Interview: A comprehensive guide
  • Pyramid Principle
  • Hypothesis driven structure
  • Fit Interview
  • Consulting math
  • The key to landing your consulting job
  • What is a case interview?
  • What do I need to learn to solve cases?
  • How do I practice for case interviews?
  • Fit interviews
  • Interview day - what to expect, with tips
  • How we can help

1. The key to landing your consulting job.

Case interviews - where you are asked to solve a business case study under scrutiny - are the core of the selection process right across McKinsey, Bain and BCG (the “MBB” firms). This interview format is also used pretty much universally across other high-end consultancies; including LEK, Kearney, Oliver Wyman and the consulting wings of the “Big Four”.

If you want to land a job at any of these firms, you will have to ace multiple case interviews.

It is increasingly likely that you will also have to solve online cases given by chatbots etc. You might need to pass these before making it to interview or be asked to sit them alongside first round interviews.

Importantly, case studies aren’t something you can just wing . Firms explicitly expect you to have thoroughly prepared and many of your competitors on interview day will have been prepping for months.

Don’t worry though - MCC is here to help!

This article will take you through a full overview of everything you’ll need to know to do well, linking to more detailed articles and resources at each stage to let you really drill down into the details.

As well as traditional case interviews, we’ll also attend to the new formats in which cases are being delivered and otherwise make sure you’re up to speed with recent trends in this overall part of consulting recruitment.

Before we can figure out how to prepare for a case interview, though, we will first have to properly understand in detail what exactly you are up against. What format does a standard consulting case interview take? What is expected of you? How will you be assessed?

Let's dive right in and find out!

Professional help

Before going further, if this sounds like a lot to get your head around on your own, don't worry - help is available!

Our Case Academy course gives you everything you need to know to crack cases like a pro:

Case Academy Course

To put what you learn into practice (and secure some savings in the process) you can add mock interview coaching sessions with expereinced MBB consultants:

Coaching options

And, if you just want an experienced consultant to take charge of the whole selection process for you, you can check out our comprehensive mentoring programmes:

Explore mentoring

Now, back to the article!

2. What is a case interview?

Before we can hope to tackle a case interview, we have to understand what one is.

In short, a case interview simulates real consulting work by having you solve a business case study in conversation with your interviewer.

This case study will be a business problem where you have to advise a client - that is, an imaginary business or similar organisation in need of guidance.

You must help this client solve a problem and/or make a decision. This requires you to analyse the information you are given about that client organisation and figure out a final recommendation for what they should do next.

Business problems in general obviously vary in difficulty. Some are quite straightforward and can be addressed with fairly standard solutions. However, consulting firms exist precisely to solve the tough issues that businesses have failed to deal with internally - and so consultants will typically work on complex, idiosyncratic problems requiring novel solutions.

Some examples of case study questions might be:

  • How much would you pay for a banking licence in Ghana?
  • Estimate the potential value of the electric vehicle market in Germany
  • How much gas storage capacity should a UK domestic energy supplier build?

Consulting firms need the brightest minds they can find to put to work on these important, difficult projects. You can expect the case studies you have to solve in interview, then, to echo the unique, complicated problems consultancies deal with every day. As we’ll explain here, this means that you need to be ready to think outside the box to figure out genuinely novel solutions.

2.1. What skills do case interviews assess?

Reliably impressing your interviewers means knowing what they are looking for. This means understanding the skills you are being assessed against in some detail.

Overall, it’s important always to remember that, with case studies, there are no strict right or wrong answers. What really matters is how you think problems through, how confident you are with your conclusions and how quick you are with the back of the envelope arithmetic.

The objective of this kind of interview isn’t to get to one particular solution, but to assess your skillset. This is even true of modern online cases, where sophisticated AI algorithms score how you work as well as the solutions you generate.

If you visit McKinsey , Bain and BCG web pages on case interviews, you will find that the three firms look for very similar traits, and the same will be true of other top consultancies.

Broadly speaking, your interviewer will be evaluating you across five key areas:

2.1.1.One: Probing mind

Showing intellectual curiosity by asking relevant and insightful questions that demonstrate critical thinking and a proactive nature. For instance, if we are told that revenues for a leading supermarket chain have been declining over the last ten years, a successful candidate would ask:

“ We know revenues have declined. This could be due to price or volume. Do we know how they changed over the same period? ”

This is as opposed to a laundry list of questions like:

  • Did customers change their preferences?
  • Which segment has shown the decline in volume?
  • Is there a price war in the industry?

2.1.2. Two: Structure

Structure in this context means structuring a problem. This, in turn, means creating a framework - that is, a series of clear, sequential steps in order to get to a solution.

As with the case interview in general, the focus with case study structures isn’t on reaching a solution, but on how you get there.

This is the trickiest part of the case interview and the single most common reason candidates fail.

We discuss how to properly structure a case in more detail in section three. In terms of what your interviewer is looking for at high level, though, key pieces of your structure should be:

  • Proper understanding of the objective of the case - Ask yourself: "What is the single crucial piece of advice that the client absolutely needs?"
  • Identification of the drivers - Ask yourself: "What are the key forces that play a role in defining the outcome?"

Our Problem Driven Structure method, discussed in section three, bakes this approach in at a fundamental level. This is as opposed to the framework-based approach you will find in older case-solving

Focus on going through memorised sequences of steps too-often means failing to develop a full understanding of the case and the real key drivers.

At this link, we run through a case to illustrate the difference between a standard framework-based approach and our Problem Driven Structure method.

2.1.3. Three: Problem Solving

You’ll be tested on your ability to identify problems and drivers, isolate causes and effects, demonstrate creativity and prioritise issues. In particular, the interviewer will look for the following skills:

  • Prioritisation - Can you distinguish relevant and irrelevant facts?
  • Connecting the dots - Can you connect new facts and evidence to the big picture?
  • Establishing conclusions - Can you establish correct conclusions without rushing to inferences not supported by evidence?

2.1.4. Four: Numerical Agility

In case interviews, you are expected to be quick and confident with both precise and approximated numbers. This translates to:

  • Performing simple calculations quickly - Essential to solve cases quickly and impress clients with quick estimates and preliminary conclusions.
  • Analysing data - Extract data from graphs and charts, elaborate and draw insightful conclusions.
  • Solving business problems - Translate a real world case to a mathematical problem and solve it.

Our article on consulting math is a great resource here, though the extensive math content in our MCC Academy is the best and most comprehensive material available.

2.1.5. Five: Communication

Real consulting work isn’t just about the raw analysis to come up with a recommendation - this then needs to be sold to the client as the right course of action.

Similarly, in a case interview, you must be able to turn your answer into a compelling recommendation. This is just as essential to impressing your interviewer as your structure and analysis.

Consultants already comment on how difficult it is to find candidates with the right communication skills. Add to this the current direction of travel, where AI will be able to automate more and more of the routine analytic side of consulting, and communication becomes a bigger and bigger part of what consultants are being paid for.

So, how do you make sure that your recommendations are relevant, smart, and engaging? The answer is to master what is known as CEO-level communication .

This art of speaking like a CEO can be quite challenging, as it often involves presenting information in effectively the opposite way to how you might normally.

To get it right, there are three key areas to focus on in your communications:

  • Top down : A CEO wants to hear the key message first. They will only ask for more details if they think that will actually be useful. Always consider what is absolutely critical for the CEO to know, and start with that. You can read more in our article on the Pyramid Principle .
  • Concise : This is not the time for "boiling the ocean" or listing an endless number possible solutions. CEOs, and thus consultants, want a structured, quick and concise recommendation for their business problem, that they can implement immediately.
  • Fact-based : Consultants share CEOs' hatred of opinions based on gut feel rather than facts. They want recommendations based on facts to make sure they are actually in control. Always go on to back up your conclusions with the relevant facts.

For more detail on all this, check out our full article on delivering recommendations .

Prep the right way

2.2. where are case interviews in the consulting selection process.

Not everyone who applies to a consulting firm will have a case interview - far from it!

In fact, case interviews are pretty expensive and inconvenient for firms to host, requiring them to take consultants off active projects and even fly them back to the office from location for in-person interviews. Ideally, firms want to cut costs and save time by narrowing down the candidate pool as much as possible before any live interviews.

As such, there are some hoops to jump through before you make it to interview rounds.

Firms will typically eliminate as much as 80% of the applicant pool before interviews start. For most firms, 50%+ of applicants might be cut based on resumes, before a similar cut is made on those remaining based on aptitude tests. McKinsey currently gives their Solve assessment to most applicants, but will use their resulting test scores alongside resumes to cut 70%+ of the candidate pool before interviews.

You'll need to be on top of your game to get as far as an interview with a top firm. Getting through the resume screen and any aptitude tests is an achievement in itself!

For readers not yet embroiled in the selection process themselves, let’s put case interviews in context and take a quick look at each stage in turn. Importantly, note that you might also be asked to solve case studies outside interviews as well…

2.2.1. Application screen

It’s sometimes easy to forget that such a large cut is made at the application stage. At larger firms, this will mean your resume and cover letter is looked at by some combination of AI tools, recruitment staff and junior consulting staff (often someone from your own university).

Only the best applications will be passed to later stages, so make sure to check out our free resume and cover letter guides, and potentially get help with editing , to give yourself the best chance possible.

2.2.2. Aptitude tests and online cases

This part of the selection process has been changing quickly in recent years and is increasingly beginning to blur into the traditionally separate case interview rounds.

In the past, GMAT or PST style tests were the norm. Firms then used increasingly sophisticated and often gamified aptitude tests, like the Pymetrics test currently used by several firms, including BCG and Bain, and the original version of McKinsey’s Solve assessment (then branded as the Problem Solving Game).

Now, though, there is a move towards delivering relatively sophisticated case studies online. For example, McKinsey has replaced half the old Solve assessment with an online case. BCG’s Casey chatbot case now directly replaces a live first round case interview, and in the new era of AI chatbots, we expect these online cases to quickly become more realistic and increasingly start to relieve firms of some of the costs of live interviews.

Our consultants collectively reckon that, over time, 50% of case interviews are likely to be replaced with these kinds of cases. We give some specific advice for online cases in section four. However, the important thing to note is that these are still just simulations of traditional case interviews - you still need to learn how to solve cases in precisely the same way, and your prep will largely remain the same.

2.2.3. Rounds of Interviews

Now, let’s not go overboard with talk of AI. Even in the long term, the client facing nature of consulting means that firms will have live case interviews for as long as they are hiring anyone. And in the immediate term, case interviews are still absolutely the core of consulting selection.

Before landing an offer at McKinsey, Bain, BCG or any similar firm, you won’t just have one case interview, but will have to complete four to six case interviews, usually divided into two rounds, with each interview lasting approximately 50-60 minutes .

Being invited to first round usually means two or three case interviews. As noted above, you might also be asked to complete an online case or similar alongside your first round interviews.

If you ace first round, you will be invited to second round to face the same again, but more gruelling. Only then - after up to six case interviews in total, can you hope to receive an offer.

2.3. Typical case interview format

Before we dive in to the nuts and bolts of case cracking, we should give you a bit more detail on what exactly you’ll be up against on interview day.

Case interviews come in very similar formats across the various consultancies where they are used.

The standard case interview can be thought of as splitting into two standalone sub-interviews. Thus “case interviews” can be divided into the case study itself and a “fit interview” section, where culture fit questions are asked.

This can lead to a bit of confusion, as the actual case interview component might take up as little as half of your scheduled “case interview”. You need to make sure you are ready for both aspects.

To illustrate, here is the typical case interview timeline:

  • First 15-30 minutes: Fit Interview - with questions assessing your motivation to be a consultant in that specific firm and your traits around leadership and teamwork. Learn more about the fit interview in our in-depth article here .
  • Next 30-40 minutes: Case Interview - solving a case study
  • Last 5 minutes: Fit Interview again - this time focussing on your questions for your interviewer.

Both the Case and Fit interviews play crucial roles in the finial hiring decision. There is no “average” taken between case and fit interviews: if your performance is not up to scratch in either of the two, you will not be able to move on to the next interview round or get an offer.

NB: No case without fit

Note that, even if you have only been told you are having a case interview or otherwise are just doing a case study, always be prepared to answer fit questions. At most firms, it is standard practice to include some fit questions in all case interviews, even if there are also separate explicit fit interviews, and interviewers will almost invariably include some of these questions around your case. This is perfectly natural - imagine how odd and artificial it would be to show up to an interview, simply do a case and leave again, without talking about anything else with the interviewer before or after.

2.4. Differences between first and second round interviews

Despite interviews in the first and second round following the same format, second/final round interviews will be significantly more intense. The seniority of the interviewer, time pressure (with up to three interviews back-to-back), and the sheer value of the job at stake will likely make a second round consulting case interview one of the most challenging moments of your professional life.

There are three key differences between the two rounds:

  • Time Pressure : Final round case interviews test your ability to perform under pressure, with as many as three interviews in a row and often only very small breaks between them.
  • Focus : Since second round interviewers tend to be more senior (usually partners with 12+ years experience) and will be more interested in your personality and ability to handle challenges independently. Some partners will drill down into your experiences and achievements to the extreme. They want to understand how you react to challenges and your ability to identify and learn from past mistakes.
  • Psychological Pressure: While case interviews in the first round are usually more focused on you simply cracking the case, second round interviewers often employ a "bad cop" strategy to test the way you react to challenges and uncertainty.

2.5. Differences between firms

For the most part, a case interview is a case interview. However, firms will have some differences in the particular ways they like to do things in terms of both the case study and the fit component.

As we’ll see, these differences aren’t hugely impactful in terms of how you prepare. That said, it's always good to know as much as possible about what you will be going up against.

2.5.1. Candidate led vs interviewer led case formats

Most consulting case interview questions test your ability to crack a broad problem, with a case prompt often going something like:

" How much would you pay to secure the rights to run a restaurant in the British Museum? "

You, as a candidate, are then expected to identify your path to solve the case (that is, provide a structure), leveraging your interviewer to collect the data and test your assumptions.

This is known as a “candidate-led” case interview and is used by Bain, BCG and other firms.

However, a McKinsey case interview - especially in the first round - is slightly different, with the interviewer controlling the pace and direction of the conversation much more than with other case interviews.

At McKinsey, your interviewer will ask you a set of pre-determined questions, regardless of your initial structure. For each question, you will have to understand the problem, come up with a mini structure, ask for additional data (if necessary) and come to the conclusion that answers the question.

McKinsey’s cases are thus referred to as “interviewer-led”. This more structured format of case also shows up in online cases by other firms - notably including BCG’s Casey chatbot (with the amusing result that practising McKinsey-style cases can be a great addition when prepping for BCG).

Essentially, these interviewer-led case studies are large cases made up of lots of mini-cases. You still use basically the same method as you would for standard (or candidate-led) cases - the main difference is simply that, instead of using that method to solve one big case, you are solving several mini-cases sequentially.

2.5.2. The McKinsey PEI

McKinsey brands its fit aspect of interviews as the Personal Experience Interview or PEI. Despite the different name, this is really much the same interview you will be going up against in Bain, BCG and any similar firms.

McKinsey does have a reputation for pushing candidates a little harder with fit or PEI questions, focusing on one story per interview and drilling down further into the specific details each time. We discuss this tendency more in our fit interview article. However, no top end firm is going to go easy on you and you should absolutely be ready for the same level of grilling at Bain, BCG and others. Thus any difference isn’t hugely salient in terms of prep.

2.6. How are things changing in 2023?

For the foreseeable future, you are going to have to go through multiple live case interviews to secure any decent consulting job. These might increasingly happen via Zoom rather than in person, but they should remain largely the same otherwise.

However, things are changing and the rise of AI in recent months seems pretty much guaranteed to accelerate existing trends.

Even before the explosive development of AI chatbots like ChatGPT we have seen in recent months, automation was already starting to change the recruitment process.

As we mentioned, case interviews are expensive and inconvenient for firms to run. Ideally, then, firms will try to reduce the number of interviews required for recruitment as far as possible. For many years, tests of various kinds served to cut down the applicant pool and thus the number of interviews. However, these tests had a limited capacity to assess candidates against the full consulting skillset in the way that case interviews do so well.

More recently, though, the development of online testing has allowed for more and more advanced assessments. Top consulting firms have been leveraging screening tests that better and better capture the same skillset as case interviews. Eventually this is converging on automated case studies. We see this very clearly with the addition of the Redrock case to McKinsey’s Solve assessment.

As these digital cases become closer to the real thing, the line between test and interview blurs. Online cases don’t just reduce the number of candidates to interview, but start directly replacing interviews.

Case in point here is BCG’s Casey chatbot . Previously, BCG had deployed less advanced online cases and similar tests to weed out some candidates before live case interviews began. Now, though, Casey actually replaces one first round case interview.

Casey, at time of writing, is still a relatively “dumb” chatbot, basically running through a pre-set script. The Whatsapp-like interface does a lot of work to make it feel like one is chatting to a “real person” - the chatbot itself, though, cannot provide feedback or nudges to candidates as would a human interviewer.

We fully expect that, as soon as BCG and other firms can train a truer AI, these online cases will become more widespread and start replacing more live interviews.

We discuss the likely impacts of advanced AI on consulting recruitment and the industry more broadly in our blog.

Here, though, the real message is that you should expect to run into digital cases as well as traditional case interviews.

Luckily, despite any changes in specific format, you will still need to master the same fundamental skills and prepare in much the same way.

We’ll cover a few ways to help prepare for chatbot cases in section four. Ultimately, though, firms are looking for the same problem solving ability and mindset as a real interviewer. Especially as chatbots get better at mimicking a real interviewer, candidates who are well prepared for case cracking in general should have no problem with AI administered cases.

2.6.1. Automated fit interviews

Analogous to online cases, in recent years there has been a trend towards automated, “one way” fit interviews, with these typically being administered for consultancies by specialist contractors like HireVue or SparkHire.

These are kind of like Zoom interviews, but if the interviewer didn’t show up. Instead you will be given fit questions to answer and must record your answer in your computer webcam. Your response will then go on to be assessed by an algorithm, scoring both what you say and how you say it.

Again, with advances in AI, it is easy to imagine these automated interviews going from fully scripted interactions, where all candidates are asked the same list of questions, to a more interactive experience. Thus, we might soon arrive at a point where you are being grilled on the details of your stories - McKinsey PEI style - but by a bot rather than a human.

We include some tips on this kind of “one way” fit interview in section six here.

3. What do I need to learn to solve cases?

If you’re new to case cracking. You might feel a bit hopeless when you see a difficult case question, not having any idea where to start.

In fact though, cracking cases is much like playing chess. The rules you need to know to get started are actually pretty simple. What will make you really proficient is time and practice.

In this section, we’ll run through a high level overview of everything you need to know, linking to more detailed resources at every step.

3.1. Business fundamentals

Obviously, you are going to need to be familiar with basic business concepts in order to understand the case studies you are given in the first instance.

If you are coming from a business undergrad, an MBA or are an experienced hire, you might well have this covered already.

However, many consultants will be entering from engineering or similar backgrounds and the major consulting firms are hiring more and more PhDs and non-MBA master's graduates from all subjects. These individuals will need to get up to speed on business fundamentals.

Luckily, you don’t need a degree-level understanding of business to crack interview cases, and a lot of the information you will pick up by osmosis as you read through articles like this and go through cases.

However, some things you will just need to sit down and learn. We cover everything you need to know in some detail in our Case Academy course. However, some examples here of things you need to learn are:

  • Basic accounting (particularly how to understand all the elements of a balance sheet)
  • Basic economics
  • Basic marketing
  • Basic strategy

Note, though, that learning the very basics of business is the beginning rather than the end of your journey.

Once you are able to “speak business” at a rudimentary level, you should try to “become fluent” and immerse yourself in reading/viewing/listening to as wide a variety of business material as possible, getting a feel for all kinds of companies and industries - and especially the kinds of problems that can come up in each context and how they are solved.

The material put out by the consulting firms themselves is a great place to start, but you should also follow the business news and find out about different companies and sectors as much as possible between now and interviews. Remember, if you’re going to be a consultant, this should be fun rather than a chore!

3.2. How to solve cases like a real consultant

This is the really important bit.

If you look around online for material on how to solve case studies, a lot of what you find will set out framework-based approaches. However, as we have mentioned, these frameworks tend to break down with more complex, unique cases - with these being exactly the kind of tough case studies you can expect to be given in your interviews.

To address this problem, the MyConsultingCoach team has developed a new, proprietary approach to case cracking that replicates how top management consultants approach actual engagements.

MyConsultingCoach’s Problem Driven Structure approach is a universal problem solving method that can be applied to any business problem , irrespective of its nature.

As opposed to just selecting a generic framework for each case, the Problem Driven Structure approach works by generating a bespoke structure for each individual question and is a simplified version of the roadmap McKinsey consultants use when working on engagements.

The canonical seven steps from McKinsey on real projects are simplified to four for case interview questions, as the analysis required for a six-month engagement is somewhat less than that needed for a 45-minute case study. However, the underlying flow is the same.

This video has more information on how frameworks can be unreliable and how we address this problem:

Otherwise, let's zoom in to see how our method actually works in more detail:

3.2.1. Identify the problem

Identifying the problem means properly understanding the prompt/question you are given, so you get to the actual point of the case.

This might sound simple, but cases are often very tricky, and many candidates irretrievably mess things up within the first few minutes of starting. Often, they won’t notice this has happened until they are getting to the end of their analysis. Then, they suddenly realise that they have misunderstood the case prompt - and have effectively been answering the wrong question all along!

With no time to go back and start again, there is nothing to do. Even if there were time, making such a silly mistake early on will make a terrible impression on their interviewer, who might well have written them off already. The interview is scuppered and all the candidate’s preparation has been for nothing.

This error is so galling as it is so readily avoidable.

Our method prevents this problem by placing huge emphasis on a full understanding of the case prompt. This lays the foundations for success as, once we have identified the fundamental, underlying problem our client is facing, we focus our whole analysis around finding solutions to this specific issue.

Now, some case interview prompts are easy to digest. For example, “Our client, a supermarket, has seen a decline in profits. How can we bring them up?”. However, many of the prompts given in interviews for top firms are much more difficult and might refer to unfamiliar business areas or industries. For example, “How much would you pay for a banking license in Ghana?” or “What would be your key areas of concern be when setting up an NGO?”

Don’t worry if you have no idea how you might go about tackling some of these prompts!

In our article on identifying the problem and in our full lesson on the subject in our MCC Academy course, we teach a systematic, four step approach to identifying the problem , as well as running through common errors to ensure you start off on the right foot every time!

This is summarised here:

Four Steps to Identify the Problem

Following this method lets you excel where your competitors mess up and get off to a great start in impressing your interviewer!

3.2.2. Build your problem driven structure

After you have properly understood the problem, the next step is to successfully crack a case is to draw up a bespoke structure that captures all the unique features of the case.

This is what will guide your analysis through the rest of the case study and is precisely the same method used by real consultants working on real engagements.

Of course, it might be easier here to simply roll out one an old-fashioned framework, and a lot of candidates will do so. This is likely to be faster at this stage and requires a lot less thought than our problem-driven structure approach.

However, whilst our problem driven structure approach requires more work from you, our method has the advantage of actually working in the kind of complex case studies where generic frameworks fail - that is exactly the kind of cases you can expect at an MBB interview .

Since we effectively start from first principles every time, we can tackle any case with the same overarching method. Simple or complex, every case is the same to you and you don’t have to gamble a job on whether a framework will actually work

In practice, structuring a problem with our method means drawing up either an issue tree or an hypothesis tree , depending on how you are trying to address the problem.

These trees break down the overall problem into a set of smaller problems that you can then solve individually. Representing this on a diagram also makes it easy for both you and your interviewer to keep track of your analysis.

To see how this is done, let’s look at the issue tree below breaking down the revenues of an airline:

Frame the Airline Case Study

These revenues can be segmented as the number of customers multiplied by the average ticket price. The number of customers can be further broken down into a number of flights multiplied by the number of seats, times average occupancy rate. The node corresponding to the average ticket price can then be segmented further.

It is worth noting that the same problem can be structured in multiple valid ways by choosing different means to segment the key issues.

That said, not all valid structures are equally useful in solving the underlying problem. A good structure fulfils several requirements - including MECE-ness , level consistency, materiality, simplicity, and actionability. It’s important to put in the time to master segmentation, so you can choose a scheme isn’t only valid, but actually useful in addressing the problem.

After taking the effort to identify the problem properly, an advantage of our method is that it will help ensure you stay focused on that same fundamental problem throughout. This might not sound like much, but many candidates end up getting lost in their own analysis, veering off on huge tangents and returning with an answer to a question they weren’t asked.

Another frequent issue - particularly with certain frameworks - is that candidates finish their analysis and, even if they have successfully stuck to the initial question, they have not actually reached a definite solution. Instead, they might simply have generated a laundry list of pros and cons, with no clear single recommendation for action.

Clients employ consultants for actionable answers, and this is what is expected in the case interview. The problem driven structure excels in ensuring that everything you do is clearly related back to the key question in a way that will generate a definitive answer. Thus, the problem driven structure builds in the hypothesis driven approach so characteristic of real consulting practice.

You can learn how to set out your own problem driven structures in our article here and in our full lesson in the MCC Academy course.

Join thousands of other candidates cracking cases like pros

3.2.3. lead the analysis.

A problem driven structure might ensure we reach a proper solution eventually, but how do we actually get there?

We call this step " leading the analysis ", and it is the process whereby you systematically navigate through your structure, identifying the key factors driving the issue you are addressing.

Generally, this will mean continuing to grow your tree diagram, further segmenting what you identify as the most salient end nodes and thus drilling down into the most crucial factors causing the client’s central problem.

Once you have gotten right down into the detail of what is actually causing the company’s issues, solutions can then be generated quite straightforwardly.

To see this process in action, we can return to our airline revenue example:

Lead the analysis for the Airline Case Study

Let’s say we discover the average ticket price to be a key issue in the airline’s problems. Looking closer at the drivers of average ticket price, we find that the problem lies with economy class ticket prices. We can then further segment that price into the base fare and additional items such as food.

Having broken down the issue to such a fine-grained level, solutions occur quite naturally. In this case, we can suggest incentivising the crew to increase onboard sales, improving assortment in the plane, or offering discounts for online purchases.

Our article on leading the analysis is a great primer on the subject, with our video lesson in the MCC Academy providing the most comprehensive guide available.

3.2.4. Provide recommendations

So you have a solution - but you aren’t finished yet!

Now, you need to deliver your solution as a final recommendation.

This should be done as if you are briefing a busy CEO and thus should be a one minute, top-down, concise, structured, clear, and fact-based account of your findings.

The brevity of the final recommendation belies its importance. In real life consulting, the recommendation is what the client has potentially paid millions for - from their point of view, it is the only thing that matters.

In an interview, your performance in this final summing up of your case is going to significantly colour your interviewer’s parting impression of you - and thus your chances of getting hired!

So, how do we do it right?

Barbara Minto's Pyramid Principle elegantly sums up almost everything required for a perfect recommendation. The answer comes first , as this is what is most important. This is then supported by a few key arguments , which are in turn buttressed by supporting facts .

Across the whole recommendation, the goal isn’t to just summarise what you have done. Instead, you are aiming to synthesize your findings to extract the key "so what?" insight that is useful to the client going forward.

All this might seem like common sense, but it is actually the opposite of how we relay results in academia and other fields. There, we typically move from data, through arguments and eventually to conclusions. As such, making good recommendations is a skill that takes practice to master.

We can see the Pyramid Principle illustrated in the diagram below:

The Pyramid principle often used in consulting

To supplement the basic Pyramid Principle scheme, we suggest candidates add a few brief remarks on potential risks and suggested next steps . This helps demonstrate the ability for critical self-reflection and lets your interviewer see you going the extra mile.

The combination of logical rigour and communication skills that is so definitive of consulting is particularly on display in the final recommendation.

Despite it only lasting 60 seconds, you will need to leverage a full set of key consulting skills to deliver a really excellent recommendation and leave your interviewer with a good final impression of your case solving abilities.

Our specific article on final recommendations and the specific video lesson on the same topic within our MCC Academy are great, comprehensive resources. Beyond those, our lesson on consulting thinking and our articles on MECE and the Pyramid Principle are also very useful.

3.3. Common case types and the building blocks to solve them

You should tackle each new case on its own merits. However, that’s not to say there aren’t recurring themes that come up fairly reliably in cases - there absolutely are. Business is business and case studies will often feature issues like profitability, competition etc.

Old fashioned framework approaches would have you simply select a defined framework for each kind of case and, in effect, just run the algorithm and wait for a solution to fall out.

We’ve already explained how frameworks can let you down. In this context, too many candidates will fall into the trap of selecting a framework for that case type that simply won’t work for their specific case.

The counterpoint in favour of frameworks, though, is that they are at least fast and prevent you having to start from the ground up with a common kind of case.

Ideally, you should have the best of both worlds - and this is why, in our articles on this site and in our MCC Academy course, we have developed a set of “building bocks” for common case themes.

As they name suggests, building blocks give you modular components for different kinds of case to help build out your own custom structures faster. These then allow you to leverage the symmetries between cases without inheriting the inflexibility of frameworks.

Let’s take a look at five different case types and get a brief idea of how our building block approach helps you with each. You can find more detail on each in the full length articles linked, as well as in the full-length video lessons in our MCC Academy course.

3.3.1. Estimation

Consultants need to push forward to provide definitive recommendations to clients in a timely manner despite typically not having access to full information on a problem. Estimation of important quantities is therefore at the heart of real life consulting work.

Estimation is thus just as fundamental to case cracking.

A case interview might centre on an estimation question, and this might be quite common for a first round interview. However, estimation is also very likely to be a crucial part of pretty well any other kind of case question you receive is likely to include estimation as a crucial component of your analysis.

The kinds of estimation you might be asked to make in a case interview can be very daunting:

  • How many bank branches are there in Italy?
  • How many cars are sold in Berlin in one year?
  • How many people will buy the latest high-tech smartphone on the market?

You might have no idea where to begin with these examples. However, tempting as it might be, your answer cannot ever be a simple guess .

A decent estimation does have a guessed element - though this should really be an educated guess based on some pre-existing knowledge. However, this guessed element is always then combined with a rigorous quantitative method to arrive at a reasonable estimation.

In context of a case interview, it’s important to realise that your interviewer doesn’t really care about the right answer (they don’t need to ask you to find out, after all). What’s important is showing the rational process by which you get to your answer.

A guess that was somehow exactly correct is no good compared to a “wrong” answer that was reached by a very sensible, intelligent process of estimation. In cases, this method will often be a matter of segmentation.

So, where would we start in working out how many cars are sold in Berlin, for example?

The key to estimation case questions is the ability to logically break down the problem into more manageable pieces. In consulting case studies, this will generally mean segmenting a wider population to find a particular target group. For example, starting from the total population of Berlin and narrowing down to the cohort of individuals who will buy a car that year.

There are usually many ways to segment the same starting population, and several different segmentation schemes might be equally valid. However, it is crucial to choose the specific method best suited to the goal in answering the question and allowing you to best leverage the data you have available.

Segmentation must be allied with assumptions in order to arrive at an estimation. These assumptions are the “guessed” element of estimations we mentioned above. Assumptions cannot just be plucked from thin air, but must always be reasonable .

The example below showcases both the segmentation and assumptions made in an estimation of the size of the wedding planning market in London:

Estimation Example Structure

Our articles on estimation and the MECE concept are great starting points in getting to grips with consulting estimation. However, the best place to learn how to make estimations is with the dedicated building block video lesson in our MCC Academy course.

Those of you from physics or engineering backgrounds will probably see a lot in common with Fermi questions . We have plenty of estimation cases for you to work through in our free case library. However, Fermi questions are a great way of getting a little extra practice and you can find a lifetime’s supply online.

3.3.2. Profitability

The fundamental goal of any normal business is to maximise profits - nobody is getting up and going to work to lose money. Even Silicon Valley tech start-ups are supposed to be profitable some day!

Profitability problems are thus bread and butter issues for management consultants.

Clients often tell consultants broadly the same story. The business was doing in well in recent years, with strong profits. However, some recent turn of events has upset the status quo and led to concerns around profit levels. Consultants are brought in as businesses are often sufficiently complex that it can be difficult to figure out precisely where and why the company is losing money - let alone how to then reverse the situation and restore healthy profits.

Despite steady growth in customer flow, the Walfort supermarket chain has seen falling profits in the past year. What is the reason for this decline?

Understanding profitability ultimately means understanding the various components that determine a company’s profit. You will need to learn to decompose profit first into revenues and costs (profit being the synthesis of these two factors). Crucially, you then need to segment further, distinguishing different specific revenue streams and separating various fixed and variable costs.

To take an example, just examining the revenue side of profit, the incoming revenues for an insurance firm might be broken down as follows:

Insurance Revenues

Improving profitability will inherently mean increasing revenues and/or decreasing costs. To solve profitability problems, we thus have to understand the ways we can minimise different costs, as well as ways to drive sales and/or optimise pricing to increase revenue. Importantly, you must be able to judge which of these options is best suited to address specific scenarios.

The key to tackling the complex kind of profitability questions given by MBB-level consultancies lies in this proper segmentation.

By contrast, old-fashioned case interview frameworks will simply have you look at aggregate cost and revenue data before recommending generic cost-cutting or revenue-driving measures. However, this will often lead to negative outcomes in more involved cases, making matters worse for the client.

For example, it might well be that a company actually makes a loss when it serves a certain cohort of customers. An airline, for instance, might lose money on economy class customers but make a healthy profit on each business class customer. Attempts to boost revenue by increasing sales across the board might actually reduce profit further by increasing the number of economy class customers. What is required is targeted measures to increase focus on business class and/or mitigate economy class losses.

You can start learning to segment these kinds of cases properly in our article on profitability , whilst the best way to really master profitability questions is our full lesson on the subject in the Building Blocks section of our MCC Academy course.

3.3.3. Pricing

For a company to be profitable at all, it is a pre-requisite that it charges the right price for whatever it sells. However, establishing what price to charge for any one product - or indeed a whole suite of related products - can be a highly complex business.

Consultants are often engaged to negotiate the many variables, with all their complex interdependencies, at play in pricing. Correspondingly, then, pricing is a common theme in case interviews.

  • A company launches a new smartphone with a significantly improved camera. How much should they charge?
  • A doughnut chain wants to start selling coffee in their shops. How much should they charge per cup?

Clearly, lot of different factors can influence the answers to these questions, and it can be difficult to know where to start. To get a handle on all this complexity, you will need to take a methodical, structured approach.

To really understand pricing, you must begin from fundamentals like the customer’s willingness to pay, the value captured by the company, and the value created for the customer. These basics are shown in the diagram below:

Pricing Basics

This might seem simple enough, but the exact level at which prices are ultimately set is determined by a whole host of factors, including product availability, market trends, and the need to maintain a competitive position within the market. In particular, if we are changing the price of an existing product, we must consider how the price elasticity of demand might cause sales to fluctuate.

Our four-step method for pricing starts from establishing the customer’s next best alternative, calculating the value added by our own product, and working from there. A summary of this method is given, along with an overview of pricing in general, in our article on the subject . However, the most complete resource is our pricing lesson in the MCC Academy .

3.3.4. Valuation

Valuation is fundamental to any kind of investment. Before allocating capital towards a particular opportunity, an investor must understand precisely what value it holds and how this compares to the other available options.

In short, valuation tells us how much we should be willing to pay to acquire a company or an asset.

There are many ways to value an asset - indeed the finer points are still subject to research in both the academic and private sectors.

Standard ways to assign value include asset-based valuations (notably the Net Asset Value or NAV) and the various multiples so widely used by market traders.

However, in consulting case interviews, you will only usually need to be familiar with Net Present Value (NPV) . This means you need to learn and master the NPV equation:

NPV Equation

CF = Cash Flow r = Discount Rate

Whilst this is a pretty simple equation on the face of it, in order to make proper use of it, you will also need to develop a feel for interest/discount rates appropriate to different cases. This will be essential, as you will often have to estimate rational values for these rates for different investments before plugging those values into the NPV equation. Our Case Academy course has more detail here.

Note, though, that NPV is only really half the story.

NPV provides a kind of “absolute” value for an asset. However, the fact is that the worth of any asset will be different for different buyers , depending largely upon what the buyer already owns. In just the same way a spare clutch for a 1975 Ford will be a lot less valuable to a cyclist than to someone restoring the relevant classic car, so a courier business will be more valuable to an online retailer than to an airline.

As such, what we call the Total Enterprise Value (TEV) of an asset is calculated as a function of that asset’s NPV and of the potential cost and revenue synergies resulting from an acquisition. This is shown in the useful structure below:

TEV

You can learn more about all aspects of valuation in our article here , as well as in our dedicated video lesson in MCC Academy . These include guides to the kind of interest rates typically required to finance different kinds of investment.

3.3.5. Competitive Interactions

Most of what we’ve discussed so far in terms of case themes and our building block approach to them will all depend upon the prevailing competitive landscape our client exists within. Product prices, profit levels and ultimately valuations can all change over time in response to competition.

What is more, the zero sum dynamics of competitive interactions mean that these things can change quickly .

Companies enjoying near monopolies for years or even decades can quickly see their values go to zero, or near enough, in the face of some innovation by a competitor coming onto the market.

Nokia and Kodak thoroughly dominated the mobile phone and photography markets respectively - until new companies with new products pulled the rug out from under them and led to precipitous collapses.

New market entrants or old competitors with new ideas can throw a company’s whole business model up in the air overnight . Complex decisions about profound changes need to be made yesterday. Firms trying to save themselves will often slash prices in attempts to maintain sales - though this can actually make things worse and result in a corporate death-spiral. Consultants are then frequently called in to help companies survive - with this type of engagement carrying over to inform case interview questions.

You are running an airline and a low-cost competitor, like Ryanair, decides to start operating on your routes. You are rapidly losing customers to their lower fares. How do you respond?

Your eventual solutions to competitive interaction problems will likely need to be novel and unique to the situation. However, the process by which we understand competitive interactions and move towards those solutions is usually very methodical, moving through the limited dimensions in which a company can take action.

The following structure neatly encodes the general options open to responding to new sources of competition:

Competitive Interaction Structure

Of course, we would never suggest that you blanket-apply any strict, inflexible methodology to a whole swathe of case questions – this is precisely the approach that causes so much trouble for candidates using old-fashioned frameworks.

This structure is only a starting point - a shortcut to a bespoke framework specific to the case question in hand. You might well have to alter the details of the structure shown and you will almost certainly have to expand it as you lead the analysis . How you build out your structure and the solutions you provide are necessarily going to depend upon the specific details of the case question.

Thus, in order to deal with competitive interactions, you will need to put in the time to understand how the different strategies available function - as well as how competitors might then react to implementing such strategies. With enough practice, though, soon you won’t be fazed by even the most complex cases of competition between firms.

You can learn more in our article here and in our dedicated video lesson on competitive interaction in the MCC Academy case interview course.

3.4. Mental mathematics

Almost every interview case study will feature some mental mathematics and this is an area where many many candidates let themselves down.

As such, it makes sense to out in the time and make sure you are fully proficient.

Nothing beyond high school level is required, but you probably don’t do much mental arithmetic day to day and will likely need to practice quite a lot to get good enough to reliably perform at pace, under pressure.

We give a high-level overview of what you need to know in our consulting math article , but devote a whole section of our MCC Academy course to a deep dive on consulting math, with plenty of practice material to get you up to scratch.

4. How do I practice for case interviews?

As we said above - case interviews are much like chess. The rules are relatively quick to learn, but you need to practice a lot to get good.

If you’re working through our MCC Academy course, we recommend getting through the core Problem Driven Structure section. After that, you should be practising alongside working through the remainder of the course and beyond. However you do things, you need to get up to speed with the fundamentals before practice is going to do much more than confuse you.

Of course, if you’re enrolled in one of our mentoring programmes , your mentor will let you know precisely when and how you should be scheduling practice, as well as tracking your progress throughout.

4.1. Solo Practice

For solitary preparation, one of the best uses of your time is to work on your mental mathematics . This skill is neglected by many applicants - much to their immediate regret in the case interview. Find our mental math tool here or in our course, and practice at least ten minutes per day, from day one until the day before the interview.

Once you've covered our Building Blocks section, you should then start working through the cases in My Consulting Coach's case bank alongside your work on the course. This is a large library of case interview questions and answers in different formats and difficulties.

To build your confidence, start out on easier case questions, work through with the solutions, and don't worry about time. As you get better, you can move on to more difficult cases and try to get through them more quickly. You should practice around eight case studies on your own to build your confidence.

4.2. Peer practice

One you have worked through eight cases solo, you should be ready to simulate the interview more closely and start working with another person.

Here, many candidates turn to peer practice - that is, doing mock case interviews with friends, classmates or others also applying to consulting.

If you’re in university, and especially in business school, there will very likely be a consulting club for you to join and do lots of case practice with. If you don’t have anyone to practice, though, or if you just want to get a bit more volume in with others, our free meeting board lets you find fellow applicants from around the world with whom to practice.

4.3. Professional practice

You can do a lot practising by yourself and with peers. However, nothing will bring up your skills so quickly and profoundly as working with a real consultant.

Perhaps think about it like boxing. You can practice drills and work on punch bags all you want, but at some point you need to get into the ring and do some actual sparring if you ever want to be ready to fight.

Of course, it isn’t possible to secure the time of experienced top-tier consultants for free. However, when considering whether you should invest to boost your chances of success, it is worth considering the difference in your salary over even a just few years between getting into a top-tier firm versus a second-tier one. In the light of thousands in increased annual earnings (easily accumulating into millions over multiple years), it becomes clear that getting expert interview help really is one of the best investments you can make in your own future.

Should you decide to make this step, MyConsultingCoach can help, offering the highest quality case interview coaching service available . Each MCC case coach is selected as an MBB consultant with two or more years of experience and strong coaching expertise.

Case interview coaching is hugely beneficial in itself. However, for those who want to genuinely maximise their chances of securing a job offer - and especially for time-poor, busy professionals or hard-pressed students who want to take the guesswork and wasted time out of their case interview prep - we also offer a much more comprehensive service .

With one of our bespoke mentoring programmes , you are paired with a 5+ year experienced, ex-MBB mentor of your choosing, who will then oversee your whole case interview preparation from start to finish - giving you your best possible chance of landing a job!

4.4. Practice for online cases

Standard preparation for interview case studies will carry directly over to online cases.

However, if you want to do some more specific prep, you can work through cases solo to a timer and using a calculator and/or Excel (online cases generally allow calculators and second computers to help you, whilst these are banned in live case interviews).

Older PST-style questions also make great prep, but a particularly good simulation is the self-assessment tests included in our Case Academy course . These multiple choice business questions conducted with a strict time limit are great preparation for the current crop of online cases.

5. Fit interviews

As we’ve noted, even something billed as a case interview is very likely to contain a fit interview as a subset.

We have an article on fit interviews and also include a full set of lessons on how to answer fit questions properly as a subset of our comprehensive Case Academy course .

Here though, the important thing to convey is that you take preparing for fit questions every bit as seriously as you do case prep.

Since they sound the same as you might encounter when interviewing for other industries, the temptation is to regard these as “just normal interview questions”.

However, consulting firms take your answers to these questions a good deal more seriously than elsewhere.

This isn’t just for fluffy “corporate culture” reasons. The long hours and close teamwork, as well as the client-facing nature of management consulting, mean that your personality and ability to get on with others is going to be a big part of making you a tolerable and effective co-worker.

If you know you’ll have to spend 14+ hour working days with someone you hire and that your annual bonus depends on them not alienating clients, you better believe you’ll pay attention to their character in interview.

There are also hard-nosed financial reasons for the likes of McKinsey, Bain and BCG to drill down so hard on your answers.

In particular, top consultancies have huge issues with staff retention. The average management consultant only stays with these firms for around two years before they have moved on to a new industry.

In some cases, consultants bail out because they can’t keep up with the arduous consulting lifestyle of long hours and endless travel. In many instances, though, departing consultants are lured away by exit opportunities - such as the well trodden paths towards internal strategy roles, private equity or becoming a start-up founder.

Indeed, many individuals will intentionally use a two year stint in consulting as something like an MBA they are getting paid for - giving them accelerated exposure to the business world and letting them pivot into something new.

Consulting firms want to get a decent return on investment for training new recruits. Thus, they want hires who not only intend to stick with consulting longer-term, but also have a temperament that makes this feasible and an overall career trajectory where it just makes sense for them to stay put.

This should hammer home the point that, if you want to get an offer, you need to be fully prepared to answer fit questions - and to do so excellently - any time you have a case interview.

6. Interview day - what to expect, with tips

Of course, all this theory is well and good, but a lot of readers might be concerned about what exactly to expect in real life . It’s perfectly reasonable to want to get as clear a picture as possible here - we all want to know what we are going up against when we face a new challenge!

Indeed, it is important to think about your interview in more holistic terms, rather than just focusing on small aspects of analysis. Getting everything exactly correct is less important than the overall approach you take to reasoning and how you communicate - and candidates often lose sight of this fact.

In this section, then, we’ll run through the case interview experience from start to finish, directing you to resources with more details where appropriate. As a supplement to this, the following video from Bain is excellent. It portrays an abridged version of a case interview, but is very useful as a guide to what to expect - not just from Bain, but from McKinsey, BCG and any other high-level consulting firm.

6.1. Getting started

Though you might be shown through to the office by a staff member, usually your interviewer will come and collect you from a waiting area. Either way, when you first encounter them, you should greet your interviewer with a warm smile and a handshake (unless they do not offer their hand). Be confident without verging into arrogance. You will be asked to take a seat in the interviewer’s office, where the interview can then begin.

6.1.1. First impressions

In reality, your assessment begins before you even sit down at your interviewer’s desk. Whether at a conscious level or not, the impression you make within the first few seconds of meeting your interviewer is likely to significantly inform the final hiring decision (again, whether consciously or not).

Your presentation and how you hold yourself and behave are all important. If this seems strange, consider that, if hired, you will be personally responsible for many clients’ impressions of the firm. These things are part of the job! Much of material on the fit interview is useful here, whilst we also cover first impressions and presentation generally in our article on what to wear to interview .

As we have noted above, your interview might start with a fit segment - that is, with the interviewer asking questions about your experiences, your soft skills, and motivation to want to join consulting generally and that firm in particular. In short, the kinds of things a case study can’t tell them about you. We have a fit interview article and course to get you up to speed here.

6.1.2. Down to business

Following an initial conversation, your interviewer will introduce your case study , providing a prompt for the question you have to answer. You will have a pen and paper in front of you and should (neatly) note down the salient pieces of information (keep this up throughout the interview).

It is crucial here that you don’t delve into analysis or calculations straight away . Case prompts can be tricky and easy to misunderstand, especially when you are under pressure. Rather, ask any questions you need to fully understand the case question and then validate that understanding with the interviewer before you kick off any analysis. Better to eliminate mistakes now than experience that sinking feeling of realising you have gotten the whole thing wrong halfway through your case!

This process is covered in our article on identifying the problem and in greater detail in our Case Academy lesson on that subject.

6.1.3. Analysis

Once you understand the problem, you should take a few seconds to set your thoughts in order and draw up an initial structure for how you want to proceed. You might benefit from utilising one or more of our building blocks here to make a strong start. Present this to your interviewer and get their approval before you get into the nuts and bolts of analysis.

We cover the mechanics of how to structure your problem and lead the analysis in our articles here and here and more thoroughly in the MCC Case Academy . What it is important to convey here, though, is that your case interview is supposed to be a conversation rather than a written exam . Your interviewer takes a role closer to a co-worker than an invigilator and you should be conversing with them throughout.

Indeed, how you communicate with your interviewer and explain your rationale is a crucial element of how you will be assessed. Case questions in general, are not posed to see if you can produce the correct answer, but rather to see how you think . Your interviewer wants to see you approach the case in a structured, rational fashion. The only way they are going to know your thought processes, though, is if you tell them!

To demonstrate this point, here is another excellent video from Bain, where candidates are compared.

Note that multiple different answers to each question are considered acceptable and that Bain is primarily concerned with the thought processes of the candidate’s exhibit .

Another reason why communication is absolutely essential to case interview success is the simple reason that you will not have all the facts you need to complete your analysis at the outset. Rather, you will usually have to ask the interviewer for additional data throughout the case to allow you to proceed .

NB: Don't be let down by your math!

Your ability to quickly and accurately interpret these charts and other figures under pressure is one of the skills that is being assessed. You will also need to make any calculations with the same speed and accuracy (without a calculator!). As such, be sure that you are up to speed on your consulting math .

6.1.4. Recommendation

Finally, you will be asked to present a recommendation. This should be delivered in a brief, top-down "elevator pitch" format , as if you are speaking to a time-pressured CEO. Again here, how you communicate will be just as important as the details of what you say, and you should aim to speak clearly and with confidence.

For more detail on how to give the perfect recommendation, take a look at our articles on the Pyramid Principle and providing recommendations , as well the relevant lesson within MCC Academy .

6.1.5. Wrapping up

After your case is complete, there might be a few more fit questions - including a chance for you to ask some questions of the interviewer . This is your opportunity to make a good parting impression.

We deal with the details in our fit interview resources. However, it is always worth bearing in mind just how many candidates your interviewers are going to see giving similar answers to the same questions in the same office. A pretty obvious pre-requisite to being considered for a job is that your interviewer remembers you in the first place. Whilst you shouldn't do something stupid just to be noticed, asking interesting parting questions is a good way to be remembered.

Now, with the interview wrapped up, it’s time to shake hands, thank the interviewer for their time and leave the room .

You might have other interviews or tests that day or you might be heading home. Either way, if know that you did all you could to prepare, you can leave content in the knowledge that you have the best possible chance of receiving an email with a job offer. This is our mission at MCC - to provide all the resources you need to realise your full potential and land your dream consulting job!

6.2. Remote and one-way interview tips

Zoom case interviews and “one-way” automated fit interviews are becoming more common as selection processes are increasingly remote, with these new formats being accompanied by their own unique challenges.

Obviously you won’t have to worry about lobbies and shaking hands for a video interview. However, a lot remains the same. You still need to do the same prep in terms of getting good at case cracking and expressing your fit answers. The specific considerations around remote interviews are, in effect, around making sure you come across as effectively as you would in person.

6.2.1. Connection

It sounds trivial, but a successful video interview of any kind presupposes a functioning computer with a stable and sufficient internet connection.

Absolutely don’t forget to have your laptop plugged in, as your battery will definitely let you down mid-interview. Similarly, make sure any housemates or family know not to use the microwave, vacuum cleaner or anything else that makes wifi cut out (or makes a lot of noise, obviously)

If you have to connect on a platform you don’t use much (for example, if it’s on Teams and you’re used to Zoom), make sure you have the up to date version of the app in advance, rather than having to wait for an obligatory download and end up late to join. Whilst you’re at it, make sure you’re familiar with the controls etc. At the risk of being made fun of, don’t be afraid to have a practice call with a friend.

6.2.2. Dress

You might get guidance on a slightly more relaxed dress code for a Zoom interview. However, if in doubt, dress as you would for the real thing (see our article here ).

Either way, always remember that presentation is part of what you are being assessed on - the firm needs to know you can be presentable for clients. Taking this stuff seriously also shows respect for your interviewer and their time in interviewing you.

6.2.3. Lighting

An aspect of presentation that you have to devote some thought to for a Zoom interview is your lighting.

Hopefully, you long ago nailed a lighting set-up during the Covid lockdowns. However, make sure to check your lighting in advance with your webcam - bearing in mind what time if day your interview actually is. If your interview is late afternoon, don’t just check in the morning. Make sure you aren’t going to be blinded from light coming in a window behind your screen, or that you end up with the weird shadow stripes from blinds all over your face.

Natural light is always best, but if there won’t be much of that during your interview, you’ll likely want to experiment with moving some lamps around.

6.2.4. Clarity

The actual stories you tell in an automated “one-way” fit interview will be the same as for a live equivalent. If anything, things should be easier, as you can rattle off a practised monologue without an interviewer interrupting you to ask for clarifications.

You can probably also assume that the algorithm assessing your performance is sufficiently capable that it will be observing you at much the same level as a human interviewer. However, it is probably still worth speaking as clearly as possible with these kinds of interviews and paying extra attention to your lighting to ensure that your face is clearly visible.

No doubt the AIs scoring these interviews are improving all the time, but you still want to make their job as easy as possible. Just think about the same things as you would with a live Zoom interview, but more so.

7. How we can help

There are lots of great free resources on this site to get you started with preparation, from all our articles on case solving and consulting skills to our free case library and peer practice meeting board .

To step your preparation up a notch, though, our Case Academy course will give you everything you need to know to solve the most complex of cases - whether those are in live interviews, with chatbots, written tests or any other format.

Whatever kind of case you end up facing, nothing will bring up your skillset faster than the kind of acute, actionable feedback you can get from a mock case interview a real, MBB consultant. Whilst it's possible to get by without this kind of coaching, it does tend to be the biggest single difference maker for successful candidates.

You can find out more on our coaching page:

Explore Coaching

Of course, for those looking for a truly comprehensive programme, with a 5+ year experienced MBB consultant overseeing their entire prep personally, from networking and applications right through to your offer, we have our mentoring programmes.

You can read more here:

Comprehensive Mentoring

Account not confirmed

A Comprehensive Guide to Case Interview Prep [tips updated 2024]

  • Last Updated January, 2024

Rebecca Smith-Allen

Former McKinsey Engagement Manager

What Are the Best Ways to Prepare for Interviews with Management Consulting Firms?

Congratulations!

If you’re on this page, you’re probably considering a career in management consulting or are already in the middle of the interview process.

We’re here to help.

We’re a team of more than 20 former McKinsey, Bain, and BCG consultants and recruiters (our average time in consulting is 13 years each) and we put together this guide to help you prepare for getting your consulting offer.

After reading this, we hope “congratulations” is also what you’ll hear when you leave your final interviews.

Management Consulting Jobs Are in High Demand

Management consulting jobs are among the most sought-after positions in on-campus recruiting, whether you’re applying as an undergraduate or from a business school. 

Consulting firm recruits also include law school students, Ph.D. program candidates and people who’ve already started their professional careers in other industries.

Management consulting firms are filled with smart, driven people working to solve hard business problems. 

This work is a great launching pad for your career. 

Top consultancies offer competitive salaries and also invest significantly in employee development. A job at a management consulting firm will expose you to multiple different industries and types of business problems. 

There’s a lot to like about a career in consulting!

Competition for Jobs with Top Consulting Firms Is Fierce, so Preparation Is Essential.

But attractive jobs are usually highly competitive, and that’s definitely the case in management consulting. 

Top firms typically make offers to only about 1% of the people who apply. It’s not impossible to get a job with firms like McKinsey, Bain, and BCG (also known as the MBB firms), but it requires preparation.

In particular, successful candidates know that consulting firms use a particular type of interview question — the case study interview — and they know what recruiters are looking for in answers. 

In this article, we’ll help you prepare for management consulting interviews by answering the following questions:

  • What is a case interview?
  • How do I answer a case question?
  • What is the best approach for case interview prep?

We’ll also provide tips and tricks that will help you to ace your case.  

Whether you’re aiming for a job at one of the MBB firms (McKinsey, Bain, or BCG), with other consultancies such as AT Kearney, L.E.K. or Oliver Wyman, or with the consulting arms of the large accounting firms such as Deloitte, Accenture, PwC, Ernst & Young, or KPMG, we can help you get there.  

What Is a Consulting Case Study Interview (also known as the “Case Interview”)?

A Case Study Interview is a real-time problem-solving test used to screen candidates for their ability to succeed in consulting. 

The case is presented as an open-ended question, often a problem that a specific type of business is facing, that an interviewer asks a candidate to solve.

Sample Case Interview Questions

Sales of drinks in Coffee Bean cafes are decreasing. What is causing the sales decrease?

Turnover of store employees at Burgers R’ Us restaurants has increased over prior years. What would you advise the company to do?

Donations to Caring Hands are decreasing, straining the non-profit’s ability to help the families it targets. What should the organization do to turn this around?

Case Interview 101 – The Basics for Beginners

You don’t need an MBA or an undergraduate degree in economics to land a job in consulting. But you will need to learn some business basics to be able to crack case interviews.

This section covers the concepts non-business students need to become familiar with, such as:

  • The income statement – an overview
  • Common formulas used in case interviews
  • Business concepts you need to know
  • Common types of case interviews

Case Interview 101, Part 1: The Income Statement

To solve cases, you first need to understand broadly how companies make money. For any specific case, you’ll want to make sure you understand how that company makes money. 

The most common way companies make money is by selling a product or service for more than it costs to produce, thereby earning a profit . 

Companies use three major financial statements to monitor and report their financial performance: 

(1) The income statement (2) The balance sheet (3) The cash flow statement 

An income statement (or profit and loss statement or statement of revenue and expenses) is a record of a company’s profit or loss over a specific period of time . The profit or loss is calculated by taking the revenues generated and subtracting the expenses incurred over the same period of time. The income statement has 3 major categories: Revenue, Expenses, and Profit or Loss .

Revenue is the total amount of money generated by a company from selling its products or services. It is also referred to as gross sales or “top line” as it sits at the top of the income statement. 

Costs are expenses incurred by a company to make its products or services. In the income statement there are three types of costs: 

  • Costs of goods sold (COGS) or cost of sales are the direct costs of making products or providing a service. For a burger restaurant, for example, the COGS would include things like the meat, bun, and hourly labor of cooks, cashiers, and shift supervisors.
  • Operating expenses are costs that are indirectly tied to the making of products or services. These include selling, general, and administrative (SGA) expenses, management salaries, depreciation, and amortization. Depreciation and amortization are non-cash expenses that reflect the value of big assets like machinery or buildings going down over time. For example, if our burger restaurant buys a grill to cook burgers on for $1,000 and expects it to last for 10 years, it would spread out the cost over that period, $100 per year. Other operating expenses for our burger restaurant would include things like advertising, the rent on the company’s headquarters, and the salary of the CEO.
  • Costs incurred from non-operating activities such as interest paid on loans. These costs are rarely part of case interviews.

Profit or Loss :

Income statements generally show 3 levels of profit (loss) or earnings: Gross Profit; Earnings Before Interest, Tax, Depreciation and Amortization (EBITDA); and Net Profit.

Gross profit or loss

This is calculated by subtracting COGS or the cost of sales from the total revenue generated. If the costs are higher than the revenue generated, then the company has made a loss.

EBITDA and EBIT

EBITDA is calculated by subtracting operating expenses from the gross profit. EBIT is calculated by subtracting depreciation and amortization from EBITDA. 

As mentioned above, depreciation and amortization are non-cash expenses. So if the amount of cash generated by selling a product or service is important to your analysis, you should look at EBITDA. If looking at a more fully loaded cost is the focus of your analysis, use EBIT.

Net Profit or Loss

This is calculated by subtracting interest and tax from EBIT. It is also known as Net Income and refers to the profit (or loss) for the period. This is also known as the “bottom line” as it sits at the bottom of the income statement. This is the ultimate measure of whether a company’s activities are profitable during a certain time period when all costs are considered.  

Case Interview 101, Part 2: Common Formulas Used in Case Interviews

Here is a look at common formulas used in case interviews.

Profitability formula:

The profitability formula is used in profit (or loss) related cases. The profit or loss can be calculated using the following formula:

             Profit (or Loss) = Revenue – Costs

As mentioned above:

  • Revenue is the money generated from selling a product or service. It can be broken down into price per unit and number of units sold . 
  • Costs are the expenses incurred to make the product or service and can be broken down into cost per unit and number of units sold . 

The formula can further be broken down into:

            Profit (or Loss) = (price per unit x number of units sold) – (cost per unit x number of units sold)

There are other ways to break down revenue and cost depending on the case question.

  • Revenue can be broken down by product or service line, customer type, or geographic region (e.g., North American, Europe, Asia)
  • Costs can be broken into fixed costs and variable costs, or components such as overhead, salary, etc.

It is often helpful to break costs down into fixed and variable to solve consulting cases, and understanding the difference is important. Fixed costs, like rent for a store or the cost of equipment, are incurred regardless of how many units a company sells; whereas variable costs are only incurred with the production of each additional unit. Because of this, it can be helpful to sell incremental units even at a loss for a short period of time if it helps cover fixed costs.

So the profitability formula can also be written as:

            Profit (or Loss) = (price per unit x number of units sold) – (fixed + variable costs)

P rofitability example:

Your client, a manufacturer, is facing a decline in profits. Your client wants your help solving this problem. We’ll use this example to demonstrate all the formulas in this section.

The first step you could take is to calculate the past year’s profit given the following information:

  • Number of units sold = 1 million
  • Price per unit = $10
  • Cost per unit = $8

          Profit (or Loss) = ($10 x 1 million) – ($8 x 1 million)

          Profit = $2 million

Profit margin formula:

Profit margin indicates how many cents of profit the company generated for each dollar of sale. It’s typically used to measure the financial health of a company . You can compare the profit margin of a company against its historical margins to evaluate whether its current performance is better or worse than past performance. You can also compare it against companies in the same industry to evaluate whether its financial performance is stronger or weaker.

Profit margin can be calculated using the formula:

          Profit margin = (Profit / Revenue ) *100%

Profit margin example:

To calculate the profit margin, first, you need to calculate company revenues as follows:

            Revenue = 1 million x $10

           Revenue = $ 10 million

You can now calculate the profit margin as follows:

            Profit margin = ($2 million / $10 million) x 100%

           Profit margin = 20%

Note you can combine both the formulas for faster calculation.

Market share formula:

Market share is the size of the company in relation to the size of the industry in which it operates, where size is typically measured in annual revenues. It is used to compare the size of a company to its competitors and the industry as a whole. It can be used in market entry cases because industries with a lot of small competitors are generally easier to enter than ones with only a few big competitors. It’s also used in profitability cases because, in general, companies with a large market share also have more market power to do things like set prices.

Market share can be calculated using the following formula:

            Market share (%) =total company revenue / total industry revenue  

Market share example:

Using the example from above, say you decide to determine the company’s market share as part of your analysis. In this example, the industry has annual revenues of $ 200 million.

            Market share (%) = $ 10 million / $ 200 million

           Market share = 5%

Growth Rate Formula:

This refers to the specific change of a variable within a specific period of time. Growth rates can be used in assessing the financial performance of a company over time. For example, high revenue growth rates would likely be a sign of strong financial performance. High cost growth rates may be a sign that a company is having financial trouble.

The growth rate is calculated using the formula:

            Growth rate (%) = (New – Old) / Old

Growth rate example:

To calculate the manufacturer’s revenue growth rate. Last year’s revenue was $ 9.5 million therefore the revenue growth rate is:

            Revenue growth rate = ($10 million – $9.5 million) / $9.5 million

            Revenue growth rate =5%

You can assess whether a company’s growth rate is strong by comparing it to other growth rates such as:

  • The company’s growth in the prior year.
  • The growth of the market or of competitors.
  • The rate of inflation.

Mature companies are likely to see single-digit growth rates unless they launch a very successful new product or they acquire a company. On the other hand, startup investors typically expect double- or triple-digit annual growth during a company’s early years.

Return on investment formula:

Return on investment (ROI) is a profitability metric that indicates how well an investment performed (or will perform). It can be used to compare the profitability or efficiency of an investment or decide which of alternative investments to make. 

ROI is calculated using the following formula:

            ROI (%) = Profit / Cost of investment

ROI example:

Suppose our manufacturer mentions that they purchased state-of-the-art machinery to make their product. It cost $8 million. You decide to calculate the ROI on this investment. 

            ROI  = $2 million / $8 million

           ROI=25%

Break-even formula:

Break-even is the point at which the total revenue and total costs are equal, meaning there is no loss or profit at that point. Break-even is typically used to help companies determine the minimum number of units that need to be sold to cover all the costs used to produce those units. 

An executive might want to know that they could break even at 100,000 units sold because if she thought they could sell more than that, it would be profitable to enter the market. If she thought they’d sell less, they wouldn’t enter the market.

Break-even can be calculated using the following formula:

              Breakeven (units) = Fixed costs  / (sales price – variable cost per unit)

Break-even example:

If a product required a $50,000 investment in equipment (a fixed cost), sold for $5, and cost $4 per unit in variable costs, its breakeven would be: 

              Breakeven (units) = $50,000  / ($5 – $4)

              Breakeven= 50,000 units

Payback period formula:

Managers may also look at the payback period on an investment or, in other words, how long it would take to earn back the cash required to enter a new business. This investment could be a new piece of equipment or a marketing campaign needed to create customer awareness of a new product. This is a different way of looking at the same question that the breakeven formula asks: is it worth my while to make this investment?

The payback period can be calculated using the following formula:

              Payback (years) = Investment cost / annual profit

Payback years example:

Using the same example, you decided to calculate the payback years of the new state-of-art machinery

            Payback (years)= $8 million / $2 million

           Payback = 4 years

Capacity of equipment:

The capacity of equipment is the maximum output or units a piece of equipment can produce with the available resources over a set period of time.

Capacity can be calculated using the following formula:

            Capacity (units) =Total capacity / Capacity required to make one unit

Capacity example:

To calculate the capacity of our manufacturer’s machinery, we’d need to know that it can produce a unit every 10 minutes and that the client operates 12-hour shifts.

              Capacity (units) = 12 hours x (60 minutes per hour) / 10 minutes

             Capacity = 72 units / day

The utilization rate of equipment:

Utilization rate is the percent of available time the equipment or machinery is actually used. It measures efficiency and can be used by companies to make informed decisions on timelines and inventory, or whether additional equipment is needed.

The utilization rate of equipment can be calculated by the following formula:

              Utilization rate (%) =Actual output / Maximum output

Utilization rate example:

Using the same example, imagine that the management tells you that in a 12-hour shift, the machine produces 50 units and there are two 45-minute breaks.

First, you would need to calculate the potential output.

               Actual hours of operation = 12 hours – 1.5 hours = 10.5 hours

               Potential output = (10.5 hours / 12 hours) x 72 units

               Potential output = 63 units

Then, calculate the utilization rate.

                Utilization rate = 50 units / 63 units

                Utilization rate = 79%

Utilization rates raise interesting issues in a case. It raises questions such as:

  • If potential output is 63 units, why are only 50 being produced (e.g., machine downtime, worker errors), and what can be done to solve these problems?
  • Could the company stagger employee breaks to get potential output up to 72 units from 63?

Case Interview 101, Part 3: Business Concepts You Need to Know

Here are some common business concepts that you need to know as you prepare for your interview.

Process : This is a set of actions or operations that lead to results (products or services). This typically describes how a company makes its products or services. The steps can be performed by workers, equipment, or computers. In a case, this is mostly used in situations where a client would like to make their processes more efficient. For example, a client who is in logistics would like to reduce the cost of its operations by improving the efficiency of its processes, such as by reducing equipment downtime or scheduling deliveries according to time-saving routes. 

Best practices: Best practices are methods or techniques that are considered to be the working standards and guides in a given situation . In a business situation, best practices are used to benchmark companies against the standard and can serve as a roadmap on how to improve the efficiency of their operations.

Hypotheses: Tentative answers to a problem or an assumption based on some evidence. The hypothesis-driven approach is a common approach to solving problems in the consulting world because consultants don’t want to waste time fully researching all possible solutions. They want to move quickly to the most likely answer and then test whether it is or is not the best answer. This approach can be used to solve case interview questions where you first assume an answer to the case problem and check whether this is true or not through analysis. If it is not true, you revise your hypothesis.

Issue tree: This is a common approach in consulting used to solve complex problems . An issue tree is used to break down complex problems into key components in a structured manner. In a case interview, you can use the issue tree to break down the client’s problem into manageable chunks or to break down a formula such as the profitability formula into key components.

Read our article for more information on Issue Trees .

MECE: MECE stands for mutually exclusive and collectively exhaustive . It is a way of bucketing problems, ideas, or solutions with no overlapping between the buckets and with each item having a place in one bucket only (mutually exclusive), and with the buckets including all possible items relevant to the context (collectively exhaustive). In a case interview, you can use MECE with the issue tree when breaking down problems or when identifying solutions for the client. MECE issue trees are considered the gold standard for problem-solving so this concept is very good to know. 

You can also use the concept of MECE when segmenting a market – for example, if you are sizing a market and intend to lay out different purchasing behavior assumptions for different customer segments. For example:

Customer segment                         Purchase frequency for items from coffee shops

Women under 30                             4 times per week, purchase includes food item plus beverage Men under 30                                     2 times per week, purchase includes only beverage Women 31 and over                         4 times per month, purchase includes only beverage Men 31 and over                                 3 times per month, purchase includes only beverage

Note how in this example, everyone would fall into one customer segment and only one customer segment. Read our article for more about MECE problem-solving .

Root causes: This is the core issue or main reason for a problem . It is used in problem-solving to identify solutions that appropriately address the problem. The term root cause is used to distinguish between symptoms of a problem, which may be obvious, and the underlying issue that needs to be solved, which may not be obvious. For example, a decline in sales volume is a symptom. The root cause could be high prices, poor product quality, product unavailability, or any number of other issues. You can’t fix the symptom of declining sales volume until you identify the root cause behind the problem. 

In a case interview, you’ll need to identify possible causes of the client’s problem and then ask questions and do analysis to identify the root cause. Once you do, you can make the most appropriate recommendations for the client.

Break-even analysis: This is the calculation used to determine the point at which the total revenue and total costs are equal meaning there is no loss or profit. In business situations, it helps determine at which point the business, investment, or new product or service will become profitable. In case interviews, you can use the break-even analysis to determine whether a client should make a certain investment, say in machinery or a new product line, based on how likely it is that they’ll exceed the break-even threshold.

Case Interview 101, Part 4: Common Types of Case Interviews

In this section, we will review 4 common types of case interviews.

Market-sizing Questions

Market-sizing questions typically appear in cases where clients want to grow or expand their business such as market entry or profitability cases. The client either wants to understand the market size of the current business or of a potential new product line or geography or customer group to understand whether it is big enough to be interesting. 

Sample case questions

“How many cups of coffee does Starbucks sell in a day?” “Estimate the fleet size of Delta Airlines.” “Estimate market size for air-conditioners in New York.”  “Estimate market size for an anti-smoking pill in the U.S.”

You are not expected to know the exact answer to market-sizing questions. Instead, the interviewer wants to see that you can use simple math and logical deduction to build out an answer. For these questions, it is good to memorize a few facts that will help you make assumptions. For example, a good place to start is the population of the U.S. or the population of a U.S. city (or country and city that you live in). 

For more information and examples, read our article on Market-sizing Cases .

Revenue Growth Case Interviews

In revenue growth cases, the client typically wants to grow their business. This can be done by increasing revenue of the current product/service line, by adding a new product/service line, or by selling to a new type of customer or in a new geography. 

They could do this by building a new offering, buying another company, or partnering (joint venture) with another company that already offers what they want to sell. 

“A manufacturer sees its revenue stagnating. It wants to know whether raising price or selling more units is a better path to growing revenue, and how to pursue it.”

“A local theater house thinks there is an opportunity to expand their current offerings to the very loyal client base. What new product or service could they offer their customers? What would be the impact on revenue from expanding their offerings?”

“A regional fast-food chain, serving hamburgers and fries, is experiencing increasing demand outside of its main regions of operation and wants to expand. What regions would have the biggest impact on its revenue?”

You should remember that there are multiple ways to achieve revenue growth. One thing to consider is the client and industry context when tackling revenue growth questions. For example, does the client have a good market size in the industry? Does the client have the capability to offer new products/services? Is the industry highly competitive?

For more information, read our article on Revenue Growth Cases .

Market Entry Case Interviews

In market entry cases, the client wants to know if they can enter a market and be profitable. For example, entering a different geography, new demography, or new product/service line. (Note, there can be overlap between revenue growth cases and market entry cases.)

“A U.S.-based consumer electronics manufacturer is thinking of expanding into emerging markets. What is the potential revenue growth if they choose to expand into India?”

“A telecom operator is looking to diversify their presence in the U.S. and wants to enter the video streaming market. How can they capture a significant market share?”

“A renewable energy company that specializes in large equipment such as windmills wants to enter the retail market and sell smaller equipment directly to individual homes. They would like to know if this is a good idea.”

There are a number of frameworks you can build off of to tackle a market-entry case. For example, Porter’s Five Forces, Business Situation Framework or 3C&P (customer, competition, company, and product), and Supply & Demand among others. It is key to consider the “new” market context as well as the client context to enter this market. 

To find out more on this, read our article on The Market Entry Framework .

Cost Optimization Case Interviews

Cost optimization cases or questions can be part of a profitability case where a client is experiencing declining profitability or when a client wants to improve efficiency.

“A national hotel chain has seen its operational costs significantly increase over the last year and would like you to figure out why.”

“A juice manufacturer has been experiencing a steady increase in revenue over the past 5 years however their cost has been increasing at a faster rate, meaning the profits have not grown as expected. What is the root cause of the significant increase in cost?”

“A tour company would like to reduce their costs due to the falling number of tourists over the past few years. What ways would you recommend for them to reduce their costs?’

For cost optimization cases, remember to break down the cost components. For example, you can break them down into fixed and variable costs or cost of goods sold and operational costs and then brainstorm the categories of each that will likely apply to the company at hand. This will make it easier to identify what costs should be reduced or eliminated.

Check out Types of Case Interviews article for more detail on these types of cases and more.

Why Do Top Consulting Firms Use Case Interview Questions?

Management consultancies are not the only types of firms that use case interview questions to evaluate candidates. 

Investment banks, consumer marketing companies, and others use the case interview structure in their interview process.

Because case interviews show how a candidate would problem solve in real time. 

Solving complex, ambiguous problems is at the heart at what consultants do every day.

This type of interview question mimics the analytic process a consultant might go through in a 3-month project, but it does it in 30 minutes, the time allowed in a typical interview. 

The interviewer can probe whether a candidate’s approach is well-structured, creative, and displays good business sense.

How Do Consulting Recruiters Evaluate Candidates?

The main thing that recruiters are looking for in case study interviews is whether or not they’d feel comfortable putting a candidate in front of a client. To assess that, they ask themselves these questions:

  • Is this person able to do the job? Do they have the analytic skills to solve tough business problems?
  • Is this person client-ready? Are they knowledgeable, professional, and confident enough to work effectively with client staff and leaders?
  • Is this someone I’d want to work with? This interview question is sometimes referred to as the airport test. It comes down to, “Would I want to be stuck in an airport with this person if the weather was bad and our flight was delayed?” It assesses whether an individual is smart, fun and passionate about the projects they take on.
  • Is this person coachable? No one expects a recruit to know the answer to every thorny business issue right out of undergrad, or even right out of business school, but they do want someone who is willing and able to take suggestions and improve their analysis. Show you are coachable by listening for feedback as you answer a case study interview question and using suggestions to steer you toward the right solution.

Nail the case & fit interview with strategies from former MBB Interviewers that have helped 89.6% of our clients pass the case interview.

Consulting Case Prep Takes Time – So Start Early

If you walk into your first consulting interview without having practiced case study interviews beforehand, you’re in for a painful experience. Case questions can cover any industry and multiple different types of business problems, so you’re unlikely to get lucky and know the answer.

We suggest your start your consulting case prep a few weeks before your interview. Starting with more lead time is even better. This will allow you to watch/read through a few consulting cases to get a sense for what to expect (continue to our case videos below for one example!) It will also give you time to find a couple friends or classmates who are also applying to consulting firms. You can give each other mock case interviews and be even more prepared.

Learn How to Case Quickly by Mastering Each of the 4 Parts of the Case

When you’re starting your consulting interview prep, it’s important to remember that the “right answer” is not simply a conclusion, but the methodical, the well-structured process used to reach the conclusion. 

To answer a case question correctly, you must:

Step 1: Understand the question you are being asked.

After your interviewer describes the client this case interview will involve and the problem they face, you should repeat this information back to them in your own words. 

This can feel awkward when you practice your first case, but it will help you in the long run.

If you don’t have the client and their problem straight, you could spend a lot of time answering the wrong question. If that happens you will not be moving forward to second round interviews no matter how elegant your analysis is.

Example: Our client is a fast-food retailer that has seen decreasing sales revenue over the past couple of years. They want your help in understanding what they can do to improve sales.

Step 2: Take time to think through all the key aspects of the problem.

Ask for a moment to consider your approach to solving the client’s problem. During this time, write down what you want to learn about the client’s situation before you answer the interview question.

Your approach can lean on business frameworks you’re familiar with during your case interview preparation. 

For instance, in the example of a fast-food chain with declining sales, you should break sales down into price and unit volume to understand whether the client is not selling enough units of their products or whether prices have fallen (or both!)

But you don’t need to use familiar frameworks. In fact, it’s best to develop your own structure for breaking down the problem as it shows you can solve a case without forcing a standard framework on the problem.

For more information on business frameworks, you might want to become familiar with during your case study preparation, see  Case Interview Frameworks .

Step 3: Ask pertinent questions and use information from the interviewer to form hypotheses about the problem and explore potential options.

After you brainstorm key aspects of the case problem and structure your approach to solving it, share your approach with your interviewer.

If the interviewer suggests a place to start your analysis, follow their lead.

Otherwise, suggest the best place to start digging into the case.

Make sure the questions you ask the interviewer touch on all the key aspects of the problem you identified including the client’s internal organization, the market for their product, and their competition.

Step 4: Summarize your case interview conclusion in a persuasive manner. 

Once you’re confident you have enough information to understand the case and what needs to be done to solve the client’s business problem, you’ll conclude the interview with a logical summary outlining the problem, key conclusions you’ve reached, and providing a persuasive recommendation on how you’d help the client resolve it.

Below, we’ll go into more depth on how to address each of these 4 points in a case.

Questions You Should Ask Yourself Before Diving Deeper into Case Interview Preparation

Right now, you may be thinking to yourself that consulting interviews sound impossibly difficult. Or you may think that they sound like interesting business problems that you’d enjoy solving. 

Perhaps you’re not sure.

If you think that answering case interviews is not something that would come naturally to you, don’t worry, you’re not alone! 

Getting good at consulting interviews requires a lot of preparation.

Before you commit to putting in the time required to prepare for the management consulting interview process, you should ask yourself if a career in management consulting is right for you.

Key Questions to Ask Yourself Before Pursuing a Career in Consulting

  • Do you enjoy solving the types of business problems asked in case interviews?
  • Do you have a background in business principles or are you willing to invest the time it will take to develop one?
  • Are you passionate about pursuing consulting as a career?

Management consulting jobs might pay well and provide the opportunity to pursue attractive careers, but if you don’t like solving business problems, you probably won’t like the work you’ll do as a consultant. If you don’t enjoy analyzing business cases, save yourself a lot of preparation time and frustration. 

Focus on career options that better meet your interests.

Or, perhaps solving business problems with smart, driven professionals sounds like it’s your dream job. 

If so, move onto the deeper dive into case interview prep below! 

Case Interview Prep – Diving Deeper

If you’re here, we’re assuming you’re serious about investing time in preparing for a career in management consulting. 

The best way to get smarter about  answering case interview questions is to master this four-part approach.

How to Answer a Consulting Case Interview –  a 4 Part Approach to Practice During Interview Prep

The 4 parts to answering a consulting case interview are:

  • Opening  – This is where you make sure you understand the client’s problem.
  • Structure  – This is where you brainstorm all factors relevant to the problem and organize them to ensure you address them in a complete and logical manner.
  • Analysis  – This is where you gather data to identify which of the factors related to the business case are the most important. You’ll use this data to create a recommendation for your client.
  • Conclusion  – Here, you present your recommendation to “the client” (your interviewer), in a well-structured and persuasive manner.

Case Interview Prep Part 1: The Opening

As we saw in the video above, the opening of a case question is a description of a client and the problem they’re facing. Davis repeated back to the interviewer the type of business the client was in and and their business problem.

Remember, this clarification is an important step in the process.

If you did not remember that the client was a top-three beverage producer and answered the question as if the client was a start-up, your answer would ignore the manufacturing and distribution infrastructure the company already had in place to launch its new product.

That would make your answer completely wrong.

During this portion of the interview, you can ask any clarifying questions you need to. If something is not clear—the client’s product or industry, or the problem they want to solve —ask !

Nailing the opening is probably the easiest part of case interview preparation. Get this right, and you’ll start each case off strong.

Case Interview Prep Part 2: Structure

Once Davis clarified the problem, he asked for a moment to prepare her response. In the structure phase of the case interview, there’s silence for several moments.

As with clarifying the question, this can feel awkward.

But asking for this time will show the interviewer that you’re carefully structuring your problem-solving approach.

It will also ensure that you are not quickly addressing a couple of aspects of the business problem but ignoring others, potentially ones that are critical to solving the client’s problem.

Some quick brainstorming is useful here, but also take a step back to maker sure you consider all aspects of the client’s business, its customer demand, and the competition. 

Organize your questions into a comprehensive approach to address all key aspects of the problem.

Mastering the structure phase of the interview is not as easy as the opening, but it’s critical to ensure you have the structured problem-solving approach that will lead you to the right answer to the case.

Focus on this aspect of case interview preparation until you can structure almost every case right.

Case Interview Prep Part 3: Analysis

In the third part of the case study interview, you’ll dig in and analyze the problem.

After Davis outlined his problem-solving approach, the interviewer told him that the client wanted to understand the beverage market and customer preferences to assess the potential success of the product launch.

The interviewer then provided a chart with helpful data.

This part of the interview is important because gives you the data that will help you close down aspects of the case that aren’t at the heart of the problem you need to solve and to better understand key drivers that will point to the solution.

But you’ll also need to do some consulting math .

You should also refer back to the problem-solving structure you laid-out earlier in the interview to make sure your analysis is comprehensive. You don’t want to get lost down one rabbit hole and ignore other important aspects of the problem.

During this portion of the interview, you’ll be assessed on whether you asked relevant questions, have well-reasoned insights into the client problem, and whether you could lead a case like this if you were hired by the firm.

Many consulting candidates find that the analysis phase of the interview is the toughest of the 4 parts.

You need to balance doing consulting math calculations with interpreting data and make sure you cover all aspects of the problem you identified in the structure phase of the case. 

Stick with this aspect of case interview preparation until you’re an expert at it–it will pay off in your interviews. 

Case Interview Prep Part 4: Conclusion

Davis concluded the case with a direct answer to the case study interview question as it was initially asked.

This answer should be both persuasive and logical based on all the information gathered over the course of the interview. Your answer should also include the next steps your client should undertake.

During the conclusion, you’ll be assessed on whether you present a well thought-out solution based on the relevant facts of the case.

Like the opening, mastering the conclusion is not difficult. Take you time to nail this aspect of case interview preparation anyway as leaving your interviewer with a strong impression of your casing capabilities is important.

The Bottom Line for Effective Case Interview Prep

The case study interview is not as complex as it seems if you break it into 4 parts.

Practicing each part of the case on its own will make your consulting interview preparation both more efficient and more effective.

Now that you’re familiar with the 4-part approach to a case interview, the next thing to learn is the 4 different formats case interviews can take.

4 Formats for Case Interviews

There are four formats a consulting case interview can take:

  • Candidate-led – This is the most typical case study interview format. A candidate is given an open-ended business problem to solve by an interviewer. The candidate will break down the question into key parts and decide which part to probe first. The interviewer is looking to see that you know how to drive the analysis of a problem. This case format is typically used at firms like Bain, BCG and Oliver Wyman.
  • Interviewer-led – In this case interview format, a candidate will still be expected to identify and structure the key elements of  a thorny business issue, and then present them to the interviewer. But after they do, the interviewer will direct them to first address a particular aspect of the case. This interview format is typically used in McKinsey cases.
  • Written interview – This is not a common interview format but can be common for particular companies and offices. You will be given a packet of PowerPoint slides and time to review them. During this time, you’ll prepare a presentation using the slides you choose from the ones provided as well as others you create, and you’ll then present it to a panel of interviewers. Written interviews are frequently used by boutique consulting firms and regional offices of larger firms such as Bain’s China offices. For more information, see this article on written case interview.
  • Group interview – Multiple candidates are brought in to discuss a case together and then present their solution to an interviewer. The group case is also not a frequently used interview format. For more information, see this article on group case interview.

While the candidate-led consulting interview is the most frequently used format, you’ll probably see more of the interview-led interview format in McKinsey interviews.

You should also be aware of the written and group interview formats so that if you get one during the interview process, you’re not caught by surprise. But don’t spend a lot of time on preparation for that type of interview unless you’re informed you’ll have one.

Congratulations! 

You’ve made it to the end of our crash course on case interview prep. By reading this article, you now have a strong understanding of:

  • What a consulting case interview is,
  • How to answer case studies using the 4-part approach, and
  • What the 4 different formats for case interviews are.

You are well on your way toward preparing for your first case interview and entering the exciting field of management consulting. 

Still have questions?

If you still have questions on case interview prep, leave them in the comments below. We’ll ask our My Consulting Offer coaches and get back to you with answers.

Also, we have tons of other resources to ensure you get an offer from a top management consulting firm. Check out these topics:

  • Case Interview Workshop Video,
  • Case Interview Examples , and
  • Case Interview Practice .

Help with Case Prep

Thanks for turning to My Consulting Offer for advice on case interview prep. My Consulting Offer has helped almost 89.6% of the people we’ve worked with get a job in management consulting. For example, here is how Brenda was able to get a BCG offer when she only had 1 week to prepare…

8 thoughts on “A Comprehensive Guide to Case Interview Prep [updated 2024]”

In the math calculations of the analysis portion, why was it that there were 8 cans per gallon? Where did that number come from?

Hey, Tonia! Thanks for your question.

In the case, we’re given that the size of the market for US sports drinks is 8 billion gallons. Electrolyte drinks are 5% of this total or .4 billion gallons which equals 400 million gallons.

We’re also given that the product size for drinks in this market are 16 ounces. And in our breakeven analysis, we find out we need to sell 400 million bottles (or cans) to break even. We need to do a conversion to compare our breakeven point of 400 million bottles to the 400 million gallon market size to see what market share we would have to achieve to break even.

Conversion: 1 US gallon = 128 ounces. 128 ounces/ gallon divided by 16 ounces/ bottle = 8. We can fill 8 bottles for each gallon of electrolyte drink we produce. So 1 gallon is 8 bottles (or cans) manufactured by our client.

We divide the 400 million bottle (or can) breakeven point by 8 to get to 50 million gallons. We compare the 50 million gallon breakeven point to the 400 million gallon market size to see that we need to capture 12.5% market share.

Note: In answering this question, I noticed that a UK gallon = 160 ounces, so if you are using UK gallons you will get a different answer!

I hope that helps! Sorry about the confusion between US ounces/gallon and UK ounces/gallon!

Hi, what resources are you typically allowed to use during (virtual) case interviews? Such as a pen, paper, calculator etc.

You’re typically allowed a pen and paper in a virtual case interview but NOT a calculator. Part of what your interviewer is testing for is your quantitative skills, so they want to see that you can do calculations in your head or on paper. See our article on virtual case interviews , for more info. Also, we have an article on practicing your case interview math .

Best of luck!

Can you please explain the ROI formula? I do not understand why (2m-8m)/8m = 25%. That calculation gets a result of -75%

Shouldn’t the formula just be (net profit)/(cost of investment)?

George, thanks for pointing this out! The formula was incorrect, and should be Profit/cost of investment. The correct answer is 25%.

All the best, MCO

thanks for information

great information

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

  • slot via pulsa
  • slot terbaru 2022
  • bocoran admin jarwo
  • demo slot pg soft

© My CONSULTING Offer

We are excited to invite you to the online event.

Where should we send you the calendar invite and login information.

consulting case study types

consulting case study types

The Consulting Guide

  • Introduction
  •      I. How to use
  •      II. What do consultants do?
  •      III. Types of firms
  •      IV. The business model
  •      V. Career path
  • Case fundamentals
  •      I. Analytical skills
  •      II. Soft skills
  •      III. Case styles
  •      IV. Recruiting process
  • Fit fundamentals
  •      I. What firms look for
  •      II. The right stuff
  •      III. Selling your story
  • Interviewer mindset
  •      I. Can you do the work?
  •      II. Can you sell the work?
  •      III. The airport test

The four types of consulting case interviews

An overview of interviewee-led, interviewer-led, group cases and written cases that mbb consulting firms use..

While the skill sets consulting firms want to see demonstrated in case interviews are fairly static, the medium through which they test them can vary.

Below we'll summarize the different types of consulting case interviews you'll encounter and key considerations for each case type.

There are lots of different configurations and case styles. But, put all that aside. The key thing you've always got to remember: all of them are simply a conversation about a challenging business problem. That should be the guiding light." Jacob Best, former Bain Consultant

Type #1: Interviewee led cases

This is the most common type of case interview and it's used extensively by BCG, Bain, Deloitte, Accenture and many other firms. The only notable exception to this is McKinsey, who uses more interviewer-led cases.

Interviewee-led simply means that the pace, flow and content of the case interview itself will be led by the candidate. The interviewer will of course provide the initial case prompt, but beyond that, the candidate is expected to drive the rest of the case to conclusion. Some interviewers may intervene more or less, or be more forthcoming with tips and hints, but the expectation is that the candidate will drive the process.

One key thing to realize then is that this interview type will be more effective at assessing one's ability to navigate and lead him/herself through the problem itself (as we discussed above as one type of test on leadership skills ).

Examples of interviewee led cases:

  • Low cost carrier , case type: profitability. Help the client (a low cost carrier in Asia) remain profitable despite a recent fuel price hike. How would you approach this problem and ensure profitability for years to come?
  • Coffee Co. , case type: market entry. Your friend wants your help in determining whether opening a coffee shop outside of London is a good idea.
  • Footloose , case type: market entry. Help management decide if they should focus their efforts on competing with Badger in the work boot sector, or focus their resources on further strengthening their position with casual boots.
  • Wumbleworld , case type: profitability. WumbleWorld, an amusement park in China, has asked Oliver Wyman to identify the reasons for their company's declining profits and develop suggestions for how to reverse this trend.

Type #2: Interviewer led cases

This is the style of interview used almost exclusively in McKinsey interviews, although we've had numerous reports of Partners straying from the format in final round interviews and using a more informal, interviewee-led style.

The key difference between this type and interviewee led is that the interviewer will lead the candidate through a predetermined path and series of questions and thus it will be less of a candidate "choose your own adventure" experience.

The benefit, from the firm perspective, is a standardized interview. The goal is to produce more standardized and accurate ratings of candidates. The downside here is that there is less room for the candidate to demonstrate their own skill in structuring, navigating and leading the problem solving exercise. While interviewers will still have candidates do things like create an initial problem structure, regardless of what the candidate proposed, they'll then dictate which bucket of analysis or investigation to do next.

Examples of interviewer led cases:

  • Diconsa , case type: product launch. In this case study, the Gates Foundation asked McKinsey to design a basic financial-services offering for inhabitants of remote communities in Mexico.
  • Electro-Light , case type: product launch. The client is SuperSoda. SuperSoda is a top-three beverage producer in the United States and has approached McKinsey for help in designing a product-launch strategy.
  • GlobaPharm , case type: mergers & acquisitions. GlobaPharm has engaged McKinsey to evaluate the BioFuture acquisition and to advise on its strategic fit with GlobaPharm's biologicals strategy. Our overall question today, therefore, is "Should GlobaPharm acquire BioFuture?"
  • Edu transformation , case type: organizational transformation. The government of Loravia wants to achieve major improvements in both the quantity and quality of education for its children. They’ve asked McKinsey to provide advice on how they can achieve this transformation in its school system.

Check out the RocketBlocks casebook for more examples of full cases to use in your practice

Type #3: Written cases

A newer form of case interview that Bain and a handful of other firms have been pioneering is a heavy mix of data analysis plus a presentation.

This format is still evolving quickly right now but in most cases candidates are handed a data trove consisting of a mix of slides, datasets and research and asked to cull through it, assemble a recommendation and make a presentation to a group of consultants. Typically, candidates are given 2 hours to review the data set and build a presentation. Then they'll present their recommendation to a group of senior consultants for roughly twenty minutes and then host Q&A.

For a detailed overview of written cases, including a side-by-side comparison of BCG's format vs. Bain's format, see the full write up on the written case format .

"In the written cases, you're usually given a deck of slides and some time to review. It's different but you want to follow the same process: structure the problem, find supporting data and propose a series of solutions." Abhi Tiwari, former BCG Consultant

Format wise, this type of case interview is designed to get even closer to modeling the on the job experience: analyze data, pull together a recommendation and present to the client. Bain, in particular, has been pushing this because they found that their interview process was starting to over index on the importance of certain soft skills and cultural elements and, in turn, down playing the analytical elements.

Overall, while this type of case will evaluate all the same soft skills and analytical skills, it gives candidates a little more time to dig into the data, ruminate on it before having present back an answer and recommendation.

Type #4: Group cases

This style of case interview is the most unique and the rarest of the types. The first major strategy firm to employ group case interviews was the Monitor Group, which was acquired by Deloitte in 2013. Unsurprisingly, the skillset that this interview will tease out more than any others is the candidate's collaborative skills. Firms that utilize a group case are usually particularly interested to see how candidates will interact with each other.

Some of the key collaborative dynamics they'll be looking at are: who is helping drive the discussion forward? Who is ensuring that the different viewpoints are being heard, acknowledged and discussed? How are resolutions between differing points of view being resolved or not resolved and why? To look at one specific example, consider the case of one candidate advocating a factually incorrect position. Does another candidate successfully convince him/her otherwise? Consultants often have to "walk clients" back from incorrect positions and just telling a client "you're wrong" won't cut it, because it will damage the relationship with a client.

"I found the fixed-style McKinsey interviews more interrogative than others. Some of the cases from boutique firms felt more personal, and the interviews themselves felt a little more unpredictable than some of the larger firms. There are differences, but on the whole, it's still a case!" Richard Smith, former Bain Consultant

How many cases do I have to do?

Good question! The process varies from firm to firm, as you'd imagine, but there is a fairly typical end-to-end recruiting process that takes place for most firms. Let's take a look at that now.

P.S. Are you preparing for consulting interviews?

Real interview drills. Sample answers from ex-McKinsey, BCG and Bain consultants. Plus technique overviews and premium 1-on-1 Expert coaching.

Launch your career.

  • For schools
  • Expert program
  • Testimonials

Free resources

  • Behavioral guide
  • Consulting guide
  • Product management guide
  • Product marketing guide
  • Strategy & BizOps guide

Interview prep

  • Product management
  • Product marketing
  • Strategy & Biz Ops

Resume advice

  • Part I: Master resume
  • Part II: Customization
  • Focus: PM resumes
  • Focus: Consulting resumes
  • Focus: BizOps resumes

Close Menu

How To Write A Consulting Case Study: Guide, Template, & Examples

When you deliver a successful project, do you publish a consulting case study about it?

A consulting case study is a short story about a successful project that explains…

  • The problem your client was dealing with before hiring you;
  • your expertise and process for solving that problem;
  • and the results your expertise and process created for the client and their business.

In my experience, our consulting case studies are among the most powerful pieces of content we publish. They’re a big reason why people are comfortable signing up for our Clarity Coaching Program .

Because our case studies prove our program helps our clients get results.

I can say that our coaching program is the best on the market until I’m blue in the face.

But it’s much more powerful for consultants to see the results others have experienced for themselves: through our case studies and testimonials.

If you don’t have something of value on your website like a case study — something that actually shows you can achieve results for your clients — then your website will only serve as “confirmational marketing.”

It will confirm what people hear about you. But it won’t help you generate interest and leads.

So, if you want to shift your website beyond mere confirmational marketing to an asset that helps you generate leads and conversions, consider writing consulting case studies using the method below.

In this article, you’ll learn how to write compelling case studies that help you win more consulting clients.

Ready? Let’s dive in…

Your case study is proof that not only can you talk the talk, but you can also walk the walk.

What Is A Consulting Case Study?

When a potential client is deciding on whether they will hire you or not, a big question in their mind is…

“Can this person or company really do what they say they can for my business?”

There are many forms of thought leadership you can use to prove you can deliver results.

The consulting case study is one of them.

A case study, in the context of consulting, is typically a written document that describes…

  • the problem a client was facing,
  • the actions you took to solve that problem,
  • and the outcomes it created for your client.

You write case studies to demonstrate the results and value you created for a past or current client.

What makes them so effective as marketing material?

  • They are relatively easy to put together (especially when you use our template below).
  • Your potential clients enjoy reading them.
  • And they are a highly effective way to demonstrate your authority and expertise in your field.

Next, I’ll walk you through how to write a consulting case study.

In our program, one of the things we teach consultants is how to better understand their clients’ problems and articulate their ability to solve those problems in a way that will attract new clients.

How To Write A Consulting Case Study

Here are the steps to writing your consulting case study. You can follow along with our consulting case study template .

1. Get Permission From The Client

You shouldn’t write a case study that names your client without their permission.

So, before you start writing it, ask them if they’d be OK with you publishing a case study about the project.

Now, I’m not a lawyer, and nothing in this article or anything I write is legal or financial advice. But here’s what we’ve found, through running consulting businesses for over two decades, often works best:

A question we often receive from consultants is “What if I can’t use the name of my client or the company I worked with?” Generally, this isn’t an issue. If your contract says you can’t use the client’s company name, or the client says “No” to your request, all is not lost.

What tends to work extremely well is still writing the case study, but without using the client’s name. Instead, describe the client.

For example, let’s say your client is the automaker Mazda. If you can’t use their name, consider “Working with a top 20 global automaker…”

This gives prospective buyers a good idea of the caliber and type of company you worked with.

When you ask your client for their permission to create a case study that features them, you’ll generally find that 9 times out of 10 they won’t have a problem with you doing so, but make sure you ask before publishing.

2. Introduce The Client’s Business

Once you’ve gotten permission from the client, you’ll begin writing your case study. Follow along using our template .

The first section is the introduction. Set the stage here by introducing your client, their business, and their industry.

This section gives context to the case study. Ideally, your ideal client is intrigued by being in a similar industry or situation as the client in your case study.

3. Describe The Problem Or Challenge

In this section, you outline the problem your client was facing.

Be as specific as you can be.

Simply saying they had marketing issues or a problem with their PR is not enough.

The more detail you include the clearer the picture will become and the more effective your case study copywriting will be.

If your ideal client reads this and has a similar problem as the client in the case study, you can guarantee that their eyes will be glued to the screen, salivating to learn how you solved it.

4. Summarize Your Action Steps

Now that you’ve described the problem your client was up against, you’ll explain what you did to help solve the problem.

In this section, break down each part of the process you used or the steps you took to solve it.

The reader should get the sense that you have a process or system capable of solving the problem and getting results.

This is where you get to demonstrate your know-how and expertise. Get as technical as you can. Show your reader “Hey, this is how I can get YOU results too.”

5. Share The Results

It’s time to demonstrate results.

Write the results that were achieved and how they impacted the business/organization/person.

In many cases, the outcome isn’t just dollars and cents — it can also be less tangible value.

Are they less stressed? Do they have more free time? Are they finding more meaning and enjoyment in their work?

Mention if you’re continuing to work with this client through a retainer . If you’re not, describe how the results will impact their business in the future.

This is also a great place to include a quote or testimonial from your client.

The “Results” section is key because it shows prospective clients that you’ve solved the problems they are facing and have delivered the actual results that they likely desire.

6. Write A Call To Action

At the end of the case study, you should always include a sentence or two inviting the ideal client to reach out.

They’ve just read about the problems you can solve, how you solve them, and the results you can create.

They are primed and ready to reach out to inquire about how you can do it for them.

But if you don’t have a direct call to action for them to do that, many of them will leave without taking action.

So, write a direct, clear call to action that takes them to a page where it’s easy to book a consultation with you or where you provide your contact information.

7. Share It

Marketing for consultants is all about providing value to your ideal clients, being known for something specific, and positioning yourself as an expert and authority that your ideal clients want to work with. So, whenever you publish a piece of valuable content like a case study, your mission is to get as many eyes on the case study as possible.

The best place to publish your case study is on your website or blog.

You can also submit case studies to industry publications. These are a great way to spread the word about you and your client’s business.

Make sure to also share your case study on all social media platforms where your ideal clients hang out online. For consultants, that means LinkedIn.

Work your “marketing muscle” by actively promoting your case study, and you’ll reap the rewards of this powerful piece of authority-building content.

Writing case studies for your consulting business not only helps you land new clients, but it’s also a great way for you to review past projects.

Doing this helps you to find what worked and what didn’t.

And you’ll continue to learn from your experiences and implement your best practices into your next consulting project.

Consulting Case Study Template

Click here to access our Consulting Case Study Template .

consulting case study template

This template is designed using a “fill in the blank” style to make it easy for you to put together your case studies.

Save this template for yourself. Use it to follow along with the examples below.

Consulting Case Study Examples

Here are some example case studies from our Clarity Coaching Program clients.

1. Larissa Stoddart

Larissa Stoddart teaches charities and nonprofits how to raise money.

To do that, she provides her clients with a training and coaching program that walks them through twelve modules of content on raising money for their organization, creating a fundraising plan, putting an information management system into place, finding prospects, and asking those prospects for money.

how to write a consulting case study example

Through her case studies, Larissa provides a comprehensive overview of how she helps her clients build robust fundraising plans and achieve and win more donations.

2. Dan Burgos

Danila “Dan” Burgos is the president and CEO of Alphanova Consulting, which works with US manufacturers to help them increase their profitability through operational improvements.

The goal of Alphanova is to increase their clients’ quality and on-time delivery by 99 percent and help them increase their net profits by over 25 percent.

manufacturing consultant case study example

Through his case studies, Dan lays out the problem, his solution, and the results in a clear simple way.

He makes it very easy for his prospects to envision working with his firm — and then schedule a consultation to make it happen.

3. Vanessa Bennet

Through her company Next Evolution Performance, Vanessa Bennett and her business partner Alex Davides, use neuroscience to help driven business leaders improve their productivity, energy, profitability, and staff retention, while avoiding burnout.

consultant client work webpage

Through her “Clients” page, she provides a list of the specific industries she works with as well as specific case studies from clients within those industries.

She then displays in-depth testimonials that detail the results that her consulting services create for her clients.

These are powerful stories that help Vanessa’s clients see their desired future state — and how her firm is the right choice to help them get there.

As you see, our clients have taken our template and made them work for their unique style, clients, and services.

I encourage you to do the same.

And if you’d benefit from personal, 1-on-1 coaching and support from like-minded consultants, check out our Clarity Coaching Program .

Get Help & Feedback Writing Consulting Case Studies

If writing and demonstrating your authority were easy, then every consultant would be publishing case studies.

But that’s not the case.

Sometimes it helps to have a consulting coach to walk you through each step — and a community of like-minded consultants with whom you can share your work and get feedback from.

That’s why we’ve built the Clarity Coaching Program.

Inside the program, we teach you how to write case studies (among dozens of other critical subjects for consulting business founders).

And we’ve also created a network of coaches and other consultants who are in the trenches — and who are willing to share their hard-fought knowledge with you.

Inside the Clarity Coaching program , we’ve helped over 850 consultants to build a more strategic, profitable, and scalable, consulting business.

LEARN MORE ABOUT CLARITY COACHING

We’ll work hands-on with you to develop a strategic plan and then dive deep and work through your ideal client clarity, strategic messaging, consulting offers, use an effective and proven consulting pricing strategy, help you to increase your fees, business model optimization, and help you to set up your marketing engine and lead generation system to consistently attract ideal clients.

15 thoughts on “ How To Write A Consulting Case Study: Guide, Template, & Examples ”

This is a great outline and I found it quite helpful. Thanks.

Shana – glad you found this post helpful!

I have used case studies to get new clients and you're right, They work.

Jay – thanks for sharing. I've worked with many clients to implement case studies and have used them in several businesses and have always found them to be great at supporting proof and establishing authority and credibility.

Dumb question: guess you can't charge if you're doing a case study, huh?

Terri – No such thing as a dumb question where I come from. Always good to ask.

You definitely can charge for case studies. Michael Stelzner has a lot more information on writing white papers (and case studies) as projects.

This post was really aimed at using case studies to win more business and attract clients. But you can definitely offer this service to companies and they'll pay handsomely for it.

That was a great question!

Hello,I am really glad I stumbled upon your consulting site. This outline is very helpful and I love the e-mails I recieve as well Thanks!

Happy to hear that

This is a great site for consultants – great information for the team to share with consultants that reach out to us. Thank you!

Thanks Deborah

It is a good steps if we know how we start and control our working.

All I wanted to know about putting together a case study I have got. Thanks so much.

to put together your consulting case study: to put together your consulting case study:

I have used your outline today to write one case. Thank you for sharing.

Hi – This is a great piece, and covers all the core elements of a case study with impact.

Couple of extra points…

1. it’s really powerful to provide a mix of qualitative and quantitative results where possible e.g. ‘we saved the client $500 per month and feedback tells us morale improved’

2. We are seeing more and more consultancies include images and video in their case studies. This obviously depends on the context, so while it’s not necessarily appropriate within the confines of a bid, it is definitely something to think about for those case studies that you want to publish online or in a marketing brochure.

Leave a Comment, Join the Conversation! Cancel reply

Your Email will be kept private and will not be shown publicly.

Privacy Overview

Logo

Consulting Case Study Interviews

All management consultancy firms, and many other city organisations, use case studies as part of their interview process..

For a management consulting job you are likely to have three to five interviews, of which two to four will probably involve a case study. The case study section of a one-to-one interview can last between 10 and 30 minutes, and you might even have two case studies within a half hour interview.

For a case study your interviewer will present a situation or question to explore and resolve either orally, or in writing, or both. For example:

  • How would you choose the optimal balance of economy/business class seats on an airline?
  • What strategy should a New World wine producer use when seeking to enter a European market?
  • How many washing machines are sold each year in the UK?

The question may be as brief as those above, may be a slightly more specific business problem explained to you verbally, or may require preparation by reading related documents right before the interview. Occasionally, the interviewer may ask you about the business issues linked to something from your own background, so be prepared!

Case studies simulate aspects of consulting assignments and may even be based on a recent project led by the interviewer. Each case allows the recruiter to assess your capability and performance and you will need to perform well on a number of case studies to secure an offer of employment.

According to consulting companies, the key attribute they look for is  passion . This translates into showing engagement, energy, and interest in the problem under discussion as well as working through the question at hand. Remember, the interviewer is likely to be someone who manages consulting projects day-to-day (‘Job Manager’, ‘Engagement Manager’, ‘Senior Associate’) and so, as in all interviews, one of the judgements they will be making is whether or not you are someone they would want on their team.

Read on to find out more and watch the video below from Jonathan Black, the Director of the Oxford University Careers Service and former consultant, who shares his advice for tackling management consulting case studies.

How to Get Practice

You will perform better if you are familiar with case study formats and expectations, and have invested time to practice many different examples. Seek out ways to learn and practice:

  • Start by reading some of the books listed in "Our Resources" below and looking at the web-based resources.
  • Use the 'virtual internships' available from leading firms on  The Forage  website to work through some extended management consulting case study materials. These will be more in-depth than a Case Interview, but provide highly relevant learning materials and content to help you understand the range and style of issues you may be asked to address.  
  • Use examples provided by management consulting firms on their recruitment webpages. Many include example case questions (and worked answers) that you can work through, and short videos are now common.
  • During term, look for employer-led case study workshops advertised on CareerConnect : usually the Careers Service hosts three workshops in Michaelmas term, two or more in Hilary term and a further workshop in Trinity term.
  • In addition, employers host their own case events across Oxford in Michaelmas term, details of which will be advertised on their own recruitment webpages.
  • Join business or consultancy focused student societies as listed in our Management Consulting Societies resource .

Attending one or two workshops will help you to get started, but it is important to practice more, and to work with others to practice case studies face-to-face. This will help you to get used to:

  • thinking out loud;
  • showing how your ideas are developing;
  • stating the assumptions or constraints you are applying to your thinking; and
  • getting used to reviewing and revising the ideas that you have developed in front of someone else.

It is best to partner with other students to practice. Aim to play the role of 'interviewer' as well as 'interviewee' as you will learn different things from having to watch and listening to others. For example, you can learn the value of a quickly sketched graph or flowchart to support an explanation, or identify the critical information needed to explain a new concept or proposal clearly.

Working with a number of different partners can also be invaluable. Even within a single organisation you will meet many interviewers, who each work in a different way. Modelling this variety in your practice will help as it will expose you to differing work styles and broadens the variety of concepts you are likely to encounter and be comfortable using in your own analyses.

Some student societies run sessions where students work with other students to practice, and may offer a Case Buddy Scheme scheme like the one offered by CapitOx in recent years. Details can be found on their website, or contact the society's president for more information.

See the "resources" sections below for materials to get your started and ways you can get practice.

Top Tips and Useful Frameworks

  • Clarify . You’ll need to understand the problem and its component parts sufficiently to get started. Only if absolutely necessary should you seek extra information or clarification. It’s a good idea to briefly state your understanding of the problem in your own words. The case may appear simple and with no data (for example, ‘What would you think about in setting up a new coffee shop in Oxford?’) or very complex with pages of printed charts and graphs. It is much better to make assumptions (aloud) and get started, such as, ‘We are looking at burger sales in Europe; this is a large market so I propose to focus first on England and then extrapolate the results’.
  • Take the lead . The interviewer wants to see if they’d like you on their team so show them that you can take the initiative .
  • Think out loud . The interviewer wants and needs to know what you are thinking. They are not telepathic so describe out loud what you are thinking every step of the way.
  • Write things down . Make sure you have an A4 pad of paper and pen/pencil with you, on the slim chance they don’t supply them. As you think and talk, write large and legibly, in note form so the interviewer can follow what you are doing and perhaps join in. Leave lots of space so you can add new thoughts as the case develops. Don’t be afraid to start new sheets (paper is cheap) and draw pictures/sketch graphs/block diagrams.
  • Landscape paper . We recommend that you use the paper in a landscape orientation. You can move left to right across the page(s) with Structure –> Hypotheses –> Data –> Recommendations, which will mirror how consultants’ presentations appear. You may well need more than one sheet.
  • State your approach . It’s not so much the answer you get but the process you use to get there. Avoid the temptation to answer the case immediately with a possible solution – consultants have to show they have been thorough and demonstrate how they have explored every option. In the jargon it’s ‘MECE’ (pronounced “meesee”): Mutually Exclusive and Collectively Exhaustive.
  • Explain . Once you are clear about the problem, explain how you are going to approach it. List some top-level topics either down the left hand side of the (landscape) page working towards the right hand side with more details, or, work from top to bottom (portrait). Either way, the key is to clearly show your thinking.
  • Ask . After you have laid out the structure and demonstrated that you can take the lead on the problem, ask if the interviewer wants you to focus on a specific area or has more information for you. This can be a full three to five minutes after you start; don’t be tempted to ask for help sooner as that shows you need lots of guidance and would be interpreted as someone who does not take initiative and would not pull their weight on the interviewer’s team.
  • Listen . Be ready to listen and respond to any direction that your interviewer may give you in response to your proposed analysis. The structure you recorded on paper will help you to remain focused and provide you with a ’map’ or reference point if you get diverted or distracted. Also, if/when you think of topics you missed, you can add them to your structure. Most importantly it will demonstrate to the interviewer that you have the logical thinking and analytical skills they seek.
  • Develop hypotheses . Don’t try to answer the question directly but develop hypotheses to which you may not have the answer, for example,  ‘prices are higher than competitors’ and ‘revenues have dropped because volume has dropped’. Keep talking as you develop all this.
  • Suggest data you would need to prove/disprove the hypotheses . Sketch some simple charts, for example, ‘I’d need to know sales of car tyres over the last three years,’ then draw an x-y chart, with time along the x axis and sales up the y axis. Then guess some lines, for example, sales rising over the three years. You don’t have to know the actual data (how could you?) but you can say, ‘If sales have done this, then…’.
  • Develop some recommendations . Once you have found/agreed some data, it’s time to move to the final stage, recommendations for the client. ‘If I were working with a client considering opening a new coffee shop in Oxford, based on these data, I would recommend…’.
  • Be comfortable working with numbers! If you have not used them for a while, make sure you are especially comfortable with percentages, ratios, long division and multiplication, estimates, and working with large numbers. Dust off your mental arithmetic skills. Be happy to round to one or two significant figures. Make sure you know some rough data, such as populations of UK (+/- 60 million), London (+/- 8 million), EU - pre-Brexit (+/-500 million), USA (+/- 300 million); size of a football field (+/- 7,000m 2 ) or length of a jumbo jet (+/- 70m); weight of a human (+/-70kg). It is also a good idea to use the metric system since it’s easier not to get jumbled up with units.
  • Use your common sense . You may not have any business experience in the areas that the case study covers, so instead make use of any perspectives that you may have acquired from being either a user or a consumer of the products and services that are the subjects.
  • Be ready and willing . Be prepared to respond to further interviewer requests as you go along, e.g. to brainstorm ideas or to work through some estimates of market size. Positive energy, engagement and enthusiasm (perhaps even enjoyment!) are important indicators that you are more likely to thrive in a consulting career.

In your research and reading you are likely to come across analytical frameworks that can to help you deal with some of the cases you will face. Some of the basic frameworks include:

  • SWOT analysis: strengths, weaknesses, opportunities, threats
  • 4 Cs: customers, costs, capabilities (of the organisation), competition
  • 7 Ps of Marketing: product, price, promotion, place, packaging, positioning and people .
  • Porters five forces

Business Case Studies

If your degree studies have no business element, the interviewer will not expect much sophistication, and will probably help you to choose useful factors to focus on. It is important, though, to show a degree of commercial awareness by understanding some of the main terminology that you may hear or face in a business context, e.g.: Profit or Loss = Revenue – Costs.

There are essentially two types of business cases that you can prepare for:

  • 'Profits are down'. This is an historical view and we suggest you start with breaking down the elements of profit and then probe each one. Make sure you are familiar with a basic profit and loss account: check out our basic definitions of profit and loss terms for an example below.
  • 'Market entry'. This is a future focused view and can arise from an organisation wanting to enter a new market (for example, a new country), or adding a new product line (for example. adding an electric or hybrid vehicle to a range of cars), or both. You could use the 'Seven Ps' framework for this one.

Bear in mind that a case study could start as a ‘profits are down’ case and turn into a ‘market entry’ case, for example:

“So, having identified the source of poor profits, we can explore ways to improve matters by adding new markets”.

Generally speaking, for most non-MBA graduates, recruiters are interested in assessing the quality of your thinking and your approach to the problem. Don’t try to be too clever or over-elaborate in how you approach a question.

Profit and loss terms

NB: The numbers above are all examples for a mythical, profitable business. There are several terms for the same heading e.g. “Margin” instead of “Profit”. What’s included in fixed and variable costs can vary depending on the industry and product. In a case study you’ll usually stop at Operating Profit.

Maths Questions

You may also get two types of basic maths estimation questions: simple (in that there is only one way to answer it) and complex (there are many ways to get an answer). The simple type tests your comfort with handling numbers and making estimates. Examples include:

  • How many footballs would fit in this building?
  • How long would it take to move Mount Fuji?

The complex type of maths estimation tests your creativity in thinking about approaches; they are generally consumption related. An example might be: “Estimate how many petrol stations there are in London”. The best candidates will think of two or three ways to answer this question. The trick is to make simplifying estimates and assumptions, describe aloud the assumptions you are making, write things down, keep track of the sums, and don’t use a calculator. At the end, go back and identify where you have made assumptions and put some ranges on your original guesses, for example, “I guessed the population of London at 5 million, but if it is actually 8 million then I’d increase my answer by 60%" (that is (8-5)/5).

Although you may be working with rough estimates and assumptions, it will help you make a more confident start and ensure your estimates are based on sound assumptions if you:

  • learn a few key numbers - for example, populations in major markets (e.g. UK, Europe and the USA) or cities (Beijing; Lagos; London; New York; Paris; Singapore); an idea of size or distances in USA, Europe, London-to-Sydney, the circumference of the earth at the Equator.
  • can estimate some sizes of common objects, including an aeroplane, a building, a city, a car, a human being, a football, a golf ball.

As you read more and practice cases, you might jot down notes of numbers that you find yourself using more than once.

Our Resources

You may be able to find copies of the following case study books through the University library or via student societies. Otherwise have a look at cheap copies with second-hand booksellers online or consider purchasing new with other students applying for consulting:

  • Case In Point , Marc Cosentino
  • Case Interviews: mastering the case interview , Alexander Chernev
  • WetFeet Press Career Management Insider Guides: Ace Your Case!, Consulting Interviews / Ace Your Case II-V
  • Management Consulting,  Joe O'Mahoney
  • the Vault (Career Library) Guide to Consulting
  • Teach Yourself Successful Consulting, Anna Hipkiss

External Resources

  • Ace the Case  - management consulting case interview questions
  • CapitOx  - CapitOx usually has a Case Study Buddy scheme to find and interact with students around Oxford who are also interested in consulting and want to practice case study interviews.
  • Case Coach.com/blog  information, advice and resources from Case Coach, a firm offering a Case Library with 100+ cases to practice. Requires registration.
  • Case Interview Bootcamp -   An online bootcamp to help you prepare for your case study interviews.
  • Case Maths - A tool to help you practice mental arithmetic.
  • Case Questions
  • Consulting Case 101  - a resource offering lots of cases by industry, by case type and by consulting firm and a Case Partner opportunity to practice with others in your area.
  • Target Jobs: Management Consulting

Case resources from the firms:

  • Bain & Company: Interview Preparation
  • Kearney: Crack the Case
  • LEK: Interview preparation
  • Oliver Wyman: Interview preparation
  • The Boston Consulting Group: Interview Resources
  • McKinsey interview
  • CareerConnect EVENTS
  • RELATED NEWS

Looking for more?

Check the CareerConnect platform for all our upcoming events and opportunities, book appointments, find jobs and internships, and more.

Login to CareerConnect

Recommended links

Oxford Guide to Careers 202 4

Preview of the Oxford Guide to Careers 2024, fold

Cover Letters

Sectors & Occupations

See a Careers Adviser

Connect with us

  • Follow us on    LinkedIn
  • Follow us on  𝕏  X  (Twitter)
  • Follow us on    Instagram
  • Follow us on    YouTube
  • Follow us on    Facebook

Top 10 Case Interview Frameworks: Beginner Mistakes

“Which framework to use?” is probably among the most common questions popping up in a candidate’s mind when confronting a case.

This definitive guide will not only answer that question by introducing a few common frameworks, but also tell you HOW to use those frameworks more effectively during case interviews , and what pitfalls you should be aware of.

Table of Contents

Case interview frameworks – Overview

What are case interview frameworks.

Case interview frameworks are templates used to break down and solve business problems in case interviews. A framework can be off-the-shelf or highly customized for specific cases; it can also be tailored for certain functions/industries, or versatile enough for general problem-solving.

Common case interview frameworks include:

  • Profitability Framework
  • Business Situation Framework
  • McKinsey M&A Framework
  • 4P and 7P Frameworks
  • Porter Five Forces Model

External vs Internal

Qualitative vs quantitative.

  • Cost vs Benefits
  • 2×2 Matrix (e.g.: BCG Growth-Share Matrix)

SWOT Analysis

consulting case study types

All of these frameworks will be discussed later in this article.

During a case interview, you use consulting frameworks to break down the problem into smaller pieces through an issue tree and test each branch to see if the root-cause is in there. If a branch indeed contains the root-cause, you break it down further. Rinse and repeat until the root-cause is identified.

The big part of problem solving is about breaking down the problem in almost every step of the case.

What should I keep in mind when using consulting frameworks?

Templates should be treated as guidelines, and not strict rules . The same applies to case interview frameworks.

In the past, case interviews were much more predictable, and frameworks were more applicable. However, nowadays, case interviews are more similar to real business problems, where frameworks need a lot of customizations (you’ll see this word repeated a lot in this article) to be useful.

In fact, the whole consulting industry exists on the basis that consultants can customize theory to real, difficult business situations and produce positive results; nobody pays hundreds of thousands of dollars for them to recite a textbook – any college freshman can do as much.

That’s why in my Case Interview End-to-End Secrets Program , I don’t teach candidates to use frameworks – instead, the focus in on the fundamentals of case interview (problem-solving and business intuition) as well as the tips and techniques for instant performance improvement.

How can I use consulting frameworks effectively?

Here’s a problem with case interview beginners – they tend to go straight for the frameworks, before even knowing the basic mechanisms and principles of case interviews.

If you are one of those beginners, you must first grasp the basics of case interviews – the fundamentals of case interview problem-solving, the issue tree, and the MECE principle. I have written extensive, separate guides on these topics, but for starters, I advice you to read this Case Interview 101 comprehensive guide. 

Busting case interview framework myths

Myth 1: “the more frameworks i know, the better”.

Before we proceed with the popular frameworks in consulting and case interviews, here are four huge myths about frameworks you should steer clear of.

Spend your time learning to draw customized frameworks/ issue trees instead. Case interviews are getting progressively more realistic and less conforming to specific frameworks, so trying to memorize dozens of frameworks is of no use.

Additionally, you should attend to the qualitative side of things, to deeply absorb each framework and its use; skimming the surface will come back to bite you later.

Myth 2: “There must be a framework out there that fits this case”

Ready-made frameworks CANNOT cover all kinds of situations. Even regarding the ones covered, existing frameworks are often “okay-fit”, but not perfectly fit.

Just create a framework/issue tree yourself. Nobody deducts your points for not using a ready-made tool, they even give you points if you can customize it.

Myth 3: “The fancier the framework, the more impressed the interviewer”

You are definitely not wooing anyone by being fancy-schmancy here. Nobody cares about your shiny frame if it does not fit with the picture.

Consultants are very practical and result-oriented people ; what impresses them are candidates who really know what they are talking about, and actually produce good results.

What’s worse is that you also run the risk of appearing superficial; it’s not difficult for consultants with years of experience in the field to fully expose your bluffing. If that happens you may as well say goodbye to your chance of getting hired.

Myth 4: “Knowledge of frameworks is irrelevant in interviewer-led cases”

The assumption underlying this myth is that in interviewer-led cases , the candidate is not the driver of the case, so he or she does not need to actively break down the problem.

This cannot be further from the truth. Many questions in interviewer-led cases are about frameworks/issue trees (“What factors would you consider to solve this problem?”).

Even with other question types you still need to structure answers like a mini-case. Appropriate knowledge of frameworks, as such, is still a MUST.

Five common case interview frameworks

Profitability framework.

Profitability is the most common problem type in case interviews – that means the Profitability Framework is the first one to master for every prospective consultant. You have to absolutely nail it every time, there’s no way around it.

In case interviews, the Profitability Framework is used to mathematically break down the problem, before switching to more qualitative frameworks to devise solutions.

Most of the time, the framework looks like this:

consulting case study types

What’s so good about it?

  • Firstly, the Profitability Framework is a surefire way to draw a structured issue tree , as the framework is fundamentally MECE.
  • Secondly, this framework is grounded in a simple mathematical basis – there’s no confusing qualitative concept to get lost in; heck, “revenues minus costs equal profits” is common sense. That’s why the Profitability Framework may as well be the easiest framework ever devised by humankind (or consultant-kind).

Are there any shortcomings I should be aware of?

  • The Profitability Framework is generic; it may not reflect the nuances within the business enough to draw insightful conclusions. In businesses with wide price ranges, for example, just the total sales volume and average unit price do not tell you much.
  • To extract more insightful information, either drill down quantitatively by introducing revenue/cost components not expressed in the basic framework (e.g.: revenue by product), or combine it with a qualitative framework.

Business situation framework

This is an extremely versatile template you can use in nearly every case, so make sure to learn it well. It’s not even a “should”, but a “must”.

In my video , I referred to the Business Situation Framework by the more tell-tale “3C & P”, based on it being derived from the famous 3C Framework. These four letters stand for “Company, Customers, Competitors, Products” – areas that the framework analyzes to yield solutions.

consulting case study types

  • The one big advantage of the Business Situation Framework is its comprehensiveness – covering four crucial internal and external factors in business strategy.
  • This framework is quite flexible – you can use it as a template to draw customized issue trees for all kinds of cases. In our video, I demonstrated this by applying it to solve an HR problem.
  • The very same comprehensiveness making the Business Situation Framework flexible, also makes it generic, hence the need for extensive modifications; in many cases (the one in our video, for example), not all four components are relevant.
  • It is not a beginner-friendly framework – it does not explicitly state which factors to consider under each main branch; newbies often end up in awkward situations, not knowing what to do next and thinking in a bottom-up manner.

How do you avoid that situation then? I’m inclined to say “practice”, but that much is obvious. A less obvious solution is to equip yourself with some “ninja tips” by learning how each C and P is usually segmented, although again I have to emphasize that it’s vital to maintain a flexible mindset.

McKinsey M&A framework

I absolutely love this one because it works in almost every single M&A case.

There isn’t an official name for this framework, but since it is used by McKinsey consultants when confronting an M&A issue, I’d just call it the “McKinsey M&A Framework”.

The framework assesses a proposed M&A on three dimensions: the stand-alone value of each involving companies (values, strengths, weaknesses, etc.); their synergy, i.e. will the two companies combined be greater than the sum of its parts; and other factors, such as feasibility, culture, legal issues, etc.

consulting case study types

  • Firstly, the segmentation of stand-alone values and synergy is intrinsically MECE , helping the candidate cover all possibilities – every value of each company must fall into one of these categories.
  • Secondly, the framework prompts the user to actively look for “Other factors”, increasing its suitability in unique circumstances.

Are there any shortcomings I should be aware of? 

  • The framework does not tell you what to look for in each branch, especially in the “Other factors” branch; this ambiguity shouldn’t be too much of an issue for experienced consultants, but might prove troublesome for candidates.
  • Again, as with the previous Business Situation Framework, having a few ninja tricks up your sleeves should help you avoid getting stuck, just don’t rely on them too much.

4P / 7P Marketing Mix

This one is perhaps the single most popular framework in marketing. In case interviews , the 4P/7P Framework is used to formulate and implement marketing strategies for the supposed client, such as in competitive situation or market entry cases.

The original Marketing Mix covers four aspects – Product, Price, Place, and Promotion – thus, “4P”; note that “Place” does not pertain to any physical location, but the channel used by the company to deliver its products to its customers.

When services are involved, the mix becomes 7P; the new additions are: People – those performing the services; Process – how those services are delivered to the customers; and Physical Evidence – the visible, physical clues about the services (think of decorations inside a restaurant).

consulting case study types

  • The best thing about this framework is its sole focus on marketing, making it very efficient for situations where marketing is the primary/only concern.
  • Both the 4P and 7P variants are inherently narrow in scope; candidates must always be mindful that they are not covering the big picture with this framework. Only use them to develop marketing solutions.
  • The 4P Marketing Mix, specifically, is not even comprehensive enough for some tangible products, such as high-end fashion, where People, Process and Physical Evidence make huge differences.

Porter’s five forces model

Porter’s Five Forces Model is best used when candidates ask for the case context surrounding the client company; this framework helps them know what to ask.

Michael Porter’s model analyzes how a company’s Competitors, Suppliers, Customers interact with it, as well as how New Entrants and Substitute Products might threaten its place in the industry; it produces a snapshot of the relative power the business holds over its industry environment.

consulting case study types

  • The model’s coverage of the industry landscape is extensive, giving the candidate a vivid picture of the industry surrounding and interacting with the client in the case.
  • This framework doesn’t give a clear answer as to what to do – that is its primary drawback; Porter’s model is not “deep” enough to answer such questions.
  • The framework is not comprehensive enough for certain industries where political and legal issues, as well as complementary products, are major factors.
  • Another thing to keep in mind: Don’t ever analyze a company with the Five Forces Model – the Five Forces Model describes the industry around that business, not the business itself.

Five mini-frameworks – All-purpose tools

These powerful mini-frameworks are probably the most under-appreciated problem-solving tools ever existed.

Mini-frameworks, like the larger frameworks, are also templates to break down information in a top-down, organized fashion.

Unlike their big cousins, however, these are almost never a primary or upper-most component of an issue tree. Furthermore, while common case interview frameworks are, to varying degrees, business-oriented, mini-frameworks are universal.

In this section, I’ll introduce you to five mini-frameworks I find most helpful in consulting case interviews. They feature prominently as supplements for larger frameworks in candidate-led cases , or stand-alone templates to answer questions in interviewer-led cases.

This is a quick and easy method to segment information about a particular entity. The internal branch concerns the inside of the said entity, such as functions within a company; the external branch describes anything outside that entity.

Here’s an example of this mini-framework as an adjunct to the Profitability Framework:

South Sea – a company specializing in bottled sauces – has found its profits going down badly for the past few years. They want you to find out what’s causing the problem.

You split their profits into revenues and costs; from the data provided, it seems like a revenue problem so you’re going into that branch first. How do you proceed?

consulting case study types

Here, a quick check can be performed by splitting the factors causing the decline into two groups – external and internal, then ask the interview if the declining profits are also experienced by other American airlines; “yes” suggests an external root cause while “no” suggests an internal one.

This method of segmentation is primarily used in evaluations. By dividing items into two MECE groups, it reduces confusion and minimizes the risk of missing an important item.

For illustration, we again look at the packaged food company in the previous example:

Turns out, South Sea has quite a few internal problems, in both their production and sales functions. Coincidentally, Wilhelm International is looking to acquire South Sea. Wilhelm controls an extensive distribution network, so the South Sea management is quite interested in the deal.

It’s your task to assess whether South Sea should accept Wilhelm’s offer of acquisition or not.

consulting case study types

For this task, I recommend using the McKinsey M&A Framework to break down the analysis into three branches: (1) South Sea’s stand-alone value, (2) its possible synergy with Wilhelm International, and of course (3) there must be an “Other factors” branch as well.

Within each branch, it’s possible to group items into quantitative (profits, growth rates) and qualitative (brand name, capabilities). This combination makes the analysis more MECE , and easier to work with.

Costs vs Benefits

This decision-making tool is pretty straightforward – if the benefits outweigh the costs, you go with that option. Otherwise, you’d be better off keeping your money under the mattress.

The Costs-and-Benefits analysis is a somewhat-business-centric twist of the omnipotent Pros-and-Cons. Both of these approaches work even better with weights attached to each evaluating criterion to reflect its impact.

Now, let’s check up on South Sea:

The acquisition is proven to be beneficial for both sides. With the sales problem solved, South Sea turns its attention to the production issue. The management considers replacing some technologies to improve product quality, but they are not sure if the investment will pay off.

How do you know if the investment is worthwhile?

consulting case study types

A simple Costs-and-Benefits breakdown would suffice.

For benefits you have the financial gains to consider, as well as non-financial benefits such as improved brand image (because surprisingly, people love good food!).

2×2 Matrix

The 2×2 Matrix is a decision-making tool where options are examined using two criteria, each of which forms an axis of the matrix.

How do you apply this matrix in South Sea’s case, then?

Wilhelm International, after acquiring South Sea, is looking to push the sales of South Sea’s products using its distribution chain. However, South Sea’s product portfolio is quite large, and each product line differs greatly in terms of sales, branding, and market growth rate.

You must select which product lines to focus on.

consulting case study types

The 2×2 matrix most famous in the business world, and also suitable for this case, is BCG’s Growth-Share Matrix, which uses market growth rate and market share as decision-making criteria. The position of a business on this matrix suggests whether to invest in, maintain, or discard that business.

SWOT stands for Strengths, Weaknesses, Opportunities, Threats.

This mini-framework is seldom used in case interviews and consulting work because it’s very generic; however, for a quick and easy evaluation of a company’s positioning within the industry context, the SWOT analysis works just fine.

In most case interviews, this is where you usually turn to the Marketing Mix or the Business Situation frameworks, but even a SWOT analysis may yield some insights.

Other case interview frameworks

Besides the ones we have covered, there are some other case interview frameworks and mini-frameworks worth looking into:

  • Six Forces Model: a variant of Porter’s Five Forces, introducing “Complementary Products” into the analysis.
  • Lauterborn’s 4C Framework: a more consumer-oriented variant of the 4Ps, designed for niche marketing.
  • McKinsey 7S Framework: a framework used in McKinsey for analyzing organizational effectiveness.
  • Ansoff Matrix (Product-Market Grid): a 2×2 matrix, designed for product-market strategizing.

Applying frameworks in case interviews

Here are my five rules to effectively implement frameworks in case interviews; if you follow these rules closely, you will absolutely nail the case.

Of these five rules, the first three are about getting the right framework, while the last two are about looking smart during interviews.

  • Getting to know the case: “If you know your case and know your frameworks, you need not fear the result of a hundred case interviews” – always gather as much information as possible before and when you draw your issue tree .
  • Bending the frameworks: don’t ever bend reality to your frameworks; bend your frameworks to reality; remove, add, or modify elements if necessary.
  • Allying with the interviewer: ask the interviewer to help you break down the problem if you get stuck . How do you get him on your side then? By displaying overwhelming consulting traits .
  • 13 Reasons why: “Why do you break down the problem that way?”, “Why do you want this piece of data?” – explain all your questions and decisions as if you stand before the US Congress, and before the interviewer asks you; consultants love accountable people.
  • Frameworks-which-must-not-be-named: don’t ever explicitly say the names of the frameworks (“I’m going to use the McKinsey M&A Framework”); you would sound very rigid, bookish, or worse, arrogant; consultants don’t like big words without substance.

I’ll give you a brief case sample to see how these rules work in practice:

Interviewer: Our client today is a restaurant called BurgerQueen, located on US Highway 66. The restaurant has found its profits going down last year, your task is to find out the problem and give them a solution.

Candidate: Thank you for the very interesting case, I’m quite excited to solve it. Now, before we dive in,, I would like to playback the case to make sure that we perceive it the same way, ask a few questions for clarification, then announce my approach. Does that sound good to you?

Interviewer: Okay, carry on.

Candidate: Well, let’s see… Our client is a restaurant, on a highway, specifically, Route 66. Their profits have been going bad. I am to find the cause, and solve the problem. Am I getting it right?

Interviewer: Yes, you’re right.

Candidate: Thank you. Now I’d like to clarify the case, so I have 3 questions:

(1) I assume from the name that our client focuses on burgers, and probably other kinds of fast food. Am I right? (2) Does this restaurant have a specific target customer, like truck drivers? And (3) Is it part of a rest stop?

Interviewer: I’ll answer your questions: they sell burgers, but there are many other dishes as well – although mainly fast food; the restaurant does not have a specific target customer, their customers are drivers and travelers on the highway in general; they are part of a rest stop, but they do not own other facilities in the stop, just the restaurant.

Candidate: Great, thanks for the information. Now that we’re all on the same page, and the case has been clarified, I’d like to inform you of my approach. To eliminate this problem in the long run, I think it’s best to break down the problem using an issue tree, isolate the root cause in one of the branches, and gather information until we can draw an actionable solution. Is that approach okay to you?

Interviewer: That sounds good. Continue.

Candidate: To analyze this problem, I’m breaking it down into two sides: Revenues and Costs. Unless we have information pointing in the other direction, I’ll first hypothesize that the problem comes from the revenue side. May I have some data on the restaurant’s revenue during the past year, to prove this hypothesis?

Interviewer: Well, this year their revenue went down by about 40%, but the monthly revenues followed the same pattern as the previous year.

Candidate: Thank you for the data. It’s quite a sudden decrease. I think we can confirm that at least part of this problem comes from the revenue side; I’ll come back to check on the cost side later, now I’d like to go deeper into this revenue branch. Is that okay to you?

Interviewer: Okay, go on.

Candidate: Usually, revenue is divided into sales volume and unit price, but it wouldn’t make much sense for a restaurant with many different items on the menu. My limited knowledge of the food service industry is not exactly helpful, so to draw a more spot-on issue tree, may I ask how they segment the revenue in this restaurant?

Interviewer: Okay, here’s the answer: another way they segment the revenue in a restaurant is into “number of customers” and “average ticket size”, the latter being the purchase value per customer.

What are the key takeaways here?

You can see the candidate tried to gather information on the case through the playback and clarification steps; as a result, he correctly decided that the Profitability Framework is suitable for this case.

However, he quickly found out that the conventional “revenue = volume x price” isn’t too insightful, so he knew he needed to bend the framework.

Unable to find a good way to segment, he asked for help from the interviewer – note how he showed a relevant purpose for the request, and demonstrated that he at least made an effort – these are what we call “consulting traits”.

You should also notice that throughout this brief opening part, the candidate never explicitly mentioned the name of the Profitability Framework, and he always explained his choices before being asked.

Let's practice!

EXERCISE: Develop a 2-level issue tree for this case

The Megapolis City Council is looking to solve a major problem in the city’s traffic – for the last decade, the number of traffic accidents has been rising steadily.

Which factors would you look at, to tackle this problem?

This question apparently can not be answered using any aforementioned framework. In real life, consultants rarely use pre-defined frameworks to solve their client’s issues. Rather, they create unique frameworks based on the MECE principle specific to their problems.

There are few things you should bear in mind to shortcut the way to your own framework:

  • Be as MECE or structural as possible.
  • Use the issue tree to sketch your framework.
  • Break down your problem in a top-down style.

Practice this step-by-step with any real-life issues.

Want to learn more? Join millions of others on our Case Interview End-to-end Secret Program .

Then, to receive personalized practice, you can book a coaching session with our experienced coaches from McKinsey, BCG, or Bain. They will quickly identify your areas of improvement and help you ace your interview.

Scoring in the McKinsey PSG/Digital Assessment

The scoring mechanism in the McKinsey Digital Assessment

Related product

Thumbnail of Case Interview End-to-End Secrets Program

Case Interview End-to-End Secrets Program

Elevate your case interview skills with a well-rounded preparation package

Profitability is the most common interview case types in MBB & you will most likely face one. Thus profitability framework is a method to solve profit problems

A case interview is where candidates is asked to solve a business problem. They are used by consulting firms to evaluate problem-solving skill & soft skills

An issue tree is a breakdown method of problems into multiple levels of subsets. It will isolates the root causes and ensures impactful solutions to the problem

Hacking The Case Interview

Hacking the Case Interview

Case interview frameworks

Case interview frameworks or consulting frameworks are arguably the most critical component of a case interview. Outstanding case frameworks   set you up for success for the case while poor frameworks make the case difficult to solve.

Struggling on how to use frameworks in your case interviews? Unsure of which frameworks to use?

Don't worry because we have you covered! We'll teach you step-by-step, how to craft tailored and unique frameworks for any case interview situation.

By the end of this article, you will learn four different strategies on how to create unique and tailored frameworks for any case interview.

Strategy #1: Creating Frameworks from Scratch

  • Strategy #2: Memorizing 8 – 10 Broad Business Areas
  • Strategy #3: Breaking Down Stakeholders
  • Strategy #4: Breaking Down Processes
  • Strategy #5: Two-Part MECE Frameworks

You will apply these strategies to learn how to create case frameworks for the six most common types of case interviews.

Profitability Framework

Market entry framework, merger and acquisition framework, pricing framework, new product framework, market sizing framework.

You will also learn six consulting frameworks that nearly every consultant knows.

Porter’s Five Forces Framework

Swot framework, 4 p’s framework, 3 c’s / business situation framework, bcg 2x2 matrix framework, mckinsey 7s framework.

If you’re looking for a step-by-step shortcut to learn case interviews quickly, enroll in our case interview course . These insider strategies from a former Bain interviewer helped 30,000+ land consulting offers while saving hundreds of hours of prep time.

What is a Case Interview Framework?

A case interview framework is simply a tool that helps you structure and break down complex problems into simpler, smaller components. Think of a framework as brainstorming different ideas and organizing them into different categories.

Let’s look at an example: Coca-Cola is a large manufacturer and retailer of non-alcoholic beverages, such as sodas, juices, sports drinks, and teas. They are looking to grow and are considering entering the beer market in the United States. Should they enter?

In order for you to decide whether Coca-Cola should enter the beer market, you likely have many different questions you’d like to ask:

  • Does Coca-Cola know how to produce beer?
  • Would people buy beer made by Coca-Cola?
  • Where would Coca-Cola sell its beer?
  • How much would it cost to enter the beer market?
  • Will Coca-Cola be profitable from selling beer?
  • How would Coca-Cola outcompete competitors?
  • What is the size of the beer market in the United States?

This is not a very structured way of thinking through the case. The questions are listed in no particular order. Additionally, many of the questions are similar to one another and could be grouped together.

A case framework would provide a structure to organize these ideas and questions in a way that is easy to understand.

A framework for this case might look like the following.

Framework Example

Notice that we have simplified the list of questions we had into four main categories. These broad categories are frequently called framework “buckets.” Also notice that we have grouped similar questions together under each framework bucket.

This case framework tells us what areas we need to explore in order to make a recommendation to Coca-Cola. It also clearly shows what questions we need to answer under each area.

This is the power of a case interview framework. It simplifies a complex business problem into smaller and separate components that we can tackle one at a time.

So how do you develop a case framework? The next section will reveal four robust strategies for creating unique and tailored consulting frameworks for any case interview.

Case Interview Framework Strategies

There are four case interview framework strategies you should have in your toolkit:  

When given a case interview, you will need to decide which framework strategy you want to use. Some framework strategies will be more effective than others depending on what type of case interview you get.

Therefore, choose the case framework strategy that is easiest for you given the type of case that you get.

This case framework strategy can be used for any type of case. This is the most time-consuming strategy, but yields case frameworks that are the most tailored and unique for the given case interview.

To create a framework from scratch, ask yourself what 3 – 4 statements must be true for you to be 100% confident in your recommendation. These 3 – 4 areas will become the buckets in your framework.

Once you have your framework buckets, brainstorm a few questions for each bucket that you need answers to.

Let’s return to the Coca-Cola case example in which we are asked to determine whether or not they should enter the beer market. What 3 – 4 statements must be true for us to recommend that Coca-Cola should enter the beer market?

The four major statements that must be true are:

  • The beer market is an attractive market
  • Competitors in the market are weak
  • Coca-Cola has the capabilities to produce outstanding beer
  • Coca-Cola will be highly profitable from entering the beer market

These will be the major areas or buckets in our framework.

Creating Frameworks from Scratch: Framework Areas

Next, let’s add a few bullet points under each area to add more detail to our case framework.

To determine whether the beer market is attractive, we would need to know the market size, the market growth rate, and the average profit margins in the market.

To assess whether the market is competitive, we would need to know who the competitors are, how much market share they have, and if they have any differentiation or competitive advantages.

To decide whether Coca-Cola has the capabilities to produce beer, we need to know if there are any capability gaps or if there are significant synergies that Coca-Cola can leverage.

Finally, to determine the expected profitability of entering the market, we would need to know what expected revenues are, what expected costs are, and how long it would take Coca-Cola to break even.

This gives us our case framework.

Creating Frameworks from Scratch: Framework Example

You can repeat this process for any case interview that you get to create an outstanding case framework.

Strategy #2: Memorizing 8 – 10 Broad Business Areas to Make a Framework

Creating case frameworks from scratch can be quite time-consuming. Because of this, many interview candidates make the mistake of using memorized frameworks for case interviews.

Candidates will either use a single memorized framework for every case or memorize a different framework for every type of case interview.

The issue with using memorized frameworks is that they aren’t tailored to the specific case you are solving for. When given an atypical business problem, your framework areas or buckets will not be entirely relevant.

A poor framework makes the case interview significantly more difficult to solve.

Additionally, Interviewers can easily tell that you are regurgitating memorized information and not thinking critically.

Instead of creating frameworks from scratch each time, this second case framework strategy provides a method to speed up the process while still creating frameworks that are unique and tailored to the case. Additionally, you won’t need to memorize multiple different frameworks.

First, memorize a list of 8 - 10 broad business areas, such as the following:

Framework Memorizing 8 - 10 Business Areas

When given a case, mentally run through this list and pick the 3 - 5 areas that are most relevant to the case.

This will be your framework.

If the list does not give you enough areas for your framework, brainstorm and add your own ideas as areas to your framework.

Finally, add a few bullet points under each area to add more detail to your case framework.

This strategy guarantees that your framework elements are relevant to the case. It also demonstrates that you can create unique, tailored frameworks for every business problem.

Let’s return to the Coca-Cola case example in which we are asked to determine whether or not they should enter the beer market.

Running through our list of memorized framework areas, the following six areas would be relevant:

  • Market attractiveness : Is the beer market attractive?
  • Competitive landscape : How tough is competition?
  • Company capabilities : Does Coca-Cola have the capabilities to enter the market?
  • Profitability : Will Coca-Cola be profitable from entering the market?
  • Risks : What are the risks of entering the market?
  • Strategic alternatives : Are there other more attractive markets Coca-Cola should enter?

You can pick 3 – 5 of these areas as the basis for your framework.

This strategy is a shortcut for creating unique and tailored frameworks for every business problem. Even if you and a friend used this same strategy, you both may end up with different frameworks.

That is completely fine. As long as the buckets in your framework are major areas and are relevant to the case, your case framework will be significantly better than most candidates’ frameworks.

You do not need to develop a framework entirely from scratch every time to create outstanding case frameworks. This case framework strategy can be applied to over 90% of case interviews.

For the remaining 10% of case interviews, you will need to learn and use the next two case interview framework strategies.

Strategy #3: Breaking Down Stakeholders to Make a Framework

The first two case framework strategies can be applied to over 90% of cases. However, some cases may require you to identify and focus on various stakeholders that are involved in running or operating a business.

For these cases, the primary areas of your case framework will be these major stakeholders.

Let’s take a look at an example: Your client is a non-profit blood bank. They have volunteer nurses that go to schools and companies to collect blood from donors. They then sell this blood to hospitals, which use this blood for emergency situations when a blood transfusion is required. Currently, Hearts4Lives is not profitable because they are not able to collect enough blood to sell to their hospital partners. What can they do to fix this?

This case involves many different stakeholders:

  • Volunteer nurses
  • Blood donors
  • Schools and companies

For cases in which many different stakeholders are involved, it will be useful to look at each stakeholder and determine what each could do to address the problem.

One potential framework could look like the following:

Breaking Down Stakeholders Framework Example

Strategy #4: Breaking Down Processes to make a Framework

Similar to the previous case framework strategy, some cases may require you to focus on improving or optimizing a particular process.

For these cases, the primary areas of your case framework will be each major step of the process.

Let’s take a look at an example: Your client is a waste disposal company that manages a fleet of drivers and garbage trucks that go to residential homes, collect garbage, and then dump the garbage in city landfills. They have an obligation to collect each home’s garbage once a week. Recently, they have been failing to meet this requirement and are backed up with garbage disposal requests. What is causing this issue and what should they do to fix it?

For cases involving processes and efficiencies, it can be helpful to look at the different components or steps in the process.

We can think about the process of collecting and disposing of garbage in the following steps:

  • Get in a garbage truck
  • Drive along a designated route
  • Collect garbage at each stop
  • Dispose of the garbage in the landfill

Using these steps as the primary areas of our framework, we can create the following case framework:

Breaking Down Processes Framework Example

Once you have systematically listed all of the steps in a process, you can identify the pain points or bottlenecks that are causing the issue and determine ways to improve the process.

Strategy #5: Two-part MECE Frameworks

An easy way to make a 100% MECE framework is to use a two-part MECE framework. For the first step, start with a X and Not X framework. Some examples include:

  • Internal / external
  • Short-term / long-term
  • Economic / non-economic
  • Quantitative / qualitative
  • Direct / indirect
  • Supply-side / demand-side
  • Upside / downside
  • Benefits / cost

There are probably hundreds more frameworks that follow this pattern.

These frameworks are by definition 100% MECE. Since all of these frameworks are X or Not-X, they are mutually exclusive. There is no redundancy or overlap between X and Not-X.

Together, X and Not-X are also completely exhaustive. They cover the universe of all ideas and possibilities.

The X and Not-X framework by itself is good enough for a lot of the questions you could get asked in a case interview.

If you’re asked to brainstorm ways to decrease costs, you can create a framework consisting of decreasing variable costs and decreasing non-variable costs, also known as fixed costs.

If you’re asked to brainstorm barriers to entry, you can create a framework consisting of economic barriers to entry, such as cash and equipment, and non-economic barriers to entry, such as brand name or distribution channels.

However, to take your framework to the next level and truly impress your interviewer, we have the option of doing step two.

Step two involves adding another layer of X and Not X into your framework. What do we mean by this?

Let’s say you are trying to help a city decide whether they should host the upcoming summer Olympics. You start off with a framework consisting of benefits and costs. You can take this framework to the next level by adding another layer, such as adding in short-term and long-term.

With this additional layer, your framework now has four categories: short-term benefits, long-term benefits, short-term costs, and long-term costs. This is a 100% MECE framework that enables you to think through all possible considerations in deciding whether a city should host the Olympics.

Let’s look at another example. Suppose you are trying to figure out how to reduce a company’s costs. You start with a framework consisting of variable costs and fixed costs. You can take this framework to the next level by adding another layer, such as direct and indirect.

With this additional layer, your framework now has four categories: ways to directly reduce variable costs, ways to indirectly reduce variable costs, ways to directly reduce fixed costs, and ways to indirectly reduce fixed costs. This is another 100% MECE framework.

Case Frameworks: The 6 Most Common Frameworks

There are six common case frameworks in consulting case interviews.  

Profitability frameworks are the most common types of frameworks you’ll likely use in consulting first round interviews.

A profitability case might look like this: “An electric car manufacturer has recently been experiencing a decline in profits. What should they do?”

There are two steps to solving a profitability case.

First, you need to understand quantitatively, what is the driver causing the decline in profits?

You should know the following basic profit formulas.

Profitability Framework Formulas

Is the decline in profitability due to a decline in revenue, an increase in costs, or both?

On the revenue side, what is causing the decline? Is it from a decrease in quantity of units sold? If so, is the decrease concentrated in a particular product line, geography, or customer segment?

Or is the decline due to a decrease in price? Are we selling products at a lower price? Is there a sales mix change? In other words, are we selling more low-priced products and fewer high-priced products?

On the cost side, what is causing the increase in costs? Is it from an increase in variable costs? If so, which cost elements have gone up?

Or is the increase in costs due to an increase in fixed costs? If so, which fixed costs have gone up?

Next, you need to understand qualitatively, what factors are driving the decline in profitability that you identified in the previous step.

Looking at customers, have customer needs or preferences changed? Have their purchasing habits or behaviors changed? Have their perceptions of the company changed?

Looking at competitors, have new players entered the market? Have existing competitors made any recent strategic moves? Are competitors also experiencing a decline in profitability?

Looking at the market, are there any market trends that we should be aware of? For example, are there new technology or regulatory changes? How do these trends impact profitability?

Putting all of this together, we get the following profitability framework.

Profitability Framework Example

Once you have gone through this profitability framework and understand both quantitatively what is causing the decline in profits and qualitatively why this is happening, you can begin brainstorming ideas to address the profitability issue.

Among the ideas that you brainstorm, you can prioritize which recommendations to focus on based on the level of impact and ease of implementation.

See the video below for an example of how to solve a profitability case using this profitability framework.

Market entry frameworks are the second most common types of frameworks you’ll likely use in consulting first round interviews.

A market entry case might look like this: “Coca-Cola is considering entering the beer market in the United States. Should they enter?”

To create a market entry framework, there are typically four statements that need to be true in order for you to recommend entering the market:

  • The market is attractive
  • Competition is weak
  • The company has the capabilities to enter
  • The company will be highly profitable from entering the market

These statements form the foundation of our market entry framework.

Market Entry Framework Example

Note the logical order of the buckets in the framework.

We first want to determine whether the market is attractive. Then, we need to check if competition is weak and if there is an opportunity to capture meaningful market share.

If these two conditions are true, then we need to confirm that the company actually has the capabilities to enter the market.

Finally, even if the company has the capabilities to enter the market, we need to verify that they will be profitable from entering.

This is a logical progression that your market entry framework will take you through to develop a recommendation for market entry cases.

Merger and acquisition frameworks are also common frameworks you’ll use in consulting interviews.

There are two common business situations.

The first situation is a company looking to acquire another company in order to access a new market, access new customers, or to grow its revenues and profits.

Another situation is a private equity company looking to acquire a company as an investment. Their goal is to then grow the business using their operational expertise and then sell the company years later for a high return on investment.

In either of these situations, mergers and acquisition cases typically involve acquiring an attractive, successful company.

It is rare to get a case in which a company or private equity firm is looking to acquire a poorly performing company to purchase at a discount. Nevertheless, you can always clarify the goal of the merger or acquisition with the interviewer before beginning the case.

In order to recommend making an acquisition, four statements need to be true.  

  • The market that the acquisition target is in is attractive
  • The acquisition target is an attractive company
  • The acquisition generates meaningful synergies
  • The acquisition target is at a great price and will generate high returns on investment

These statements become the basis of our merger and acquisition framework.

Merger and Acquisition Framework Example

Synergies is an area that should absolutely be included in any merger or acquisition framework. A merger or acquisition can lead to revenue synergies and cost synergies.

Revenue synergies include:

  • Having access to new customer segments
  • Having access to new markets
  • Having access to new distribution channels
  • Cross-selling opportunities
  • Up-selling opportunities

Cost synergies include:

  • Eliminating cost redundancies
  • Consolidating functions or groups
  • Increasing buying power with suppliers, manufacturers, distributors, or retailers

Pricing frameworks are used in cases involving the pricing of a product or service. To develop a pricing framework, you should be familiar with the three different ways to price a product or service.

  • Pricing based on costs : set a price by applying a profit margin on the total costs to produce or deliver the product or service
  • Pricing based on competition : set a price based on what competitors are charging for products similar to yours
  • Pricing based on value added : set a price by quantifying the benefits that the product provides customers

Your answer to pricing cases will likely involve a mix of all three of these pricing strategies.

Your pricing framework will look something like the following.

Pricing Framework Example

Pricing based on costs will determine the minimum price you can realistically set. Pricing based on value added will determine the maximum possible price. Pricing based on competition will determine which price in between these two price points you should set.

In order to get customers to purchase your product, the difference between your price point and the customer’s maximum willingness to pay must be greater than or equal to the difference between your competitor’s price point and the customer’s maximum willingness to pay for their product.

New product frameworks are used to help a company decide whether or not to launch a product or service.

New product frameworks share many similarities with market entry frameworks. In order to recommend launching a new product, the following statements would need to be true:

  • The product targets an attractive market segment
  • The product meets customer needs and is superior to competitor products
  • The company has the capabilities to successfully launch the product
  • Launching the product will be highly profitable

Expanding on these areas, your new product framework could look like the following:

New Product Framework Example

A comprehensive guide to market sizing questions and market sizing frameworks can be found in our comprehensive market sizing article. You can also watch the video below:

As a summary, market sizing or estimation questions ask you to determine the size of a particular market or to estimate a particular figure.

There are two different market sizing frameworks or approaches:

  • Top-down approach : start with a large number and then refine and break down the number until you get your answer
  • Bottom-up approach : start with a small number and then build up and increase the number until you get your answer

To create your market sizing framework, simply write out in bullet points, the exact steps you would take to calculate the requested market size or estimation figure.

Consulting Frameworks Every Consultant Knows

There are six consulting frameworks that nearly every consultant knows.

I would not recommend using these exact frameworks during a case interview because the interviewer may think you are just regurgitating memorized information instead of thinking critically about the case.

Instead use the four framework strategies that we covered earlier in this article to create tailored and unique frameworks for each case.

Nevertheless, it is helpful to review these common consulting frameworks in order to understand the fundamental concepts and business principles behind them.

Porter’s Five Forces framework was developed by Harvard Business School professor Michael Porter. This framework is used to analyze the attractiveness of a particular industry.

There are five forces that determine whether an industry is attractive or unattractive.

Porter's Five Forces Framework

Competitive rivalry:  How competitive is the industry?

The more competitive an industry is in terms of number and strength of competitors, the less attractive the industry is. The less competitive an industry is, the more attractive the industry is.

Supplier power:  How much power do suppliers have?

Suppliers are companies that provide the raw materials for your company to produce goods or services. The fewer suppliers there are, the more bargaining power suppliers have in setting prices. The more suppliers there are, the weaker bargaining power suppliers have in setting prices.

Therefore, high supplier power makes the industry less attractive while low supplier power makes the industry more attractive.   

Buyer power:  How much power do buyers have?

Buyers are customers or companies that purchase your company’s product. The more buyers there are, the weaker bargaining power buyers have in setting prices. The fewer buyers there are, the more bargaining power buyers have in setting prices.

Therefore, high buyer power makes the industry less attractive while low buyer power makes the industry more attractive.   

Threat of substitution:  How difficult is it for customers to find and use substitutes over your product?

The availability of many substitutes makes the industry less attractive while a lack of substitutes makes the industry more attractive

Threat of new entry:  How difficult is it for new players to enter the market?

If barriers to entry are high, then it is difficult for new players to enter the market and it is easier for existing players to maintain their market share.

If barriers to entry are low, then it is easy for new players to enter the market and more difficult for existing players to maintain their market share.

A low threat of new entrants makes the market more attractive while a high threat of new entrants makes the market less attractive.

A SWOT framework is used to assess a company’s strategic position. SWOT stands for strengths, weaknesses, opportunities, and threats.

SWOT Framework

Strengths : What does the company do well? What qualities separate them from competitors?

Weaknesses : What does the company do poorly? What are the things that competitors do better?

Opportunities : Where are the company’s opportunities for growth or improvement?

Threats : Who are the most threatening competitors? What are the major risks to the company’s business?

The 4 P’s framework is used to develop a marketing strategy for a product. The 4 P’s in this framework are: product, place, promotion, and price.

4 P's Framework

Product : If there are multiple products or different versions of a product, you will need to decide which product to market. To do this, you will need to fully understand the benefits and points of differentiation of each product.

Select the product that best fits customer needs for the customer segment you are focusing on.

Place : You will need to decide where the product will be sold to customers. Different customer segments have different purchasing habits and behaviors. Therefore, some distribution channels will be more effective than others.

Should the product be sold directly to the customer online? Should the product be sold in the company’s stores? Should the product be sold through retail partners instead?

Promotion : You will need to decide how to spread information about the product to customers. Different customer segments have different media consumption habits and preferences. Therefore, some promotional strategies will be more effective than others.

Promotional techniques and strategies include advertising, social media marketing, email marketing, search engine marketing, video marketing, and public relations. Select the strategies and techniques that will be the most effective.

Price : You will need to decide how to price the product. Pricing is important because it determines the profits and the quantity of units sold. Pricing can also communicate information on the quality or value of the product.

If you price the product too high, you may be pricing the product above your customer segment’s willingness to pay. This would lead to lost sales.

If you price the product too low, you may be losing potential profit from customers who were willing to pay a higher price. You may also be losing profits from customers who perceive the product as low-quality due to a low price point.

In deciding on a price, you can consider the costs to produce the product, the prices of other similar products, and the value that you are providing to customers.

The 3 C’s framework is used to develop a business strategy for a company. 3 C’s stands for customers, competition, and company.

The business situation framework was developed by a former McKinsey consultant, Victor Cheng, who added a fourth component to this framework, product.

Both of these frameworks are used to develop a business strategy for a company in a variety of situations, such as market entry, new product launch, and acquisition.

3 C's Business Situation Framework

The BCG 2x2 Matrix Framework was developed by BCG founder Bruce Hendersen. It is used to examine all of the different businesses of a company to determine which businesses the company should invest in and focus on.

The BCG 2x2 Matrix has two different dimensions:

  • Market growth : How quickly is the market growing?
  • Relative market share : How much market share does the company have compared to competitors?

Each business of the company can be assessed on these two dimensions on a scale of low to high. This is what creates the 2x2 Matrix because it creates four different quadrants.

BCG 2x2 Matrix Framework

Each quadrant has a recommended strategy.

  • Stars : These are businesses that have high market growth rate and high relative market share. These businesses should be heavily invested in so they can continue to grow.
  • Cows :   These are businesses that have low market growth rate, but high relative market share. These businesses should be maintained since they are stable, profitable businesses.
  • Dogs :   These are businesses that have low market growth rate and low relative market share. These businesses should not be invested in and should possibly even be divested to free up cash for other businesses.
  • Unknown : These are businesses that have high market growth rate and low relative market share. The strategy for these businesses is not clear. With enough investment, these businesses could become stars. However, these businesses could also become dogs if the market growth slows or declines.

The McKinsey 7S Framework was developed by two former McKinsey consultants, Tom Peters and Robert Waterman. The 7S Framework identifies seven elements that a company needs to align on in order to be successful.

McKinsey 7S Framework

These elements are:

  • Strategy : The company’s plan to grow and outcompete competitors
  • Structure : The organization of the company
  • Systems : The company’s daily activities and processes
  • Shared values : The core beliefs, values, or mission of the company
  • Style : The style of leadership or management used
  • Staff : The employees that are hired
  • Skills : The capabilities of the company’s employees

Land your Dream Consulting Job

Here are the resources we recommend to learn the most robust, effective case interview strategies in the least time-consuming way:

  • Comprehensive Case Interview Course (our #1 recommendation): The only resource you need. Whether you have no business background, rusty math skills, or are short on time, this step-by-step course will transform you into a top 1% caser that lands multiple consulting offers.
  • Hacking the Case Interview Book   (available on Amazon): Perfect for beginners that are short on time. Transform yourself from a stressed-out case interview newbie to a confident intermediate in under a week. Some readers finish this book in a day and can already tackle tough cases.
  • The Ultimate Case Interview Workbook (available on Amazon): Perfect for intermediates struggling with frameworks, case math, or generating business insights. No need to find a case partner – these drills, practice problems, and full-length cases can all be done by yourself.
  • Case Interview Coaching : Personalized, one-on-one coaching with former consulting interviewers
  • Behavioral & Fit Interview Course : Be prepared for 98% of behavioral and fit questions in just a few hours. We'll teach you exactly how to draft answers that will impress your interviewer
  • Resume Review & Editing : Transform your resume into one that will get you multiple interviews

Land Multiple Consulting Offers

Complete, step-by-step case interview course. 30,000+ happy customers.

PrepLounge Logo

Identify Your Case Type

Market sizing.

Learn more about Market Sizing Questions and how to approach them in Case Interviews. The Case Interview Basics at PrepLounge offer you everything you need!

Market Entry

Market Entry may be a great solution to apply in your Case Interview if your client is searching for growth alternatives. Learn how to work a Market Entry Case

Profitability Case

Learn how to solve Profitability Cases in your consulting interview when you are applying for a job in one of the biggest accounting firms!

Growth Strategy

Learn everything about the Growth Strategies for your case interview while applying for a job in consulting or in a big accounting firm.

M&A is often the answer to broader problems presented in your case studies. Learn the Key areas to analyze: assets, target, industry, and feasibility!

Competitive Response

You have to analyze how your customer should react to the strategy of a major competitor? Learn everything about competitive response cases now.

Pricing case studies can either stand alone or be a part of another case study. Learn how to crack your case in three steps.

In case studies, you can for example use the discounted cash flow method to solve valuation cases. You can find modified solution approaches here.

Brainteaser

Brainteaser are used to assess your ability to think quickly and out-of-the-box in job and case interviews. Prepare to solve them now.

consulting case study types

The New Equation

consulting case study types

Executive leadership hub - What’s important to the C-suite?

consulting case study types

Tech Effect

consulting case study types

Shared success benefits

Loading Results

No Match Found

PwC case studies

Examples of how a community of solvers brings together the strengths of people and technology to build trust and deliver sustainable outcomes — bringing The New Equation to life.

Featured - 3 items

Reinventing wyndham’s loyalty program technology.

Redesigning the cloud-based ecosystem powering Wyndham Rewards.

Helping the YMCA of GNY meet new community needs

Responding to change and expanding their reach and ability to support.

Baker Hughes is working toward net zero at scale

Learn how PwC helped Baker Hughes accelerate their net zero strategy.

A brighter future for medicine with healthcare technology

A collaboration between OSIC, PwC and Microsoft is helping patients, providers and researchers fight a rare disease.

{{filterContent.facetedTitle}}

  • {{v.tagsTitle}}

{{item.title}}

  • {{filterContent.dataService.numberHits}} {{filterContent.dataService.numberHits == 1 ? 'result' : 'results'}}
  • {{vf.elipsedTagsTitle}}
  • 0" ng-click="filterContent.reset()" class="reset-filters"> {{filterContent.resetFiltersLabel}}

{{item.publishDate}}

{{item.text}}

Explore further

Linkedin Follow

Thank you for your interest in PwC

We have received your information. Should you need to refer back to this submission in the future, please use reference number "refID" .

Required fields are marked with an asterisk( * )

Please correct the errors and send your information again.

By submitting your email address, you acknowledge that you have read the Privacy Statement and that you consent to our processing data in accordance with the Privacy Statement (including international transfers). If you change your mind at any time about wishing to receive the information from us, you can send us an email message using the Contact Us page.

© 2017 - 2024 PwC. All rights reserved. PwC refers to the PwC network and/or one or more of its member firms, each of which is a separate legal entity. Please see www.pwc.com/structure for further details.

  • Data Privacy Framework
  • Cookie info
  • Terms and conditions
  • Site provider
  • Your Privacy Choices

47 case interview examples (from McKinsey, BCG, Bain, etc.)

Case interview examples - McKinsey, BCG, Bain, etc.

One of the best ways to prepare for   case interviews  at firms like McKinsey, BCG, or Bain, is by studying case interview examples. 

There are a lot of free sample cases out there, but it's really hard to know where to start. So in this article, we have listed all the best free case examples available, in one place.

The below list of resources includes interactive case interview samples provided by consulting firms, video case interview demonstrations, case books, and materials developed by the team here at IGotAnOffer. Let's continue to the list.

  • McKinsey examples
  • BCG examples
  • Bain examples
  • Deloitte examples
  • Other firms' examples
  • Case books from consulting clubs
  • Case interview preparation

Click here to practise 1-on-1 with MBB ex-interviewers

1. mckinsey case interview examples.

  • Beautify case interview (McKinsey website)
  • Diconsa case interview (McKinsey website)
  • Electro-light case interview (McKinsey website)
  • GlobaPharm case interview (McKinsey website)
  • National Education case interview (McKinsey website)
  • Talbot Trucks case interview (McKinsey website)
  • Shops Corporation case interview (McKinsey website)
  • Conservation Forever case interview (McKinsey website)
  • McKinsey case interview guide (by IGotAnOffer)
  • McKinsey live case interview extract (by IGotAnOffer) - See below

2. BCG case interview examples

  • Foods Inc and GenCo case samples  (BCG website)
  • Chateau Boomerang written case interview  (BCG website)
  • BCG case interview guide (by IGotAnOffer)
  • Written cases guide (by IGotAnOffer)
  • BCG live case interview extract (by IGotAnOffer) - See below

3. Bain case interview examples

  • CoffeeCo practice case (Bain website)
  • FashionCo practice case (Bain website)
  • Associate Consultant mock interview video (Bain website)
  • Consultant mock interview video (Bain website)
  • Written case interview tips (Bain website)
  • Bain case interview guide   (by IGotAnOffer)
  • Bain case mock interview with ex-Bain manager (below)

4. Deloitte case interview examples

  • Engagement Strategy practice case (Deloitte website)
  • Recreation Unlimited practice case (Deloitte website)
  • Strategic Vision practice case (Deloitte website)
  • Retail Strategy practice case  (Deloitte website)
  • Finance Strategy practice case  (Deloitte website)
  • Talent Management practice case (Deloitte website)
  • Enterprise Resource Management practice case (Deloitte website)
  • Footloose written case  (by Deloitte)
  • Deloitte case interview guide (by IGotAnOffer)

5. Accenture case interview examples

  • Case interview workbook (by Accenture)
  • Accenture case interview guide (by IGotAnOffer)

6. OC&C case interview examples

  • Leisure Club case example (by OC&C)
  • Imported Spirits case example (by OC&C)

7. Oliver Wyman case interview examples

  • Wumbleworld case sample (Oliver Wyman website)
  • Aqualine case sample (Oliver Wyman website)
  • Oliver Wyman case interview guide (by IGotAnOffer)

8. A.T. Kearney case interview examples

  • Promotion planning case question (A.T. Kearney website)
  • Consulting case book and examples (by A.T. Kearney)
  • AT Kearney case interview guide (by IGotAnOffer)

9. Strategy& / PWC case interview examples

  • Presentation overview with sample questions (by Strategy& / PWC)
  • Strategy& / PWC case interview guide (by IGotAnOffer)

10. L.E.K. Consulting case interview examples

  • Case interview example video walkthrough   (L.E.K. website)
  • Market sizing case example video walkthrough  (L.E.K. website)

11. Roland Berger case interview examples

  • Transit oriented development case webinar part 1  (Roland Berger website)
  • Transit oriented development case webinar part 2   (Roland Berger website)
  • 3D printed hip implants case webinar part 1   (Roland Berger website)
  • 3D printed hip implants case webinar part 2   (Roland Berger website)
  • Roland Berger case interview guide   (by IGotAnOffer)

12. Capital One case interview examples

  • Case interview example video walkthrough  (Capital One website)
  • Capital One case interview guide (by IGotAnOffer)

13. Consulting clubs case interview examples

  • Berkeley case book (2006)
  • Columbia case book (2006)
  • Darden case book (2012)
  • Darden case book (2018)
  • Duke case book (2010)
  • Duke case book (2014)
  • ESADE case book (2011)
  • Goizueta case book (2006)
  • Illinois case book (2015)
  • LBS case book (2006)
  • MIT case book (2001)
  • Notre Dame case book (2017)
  • Ross case book (2010)
  • Wharton case book (2010)

Practice with experts

Using case interview examples is a key part of your interview preparation, but it isn’t enough.

At some point you’ll want to practise with friends or family who can give some useful feedback. However, if you really want the best possible preparation for your case interview, you'll also want to work with ex-consultants who have experience running interviews at McKinsey, Bain, BCG, etc.

If you know anyone who fits that description, fantastic! But for most of us, it's tough to find the right connections to make this happen. And it might also be difficult to practice multiple hours with that person unless you know them really well.

Here's the good news. We've already made the connections for you. We’ve created a coaching service where you can do mock case interviews 1-on-1 with ex-interviewers from MBB firms . Start scheduling sessions today!

The IGotAnOffer team

Interview coach and candidate conduct a video call

Golden Ticket Challenge: Win a FREE seat to master MBB Interviews at our Consulting Bootcamp. 🎫 Learn More

logo

What Are The Different Types of Consulting Case Study Interviews?

Published on January 8, 2024 | by - High Bridge Academy

Are you preparing for a consulting interview and wondering what to expect? Consulting case study interviews are a crucial part of the selection process and can make or break your chances of landing the job. 

In this article, we will explore the various types of case study interviews that you may encounter during a consulting interview. By understanding the different types of cases and their frameworks, you can better prepare and increase your chances of acing the interview.

Whether you’re a seasoned consultant or new to the game, it’s essential to be well-versed in case interview types, types of questions, and consulting case interview structures to succeed. We’ve got you covered.

An Introduction to Case Interviews and Frameworks

Before delving into the specifics of each type of case study, it’s important to understand the basics of case interviews and how frameworks can help you approach them.

A case interview is a problem-solving exercise where you are presented with a business problem and are expected to analyze and provide recommendations. 

This type of interview is popular among consulting firms like McKinsey , BCG , and Bain , and is used to test your problem-solving, critical thinking, and communication skills.

Frameworks provide a structured approach to tackle these cases, helping you organize your thoughts and provide a clear, logical solution. 

Using a framework ensures that you cover all the necessary points and approach the problem in a structured manner. 

Remember that while frameworks can be helpful, they are simply a tool, and you should adapt them to suit the specific case.

By understanding case interview basics and using frameworks, you’ll be better equipped to solve a case on the spot during your consulting interview.

Market Sizing Cases

Market sizing cases are a type of consulting case study interview that involves estimating the size of a market or segment. 

These cases test your ability to analyze data and make reasonable assumptions to come up with a logical estimate.

Market sizing questions may include:

  • What is the size of the market for a new product or service?
  • What is the market share of a company in a specific industry?
  • How much revenue can a company generate by entering a new market?

Market sizing cases require you to gather relevant data, such as industry reports, customer surveys, and sales data, and use it to make assumptions and calculations. You may also need to use a specific formula or framework to arrive at your estimate.

Having a deep understanding of market sizing and how to approach these types of questions can set you apart in a consulting interview and demonstrate your analytical skills to potential employers.

Profitability Analysis Cases

Profitability analysis cases are an essential part of consulting case interviews. The goal of these cases is to evaluate the financial performance of a business or product. 

You will need to analyze revenue, costs, and related factors to determine the profitability of a specific scenario.

Variable costs and cost structure are of particular importance in these cases. You may be asked to optimize pricing strategies or identify areas for improvement and profitability growth. 

For example, suppose a company wants to increase profitability by implementing a higher price for a product. In that case, you may need to analyze the market demand, production costs, and pricing strategies to determine the feasibility of such a plan.

By demonstrating your ability to perform a comprehensive profitability analysis, you can showcase your strategic thinking and financial analysis skills.

Market Entry and Expansion Cases

If you’re looking to expand your business, entering a new market may be the next step. Market entry and expansion cases are aimed to test your knowledge about assessing the feasibility and strategy behind this process. 

Your task is to analyze the potential risks and rewards of entering a new market, make strategic recommendations, and develop a market entry strategy.

You will also need to conduct comprehensive competitor analysis and evaluate market research to provide informed recommendations. Prepare to answer market entry questions, such as “How big is the target market?”, “What barriers to entry exist?”, or “What risks and rewards come with entering a new market?”

It’s worth noting that expanding into a new market is challenging but can provide significant growth opportunities. Common market entry cases include new market analysis, go-to-market strategy formation, and foreign market entry strategy formation.

When tackling a market entry case, you’ll need to have a strong understanding of the target market for your product or service. In addition, you’ll need to develop a comprehensive market entry strategy to penetrate the new market, considering factors such as demographics, cost structures, and competitive landscape. Using competitor analysis and market research can help you identify further potential challenges and opportunities.

Table: Example Market Entry and Expansion Case Framework

By understanding the key components of market entry and expansion cases, you can ensure you are adequately prepared to take on these challenging consulting interview questions.

Merger and Acquisition (M&A) Cases

consulting case study types

Merger and acquisition (M&A) cases are a common type of case study interview in the consulting industry. 

Companies often consider mergers or acquisitions as a way to grow their business, acquire new technologies, or increase market share. 

As a consultant, it’s important to assess the financial, operational, and strategic aspects of a potential merger or acquisition, including cash flow, valuation, and potential synergies or risks associated with the transaction. 

Understanding the different types of acquirers is also important, including strategic buyers, financial buyers, and synergistic buyers.

When tackling an M&A case, it’s important to consider the goals of the client company and how the merger or acquisition aligns with their overall business strategy. 

You may also need to conduct market research and competitive analysis to determine the potential impact on the market and the target company’s competitors. 

By evaluating various factors and developing a cohesive strategy, you can provide valuable insights and recommendations to your client.

Growth and Expansion Cases

Growth and expansion cases are all about finding new strategies for achieving business growth. As a consultant, you will be presented with a business problem or challenge, and you will need to come up with creative solutions to overcome it.

You may be asked to introduce a new product or service to your client’s portfolio, helping them to access new markets or improve existing processes. 

Alternatively, you may be tasked with developing a customized growth strategy to drive long-term success. 

In either case, the success of your recommendations will largely depend on your ability to analyze data effectively, identify new opportunities, and weigh up the potential risks and rewards of each option.

To excel in growth and expansion cases, you will need to be highly adaptable, with a keen eye for detail and an analytical mind. 

As a consultant, you will need to draw on your knowledge of management consulting and your experience working with diverse clients to develop strategies that really work.

Real-Life Consulting Examples and Common Questions

Practice makes perfect, and this couldn’t be more true for mastering your consulting case interview skills. 

Leveraging real-life consulting projects and case studies, as well as practicing different types of case questions, will help you improve your problem-solving abilities.

Common Types of Consulting Cases

In consulting, various types of cases are commonly encountered , each requiring a unique approach and strategic analysis. The table below outlines the most common types of consulting cases, providing a brief description of their focus and objectives:

Real Interview Questions

Similar questions may appear in different case types, so it’s important to have a holistic understanding of case topics and types. Here’s a list of commonly asked questions:

  • What is your overall approach to solving a case?
  • What would you say is the most important factor to consider in this case?
  • How would you determine whether or not to enter a new market?
  • What is the best pricing strategy for this product?
  • What is the main driver of profitability for this business?
  • What are the unique challenges associated with this case?

Remember, consulting case studies are designed to test your business acumen and problem-solving abilities. 

With multiple consulting case interview practice cases, you can hone your skills and perform your best in real interviews. Aspiring consultants can take advantage of High Bridge Academy’s tailored programs for case interview preparation, where they can learn to apply these frameworks effectively under interview conditions.

Now that you have a better understanding of the different types of consulting case study interviews, you can approach your consulting interviews with confidence. 

Remember to use frameworks to structure your analysis and develop strong problem-solving skills. 

Practice with real-life examples and common questions that interviewers may ask to improve your performance. 

Consulting interviews can be challenging, but with the right preparation, you can ace them. Good luck in your consulting interview preparation!

What types of case study interviews can I expect in a consulting interview?

In a consulting interview, you may encounter various types of case study interviews, including market sizing cases, profitability analysis cases, market entry and expansion cases, merger and acquisition (M&A) cases, and growth and expansion cases.

What is a case interview, and why are frameworks important?

A case interview is a problem-solving exercise where you analyze and provide recommendations for a business problem. Frameworks provide a structured approach to tackle these cases, helping you organize your thoughts and provide a clear, logical solution.

What are market sizing cases?

Market sizing cases involve estimating the size of a market or segment. Examples include determining the market size for a new product or service, estimating market share, or analyzing potential growth opportunities in a new market.

What are profitability analysis cases?

Profitability analysis cases focus on assessing the financial performance of a business or product. These cases often involve evaluating variable costs, optimizing pricing strategies, or analyzing the cost structure to identify areas for improvement and profitability growth.

What are market entry and expansion cases?

Market entry and expansion cases examine the feasibility and strategy behind entering a new market or expanding an existing one. You will be asked to assess the potential risks and rewards, develop a market entry strategy, conduct competitor analysis, and evaluate market research.

What are merger and acquisition (M&A) cases?

M&A cases explore the strategic decision-making process behind a merger or acquisition. You will need to evaluate the financial, operational, and strategic aspects, assess cash flow, calculate valuation, and identify potential synergies or risks associated with the transaction.

What are growth and expansion cases?

Growth and expansion cases focus on identifying growth strategies and opportunities for a business. You will be presented with a business problem or challenge and will need to come up with creative solutions to drive growth, such as introducing a new product or service, expanding into new markets, or improving existing processes.

Where can I find real-life consulting examples and common questions?

To get a better understanding of these case study interviews, you can explore real-life consulting examples and common questions that candidates may encounter during their interviews. Practice cases and resources are available online and in consulting prep materials.

What is the importance of understanding the different types of case study interviews?

Understanding the different types of case study interviews is crucial for your interview preparation. It helps you familiarize yourself with the specific frameworks and approaches required for each case type, increasing your chances of success in consulting interviews.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

#ezw_tco-2 .ez-toc-widget-container ul.ez-toc-list li.active:before{background-color:#b5b5b5} Main Topic

Management consulting.

Prepare for your consulting interviews. Work on the world’s most challenging problems. Deliver transformation and craft a powerful story.

TECHNOLOGY FOR MANAGERS

Not everyone needs to write code. But you should be on top of the latest technology trends.

Start with an idea. Leave with a validated roadmap to build your company.

Request Pricing

Error: Contact form not found.

Busy Now? Send this page to your email for later.

[dynamichidden emailsubmit "Email Submit"]

What else would you like to see in the High Bridge Program?

We are building it for you. what you tell us has true impact..

[dynamichidden feedbackform "Feedback Form"]

Tuition Fee at High Bridge is payable only if you successfully land a job. Check current conditions in our brochure.

Total fees for 2020 including courses, mentorship and accommodation, for summer 2020 high bridge is offering 20 to 80% scholarships to high potential students..

Have you heard about our Ambassadors Program? You can event attend High Bridge for free.

Join our next free online workshop by Flavio Soriano, ex-McKinsey consultant and Founder at High Bridge.

Flavio

Free Live Workshop

In the 1%: unveiling who succeeds at mbb and why.

In English Oct. 21, 3 PM CEST

In Portuguese Oct. 21, 3 PM BRT

Give Your Feedback

Case Studies

Banking on innovation: How ING uses generative AI to put people first

Banking on innovation: How ING uses generative AI to put people first

consulting case study types

From farm to tablet: Building a new business to solve an old challenge

Rewired book logo - tangled yellow, red, purple, green, and blue wires meshing together into one solid blue line

Rewired in action

Kiwibank staff helping customers using a tablet

Kiwibank: Building a better bank for the future of New Zealanders

Overhead night-sky view of a large metropolis

Xcel Energy: Driving towards net zero with the power of digital

Old State House, Boston National Historical Park - stock photo

Partnering on America’s toughest challenges

Made in Africa: Catalyzing stronger, sustainable, and inclusive economies

Made in Africa: Catalyzing stronger, sustainable, and inclusive economies

Young African American biochemist using microscope while working on scientific research in a laboratory.

Charles River Labs: Accelerating drug development as a digitally-enabled trusted partner

How a government agency is preparing workers to thrive in the skills-based economy

How a government agency is preparing workers to thrive in the skills-based economy

consulting case study types

How a global components manufacturer built an ambitious carbon reduction roadmap

How a major New Zealand retailer reinvented itself around customer satisfaction

How a major New Zealand retailer reinvented itself around customer satisfaction

How a logistics company digitally transformed amidst a global supply chain crisis

Undaunted by global disruption, a logistics company embraces bold transformation

How 988 is helping reimagine the way the US handles behavioral health crises

988: Three digits and the nationwide effort to help millions in crisis

consulting case study types

An AI power play: Fueling the next wave of innovation in the energy sector

How a manufacturing moonshot was made

How a manufacturing moonshot was made

consulting case study types

Protecting workers through award-winning design

How Telkomsel transformed to reach Gen Z

How Telkomsel transformed to reach digital-first consumers

Flying across the sea, propelled by AI

Flying across the sea, propelled by AI

How a steel plant in India tapped the value of data—and won global acclaim

How a steel plant in India tapped the value of data—and won global acclaim

How will real estate be different in the next normal?

Reimagining the real estate industry for the next normal

Inside a mining company’s AI transformation

Inside a mining company’s AI transformation

New at mckinsey blog.

Technician works inside machinery

JobsOhio and the long-term, innovative revitalization of a state’s economy

Worker with laptop adjusting solar panels

McKinsey’s new Sustainability Academy helps clients upskill workers for the net-zero transition

Two people working on code in a modern office.

Tearing the ‘paper ceiling’: McKinsey supports effort driving upward mobility for millions of workers

IMAGES

  1. How to Customize a Case Study Infographic With Animated Data

    consulting case study types

  2. consulting case study types

    consulting case study types

  3. Case Interview Frameworks: The Ultimate Guide (2022)

    consulting case study types

  4. Tipos de estudios de casos Mapa mental

    consulting case study types

  5. Common Types Of Consulting Case Questions Market Sizing And More

    consulting case study types

  6. Advantages And Disadvantages Of Case Study

    consulting case study types

VIDEO

  1. Case Studies

  2. Case Studies

  3. Strategy & consulting Case Study

  4. Case Studies

  5. CASE STUDY COM165 VIDEO PRESENTATION

  6. Python Function

COMMENTS

  1. Consulting Case Study Types

    Here are the eight primary types of Business Situation Case Studies as we see them: Profitability Optimization Pricing Optimization Industry Landscape & Competitor Dynamics New Product or Project Growth Plan/Strategy Market Entry or Expansion Merger/Acquisition/Joint Venture Start-Up/Early-Stage Venture

  2. Common Case Interview Types: Market-sizing, Revenue Growth & More

    My Case Interview Types: Master Common Ones Before Your Interview Back to all Last Updated January, 2024 Rebecca Smith-Allen Former McKinsey Engagement Manager On Case Study Preparation, we described what a case interview question is and how you should approach answering one.

  3. Case Interview: all you need to know (and how to prepare)

    1. The key to landing your consulting job. Case interviews - where you are asked to solve a business case study under scrutiny - are the core of the selection process right across McKinsey, Bain and BCG (the "MBB" firms).

  4. 6 Types of Case Interviews

    Two case interview styles exist: Interviewer-led (used at McKinsey) and interviewee-led (used almost everywhere else). When we coach candidates 1:1, we will focus on the differences in great detail - but that's not the point of this article. Within both case styles, you will encounter a variety of case interview types.

  5. Case Interview Frameworks: Ultimate Guide

    Case Interview Frameworks: Ultimate Guide Updated February 06, 2024 The case interview is the ultimate challenge for most consulting candidates. Whether you're just starting your preparation or you are 30 practice cases in, it's always helpful to familiarize yourself with the most popular case interview frameworks.

  6. 9 Types of Questions in Actual Case Interviews

    1. Framework/issue tree questions 2. Market-sizing and guesstimate questions 3. Valuation questions 4. Brain teaser questions 5. Chart insight questions 6. Value proposition questions 7. Information questions 8. Math problems 9. Solution-finding questions

  7. Case Interview Prep: Master the 4 Parts of the Consulting Case

    A Case Study Interview is a real-time problem-solving test used to screen candidates for their ability to succeed in consulting. The case is presented as an open-ended question, often a problem that a specific type of business is facing, that an interviewer asks a candidate to solve.

  8. Case Interview 101: The Online Guidebook

    Generally, there are 2 styles of conducting cases: Candidate-led and Interviewer-led. Candidate-led cases On this end, the interviewer rarely intervenes; the candidate will lead the approach from structuring the problem, drawing frameworks, asking for data, synthesizing findings, to proposing solutions.

  9. The four types of consulting case interviews

    Type #1: Interviewee led cases. This is the most common type of case interview and it's used extensively by BCG, Bain, Deloitte, Accenture and many other firms. The only notable exception to this is McKinsey, who uses more interviewer-led cases. Interviewee-led simply means that the pace, flow and content of the case interview itself will be ...

  10. How To Write A Consulting Case Study: Guide, Template, & Examples

    By Michael Zipursky 15 Comments When you deliver a successful project, do you publish a consulting case study about it? A consulting case study is a short story about a successful project that explains… The problem your client was dealing with before hiring you; your expertise and process for solving that problem;

  11. Case interview prep: The definitive guide

    The problems you have to solve in a case interview are diverse both in terms of industry (Hospitality, Transportation, Chemical, Banking, Oil & Gas, Private Equity, etc.) and business situation (improving sales or profits, decreasing costs, rethinking an organization, acquiring a company, etc.)

  12. Case Interview: The Ultimate Consulting Guide (2024)

    A case interview is a type of job interview in which the candidate must analyze and solve a problematic business scenario ("case study"). It is used to simulate the situation on-the-job and to find out if the respective candidate meets the necessary analytical and communications skills required for the profession.

  13. Consulting Case Study Interviews

    Case Interview Bootcamp - An online bootcamp to help you prepare for your case study interviews. Case Maths- A tool to help you practice mental arithmetic. Case Questions; Consulting Case 101 - a resource offering lots of cases by industry, by case type and by consulting firm and a Case Partner opportunity to practice with others in your area.

  14. Top 10 Case Interview Frameworks: Beginner Mistakes

    Five mini-frameworks - All-purpose tools Other case interview frameworks Applying frameworks in case interviews Let's practice! Case interview frameworks - Overview What are case interview frameworks? Case interview frameworks are templates used to break down and solve business problems in case interviews.

  15. Case Library

    Video Coach Created A case library of 600+ case study examples to get you ready for your case interview! McKinsey, BCG, Bain & 20+ other firm styles represented!

  16. Case Interview Frameworks: The Ultimate Guide (2024)

    Case interview frameworks or consulting frameworks are arguably the most critical component of a case interview. Outstanding case frameworks set you up for success for the case while poor frameworks make the case difficult to solve. Struggling on how to use frameworks in your case interviews? Unsure of which frameworks to use?

  17. Identify Your Case Type

    1 related question Growth Strategy Learn everything about the Growth Strategies for your case interview while applying for a job in consulting or in a big accounting firm. M&A M&A is often the answer to broader problems presented in your case studies. Learn the Key areas to analyze: assets, target, industry, and feasibility! Competitive Response

  18. Business consulting case studies: PwC

    Business consulting case studies: PwC PwC case studies Examples of how a community of solvers brings together the strengths of people and technology to build trust and deliver sustainable outcomes — bringing The New Equation to life. Featured Reinventing Wyndham's loyalty program technology

  19. 47 case interview examples (from McKinsey, BCG, Bain, etc.)

    So in this article, we have listed all the best free case examples available, in one place. The below list of resources includes interactive case interview samples provided by consulting firms, video case interview demonstrations, case books, and materials developed by the team here at IGotAnOffer. Let's continue to the list. McKinsey examples

  20. PDF The 4 Types of Case Studies

    The game you play in case interviews is showing the interviewer how you think (and not finding an answer to the case question) Most cases can be categorized into 4 buckets. The case category drives. how you should structure your approach to solve the case. How to ask specific and thoughtful questions that clarify the case.

  21. What Are The Different Types of Consulting Case Study Interviews?

    Merger and acquisition (M&A) cases are a common type of case study interview in the consulting industry. Companies often consider mergers or acquisitions as a way to grow their business, acquire new technologies, or increase market share. As a consultant, it's important to assess the financial, operational, and strategic aspects of a ...

  22. Case Studies

    Undaunted by global disruption, a logistics company embraces bold transformation. December 2, 2022 -. ECU Worldwide, one of the largest less-than-container-load shipping companies in the world, chose to innovate during the COVID-19 pandemic, working with McKinsey to become tech enabled and revamp its organizational structure.

  23. Consulting Business Ideas: 15 Types of Consulting Jobs (2024)

    Marketing consulting is one of the broadest consulting modalities. Depending on the companies you're working with—and which stage of development they're at—your marketing consultancy might include conducting market research , creating a marketing budget, developing a digital marketing plan, or building out an email marketing strategy .